SIST EN ISO 13482:2014
(Main)Robots and robotic devices - Safety requirements for non-industrial robots - Non-medical personal care robot (ISO 13482:2014)
Robots and robotic devices - Safety requirements for non-industrial robots - Non-medical personal care robot (ISO 13482:2014)
EN ISO 13482 specifies requirements and guidelines for the inherently safe design, protective measures, and information for use of personal care robots, in particular the following three types of personal care robots: - mobile servant robot; - physical assistant robot; - person carrier robot. These robots typically perform tasks to improve the quality of life of intended users, irrespective of age or capability. This International Standard describes hazards associated with the use of these robots, and provides requirements to eliminate, or reduce, the risks associated with these hazards to an acceptable level. This International Standard covers human-robot physical contact applications. This International Standard presents significant hazards and describes how to deal with them for each personal care robot type. This International Standard covers robotic devices used in personal care applications, which are treated as personal care robots. This International Standard is limited to earthbound robots. This International standard does not apply to: - robots travelling faster than 20 km/h; - robot toys; - water-borne robots and flying robots; - industrial robots, which are covered in ISO 10218; - robots as medical devices; - military or public force application robots. The scope of this International Standard is limited primarily to human care related hazards but, where appropriate, it includes domestic animals or property (defined as safety-related objects), when the personal care robot is properly installed and maintained and used for its intended purpose or under conditions which can reasonably be foreseen. This International Standard is not applicable to robots manufactured prior to its publication date. This International Standard deals with all significant hazards, hazardous situations or hazardous events as described in Annex A. Attention is drawn to the fact that for hazards related to impact (e.g. due to a collision) no exhaustive and internationally recognized data (e.g. pain or injury limits) exist at the time of publication of this International Standard.
Roboter und Robotikgeräte - Sicherheitsanforderungen - Nicht-medizinische Haushalts- und Assistenzroboter (ISO 13482:2014)
Diese Internationale Norm legt Anforderungen und Anleitungen für eine inhärent sichere Konstruktion, Schutzmaßnahmen und die Benutzerinformation zur Anwendung von persönlichen Assistenzrobotern fest, insbesondere im Hinblick auf die folgenden drei Arten von persönlichen Assistenzrobotern:
mobiler Roboterassistent;
bewegungsunterstützender Roboter;
Personenbeförderungsroboter.
Diese Roboter führen gewöhnlich Aufgaben aus, die die Lebensqualität der vorgesehenen Benutzer unab¬hängig von deren Alter oder Fähigkeiten verbessern. In dieser Internationalen Norm sind Gefährdungen beschrieben, die mit der Anwendung dieser Roboter verbunden sind, sowie Anforderungen dahingehend enthalten, wie die mit diesen Gefährdungen zusammenhängenden Risiken beseitigt oder auf ein annehm¬bares Niveau verringert werden können. Diese Internationale Norm deckt Anwendungen ab, die den physischen Kontakt zwischen Mensch und Roboter vorsehen.
Diese Internationale Norm stellt signifikante Gefährdungen vor und beschreibt, wie mit diesen Gefährdungen bei jedem der persönlichen Assistenzrobotertypen umzugehen ist.
Diese Internationale Norm deckt auch Robotikgeräte ab, die in persönlichen Assistenzanwendungen eingesetzt werden; diese werden wie persönliche Assistenzroboter behandelt.
Diese Internationale Norm beschränkt sich auf erdgebundene Roboter.
Diese Internationale Norm gilt nicht für:
Roboter, die sich mit mehr als 20 km/h fortbewegen;
Spielzeugroboter;
Wassergebundene Roboter und Flugroboter;
Industrieroboter, abgedeckt durch ISO 10218;
Roboter als medizinische Geräte;
Roboter für militärische Anwendungen oder zur Ausübung der öffentlichen Gewalt.
ANMERKUNG Die in dieser Internationalen Norm festgelegten Sicherheitsgrundsätze können für die vorstehend aufgeführten Roboter ebenfalls nützlich sein.
Der Anwendungsbereich dieser Internationalen Norm beschränkt sich vorwiegend auf Gefährdungen im Zusammenhang mit der Unterstützung von Personen, erstreckt sich jedoch gegebenenfalls auch auf Haus- und Nutztiere und Gegenstände (definiert als sicherheitsrelevante Objekte), wenn der persönliche Assistenzroboter ordnungsgemäß installiert ist und instand gehalten wird und für den vorgesehenen Zweck verwendet oder unter Bedingungen eingesetzt wird, die vernünftigerweise vorhersehbar sind.
