iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61310-1:1999

(Main)

Safety of machinery - Indication, marking and actuation -- Part 1: Requirements for visual, auditory and tactile signals

Safety of machinery - Indication, marking and actuation -- Part 1: Requirements for visual, auditory and tactile signals

Specifies requirements for visual auditory and tactile methods of indicating safety related information. Specifies a system of colours, safety signs, markings and other warnings, intended for use for the indication of hazardous situations.

Sicherheit von Maschinen - Anzeigen, Kennzeichen und Bedienen -- Teil 1: Anforderungen an sichtbare, hörbare und tastbare Signale

Sécurité des machines - Indication, marquage et manoeuvre -- Partie 1: Spécifications pour les signaux visuels, auditifs et