Diese Internationale Norm gilt nicht für Roboter, die vor dem Veröffentlichungsdatum dieser Internationalen Norm hergestellt wurden.
Diese Internationale Norm behandelt alle wesentlichen Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse wie in Anhang A beschrieben. Es wird darauf hingewiesen, dass zum Zeitpunkt der Veröffentlichung dieser Internationalen Norm für Gefährdungen in Zusammenhang mit Stoßeinwirkung (z. B. aufgrund von Zusammenstoß) keine umfassenden und international anerkannten Daten (z. B. Schmerz- oder Verletzungsgrenzen) vorliegen.
Robots et composants robotiques - Exigences de sécurité - Robots non médicaux pour les soins personnels (ISO 13482:2014)
L'ISO 13482:2014 spécifie les exigences et les recommandations pour la prévention intrinsèque, ainsi que des mesures de protection et des informations pour l'utilisation des robots d'assistance à la personne, en trois types de robots d'assistance à la personne:
robot d'assistance à la personne mobile;
robot d'assistance physique;
robot de transport de personne.
Ces robots exécutent habituellement des tâches pour améliorer la qualité de vie d'utilisateurs prévus, indépendamment de leur âge ou de leurs aptitudes. La présente Norme internationale décrit les phénomènes dangereux associés à l'utilisation de ces robots et fournit des exigences pour éliminer ou réduire les risques associés à ces phénomènes dangereux. La présente Norme internationale traite des applications avec contact physique homme-robot.
L'ISO 13482:2014 présente les phénomènes dangereux significatifs et décrit la manière de les traiter pour chaque type de robot d'assistance à la personne.
L'ISO 13482:2014 couvre les appareils robotisés utilisés dans le cadre d'applications d'assistance à la personne, qui sont traités comme des robots d'assistance à la personne.
L'ISO 13482:2014 est limitée aux robots terrestres.
L'ISO 13482:2014 ne s'applique pas aux
robots circulant à plus de 20 km/h,
robots jouets,
robots aquatiques et robots volants,
robots industriels, qui sont couverts par l'ISO 10218,
robots utilisés comme dispositifs médicaux,
robots pour applications militaires ou de maintien de l'ordre public.
Roboti in robotske naprave - Varnostne zahteve za neindustrijske robote - Nemedicinski roboti za osebno uporabo (ISO 13482:2014)
EN ISO 13482 določa zahteve in smernice za v osnovi varno projektiranje, zaščitne ukrepe in informacije za uporabo robotov za osebno uporabo, zlasti naslednjih treh vrst robotov za osebno uporabo: – robotski mobilni služabnik; – robotski fizični asistent; – robotski prevoznik oseb. Ti roboti običajno opravljajo opravila, s katerimi izboljšajo kakovost življenja uporabnikov, ne glede na njihovo starost ali zmogljivost. Ta mednarodni standard opisuje nevarnosti, povezane z uporabo teh robotov, in podaja zahteve za odpravljanje ali zmanjševanje tveganj, povezanih s temi nevarnostmi, na sprejemljivo raven. Ta mednarodni standard zajema vrste uporabe, pri katerih pride do fizičnega stika med posameznikom in robotom. Ta mednarodni standard navaja večja tveganja in opisuje, kako ravnati ob njih, za vsako vrsto robotov za osebno uporabo. Ta mednarodni standard zajema robotske naprave za osebno uporabo, ki se obravnavajo kot roboti za osebno uporabo. Ta mednarodni standard zajema samo robote za uporabo na Zemlji. Ta mednarodni standard se ne uporablja za: – robote, ki potujejo s hitrostjo, večjo od 20 km/h; – robotske igračke;– robote za uporabo na vodi in v zraku; – industrijske robote, ki jih zajema ISO 10218; – robote kot medicinske pripomočke; – robote za vojaško ali policijsko uporabo. Področje uporabe tega mednarodnega standarda je omejeno predvsem na nevarnosti, povezane z osebno uporabo, toda, kjer je primerno, vključuje domače živali ali lastnino (opredeljeno kot predmeti, povezani z varnostjo), ko je robot za osebno uporabo pravilno nameščen in vzdrževan ter se uporablja za predvideni namen ali pod pogoji, ki jih je mogoče razumno predvidevati. Ta mednarodni standard se ne uporablja za robote, proizvedene pred datumom objave standarda. Ta mednarodni standard opisuje vsa večja tveganja, nevarne situacije ali dogodke, kot so predstavljeni v Dodatku A. Opozoriti je treba na dejstvo, da za tveganja, povezana z udarom (npr. zaradi trčenja), ni obširnih in mednarodno priznanih podatkov (npr. omejitve glede bolečin ali poškodb) v času objave tega mednarodnega standarda.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 13482:2014
01-julij-2014
Roboti in robotske naprave - Varnostne zahteve za neindustrijske robote -
Nemedicinski roboti za osebno uporabo (ISO 13482:2014)
Robots and robotic devices - Safety requirements for non-industrial robots - Non-medical
personal care robot (ISO 13482:2014)
Roboter und Robotikgeräte - Sicherheitsanforderungen - Nicht-medizinische Haushalts-
und Assistenzroboter (ISO 13482:2014)
Robots et composants robotiques - Exigences de sécurité - Robots non médicaux pour
les soins personnels (ISO 13482:2014)
Ta slovenski standard je istoveten z: EN ISO 13482:2014
ICS:
25.040.30 Industrijski roboti. Industrial robots.
Manipulatorji Manipulators
SIST EN ISO 13482:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 13482:2014
---------------------- Page: 2 ----------------------
SIST EN ISO 13482:2014
EUROPEAN STANDARD
EN ISO 13482
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2014
ICS 25.040.30
English Version
Robots and robotic devices - Safety requirements for personal
care robots (ISO 13482:2014)
Robots et composants robotiques - Exigences de sécurité Roboter und Robotikgeräte - Sicherheitsanforderungen für
pour les robots de soins personnels (ISO 13482:2014) nicht-industrielle Roboter - Nichtmedizinische Haushalts
und Assistenzroboter (ISO 13482:2014)
This European Standard was approved by CEN on 4 January 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13482:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 13482:2014
EN ISO 13482:2014 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 13482:2014
EN ISO 13482:2014 (E)
Foreword
This document (EN ISO 13482:2014) has been prepared by Technical Committee ISO/TC 184 “Automation
systems and integration” in collaboration with Technical Committee CEN/TC 310 “Advanced automation
technologies and their applications” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2014, and conflicting national standards shall be withdrawn at
the latest by August 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 13482:2014 has been approved by CEN as EN ISO 13482:2014 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 13482:2014
EN ISO 13482:2014 (E)
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directive 2006/42/EC Machinery safety.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard confers, within the limits of the scope of this standard, a presumption of conformity with the
relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING: Other requirements and other EU Directives may be applicable to the products falling within the
scope of this standard.
4
---------------------- Page: 6 ----------------------
SIST EN ISO 13482:2014
INTERNATIONAL ISO
STANDARD 13482
First edition
2014-02-01
Robots and robotic devices — Safety
requirements for personal care robots
Robots et composants robotiques — Exigences de sécurité pour les
robots de soins personnels
Reference number
ISO 13482:2014(E)
©
ISO 2014
---------------------- Page: 7 ----------------------
SIST EN ISO 13482:2014
ISO 13482:2014(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 13482:2014
ISO 13482:2014(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 3
4 Risk assessment . 9
4.1 General . 9
4.2 Hazard identification . 9
4.3 Risk estimation . 9
5 Safety requirements and protective measures .10
5.1 General .10
5.2 Hazards related to charging battery .11
5.3 Hazards due to energy storage and supply .12
5.4 Robot start-up and restart of regular operation .14
5.5 Electrostatic potential .15
5.6 Hazards due to robot shape .16
5.7 Hazards due to emissions .17
5.8 Hazards due to electromagnetic interference .21
5.9 Hazards due to stress, posture and usage .22
5.10 Hazards due to robot motion .23
5.11 Hazards due to insufficient durability .31
5.12 Hazards due to incorrect autonomous decisions and actions .33
5.13 Hazards due to contact with moving components .34
5.14 Hazards due to lack of awareness of robots by humans .35
5.15 Hazardous environmental conditions .35
5.16 Hazards due to localization and navigation errors .37
6 Safety-related control system requirements .38
6.1 Required safety performance .38
6.2 Robot stopping .40
6.3 Limits to operational spaces .43
6.4 Safety-related speed control .44
6.5 Safety-related environmental sensing .44
6.6 Stability control .46
6.7 Safety-related force control .47
6.8 Singularity protection .47
6.9 Design of user interface .48
6.10 Operational modes .49
6.11 Manual control devices .51
7 Verification and validation .52
8 Information for use .52
8.1 General .52
8.2 Markings or indications .53
8.3 User manual .55
8.4 Service manual .56
Annex A (informative) List of significant hazards for personal care robots .58
Annex B (informative) Examples of operational spaces for personal care robots .66
Annex C (informative) Example of the implementation of a safeguarded space .69
Annex D (informative) Examples of functional tasks of personal care robots .72
Annex E (informative) Examples of markings for personal care robots .75
© ISO 2014 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 13482:2014
ISO 13482:2014(E)
Bibliography .77
iv © ISO 2014 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 13482:2014
ISO 13482:2014(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directives
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received. www.iso.org/patents
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
The committee responsible for this document is ISO/TC 184, Automation systems and integration,
Subcommittee SC 2, Robots and robotic devices.
© ISO 2014 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 13482:2014
ISO 13482:2014(E)
Introduction
This International Standard has been developed in recognition of the particular hazards presented by
newly emerging robots and robotic devices for new applications in non-industrial environments for
providing services rather than manufacturing applications in industrial applications. This International
Standard focuses on the safety requirements for personal care robots in non-medical applications.
This International Standard complements ISO 10218-1, which covers the safety requirements for robots
in industrial environments only. This International Standard includes additional information in line
with ISO 12100 and adopts the approach proposed in ISO 13849 and IEC 62061 to formulate a safety
standard for robots and robotic devices in personal care to specify the conditions for physical human-
robot contact.
This International Standard is a type-C standard, as stated in ISO 12100.
When a type-C standard deviates from one or more technical provisions dealt with by type-A or by
type-B standards, the type-C standard takes precedence.
It is recognized that robots and robotic devices in personal care applications require close human-robot
interaction and collaborations, as well as physical human-robot contact.
The robots or robotic devices concerned, and the extent to which hazards, hazardous situations or
hazardous events are covered, are indicated in the scope of this International Standard.
Hazards are well recognized, and the sources of the hazards are frequently unique to particular robot
systems. The number and types of hazards are directly related to the nature of the robot application, the
complexity of the installation, and the level of human-robot interaction incorporated.
The risks associated with these hazards vary with the type of robot used and its purpose, and the way
in which it is installed, programmed, operated, and maintained.
Not all of the hazards identified by this International Standard apply to every personal care robot,
nor will the level of risk associated with a given hazardous situation be the same from robot to robot.
Consequently, the safety requirements, and/or protective measures can vary from what is specified
in this International Standard. A risk assessment is conducted to determine the protective measures
needed when they do not meet safety requirements and/or protective measures specified in this
International Standard, and for the particular application being considered.
In this International Standard, the following verbal forms are used:
— “shall” indicates a requirement;
— “should” indicates a recommendation;
— “may” indicates a permission;
— “can” indicates a possibility or a capability.
In recognition of the variable nature of hazards with personal care robot applications, this International
Standard provides guidance for the assurance of safety in the design and construction of the non-medical
personal care robot, as well as the integration, installation, and use of the robots during their full life
cycle. Since safety in the use of personal care robots is influenced by the design of the particular robot
system, a supplementary, though equally important, purpose is to provide guidelines for the information
for use of personal care robots and robotic devices.
The safety requirements of this International Standard have to be met by the manufacturer and the
supplier of the personal care robot.
Future editions of this International Standard might include more specific requirements on particular
types of personal care robots, as well as more complete numeric data for different categories of people
(e.g. children, elderly persons, pregnant women).
vi © ISO 2014 – All rights reserved
---------------------- Page: 12 ----------------------
SIST EN ISO 13482:2014
INTERNATIONAL STANDARD ISO 13482:2014(E)
Robots and robotic devices — Safety requirements for
personal care robots
1 Scope
This International Standard specifies requirements and guidelines for the inherently safe design,
protective measures, and information for use of personal care robots, in particular the following three
types of personal care robots:
— mobile servant robot;
— physical assistant robot;
— person carrier robot.
These robots typically perform tasks to improve the quality of life of intended users, irrespective of age
or capability. This International Standard describes hazards associated with the use of these robots, and
provides requirements to eliminate, or reduce, the risks associated with these hazards to an acceptable
level. This International Standard covers human-robot physical contact applications.
This International Standard presents significant hazards and describes how to deal with them for each
personal care robot type.
This International Standard covers robotic devices used in personal care applications, which are treated
as personal care robots.
This International Standard is limited to earthbound robots.
This International standard does not apply to:
— robots travelling faster than 20 km/h;
— robot toys;
— water-borne robots and flying robots;
— industrial robots, which are covered in ISO 10218;
— robots as medical devices;
— military or public force application robots.
NOTE The safety principles established in this International Standard can be useful for these robots listed
above.
The scope of this International Standard is limited primarily to human care related hazards but, where
appropriate, it includes domestic animals or property (defined as safety-related objects), when the
personal care robot is properly installed and maintained and used for its intended purpose or under
conditions which can reasonably be foreseen.
This International Standard is not applicable to robots manufactured prior to its publication date.
This International Standard deals with all significant hazards, hazardous situations or hazardous events
as described in Annex A. Attention is drawn to the fact that for hazards related to impact (e.g. due to a
collision) no exhaustive and internationally recognized data (e.g. pain or injury limits) exist at the time
of publication of this International Standard.
© ISO 2014 – All rights reserved 1
---------------------- Page: 13 ----------------------
SIST EN ISO 13482:2014
ISO 13482:2014(E)
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 2631 (all parts), Mechanical vibration and shock — Evaluation of human exposure to whole-body
vibration
ISO 3746, Acoustics — Determination of sound power levels and sound energy levels of noise sources using
sound pressure — Survey method using an enveloping measurement surface over a reflecting plane
ISO 3864-1, Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs
and safety markings
ISO 4413, Hydraulic fluid power — General rules and safety requirements for systems and their components
ISO 4414, Pneumatic fluid power — General rules and safety requirements for systems and their components
ISO 4871, Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 7000, Graphical symbols for use on equipment — Registered symbols
ISO 7010, Graphical symbols — Safety colours and safety signs — Registered safety signs
ISO 8373:2012, Robots and robotic devices — Vocabulary
ISO 11202, Acoustics — Noise emitted by machinery and equipment — Determination of emission sound
pressure levels at a work station and at other specified positions applying approximate environmental
corrections
ISO 12100:2010, Safety of machinery — General principles for design — Risk assessment and risk reduction
ISO 13849-1, Safety of machinery — Safety-related parts of control systems — Part 1: General principles
for design
ISO 13850, Safety of machinery — Emergency stop — Principles for design
ISO 13854, Safety of machinery — Minimum gaps to avoid crushing of parts of the human body
1)
ISO 13855 , Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts
of the human body
ISO 13856 (all parts), Safety of machinery — Pressure-sensitive protective devices
ISO 13857, Safety of machinery — Safety distances to prevent hazard zones being reached by upper and
lower limbs
ISO 14118, Safety of machinery — Prevention of unexpected start-up
ISO 14119, Safety of machinery — Interlocking devices associated with guards — Principles for design and
selection
ISO 14120, Safety of machinery — Guards — General requirements for the design and construction of fixed
and movable guards
1
ISO 15534 (all parts), Ergonomic design for the safety of machinery
IEC 60204-1:2009, Safety of machinery — Electrical equipment of machines — Part 1: General requirements
IEC 60335-1, Household and similar electrical appliances — Safety — Part 1: General requirements
1) If used, consideration shall be given as to the relevance and applicability of the quantitative data to the intended
users of the robot, especially for elderly people and children.
2 © ISO 2014 – All rights reserved
---------------------- Page: 14 ----------------------
SIST EN ISO 13482:2014
ISO 13482:2014(E)
IEC 60335-2-29, Household and similar electrical appliances — Safety — Part 2-29: Particular requirements
for battery chargers
IEC 60417-1, Graphical symbols for use on equipment — Part 1: Overview and application
IEC 60529, Degrees of protection provided by enclosures (IP Code)
IEC 60825-1, Safety of laser products — Part 1: Equipment classification and requirements
IEC 61140, Protection against electric shock — Common aspects for installation and equipment
IEC 61496 (all parts), Safety of machinery — Electro-sensitive protective equipment
IEC 62061:2012, Safety of machinery — Functional safety of safety-related electrical, electronic and
programmable electronic control systems
IEC 62471, Photobiological safety of lamps and lamp systems
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 12100, ISO 8373 and the
following apply.
3.1
autonomy
ability to perform intended tasks based on current state and sensing, without human intervention
[SOURCE: ISO 8373:2012, 2.2]
3.2
robot
actuated mechanism programmable in two or more axes with a degree of autonomy (3.1) moving within
its environment, to perform intended tasks
[SOURCE: ISO 8373:2012, 2.6, modified]
3.3
robotic device
actuated mechanism fulfilling the characteristics of an industrial robot or a service robot (3.4), but
lacking either the number of programmable axes or the degree of autonomy (3.1)
[SOURCE: ISO 8373:2012, 2.8, modified]
3.4
service robot
robot (3.2) that performs useful tasks for humans or equipment excluding industrial automation
applications
[SOURCE: ISO 8373:2012, 2.10, modified]
3.5
mobile robot
robot (3.2) able to travel under its own control
[SOURCE: ISO 8373:2012, 2.13, modi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.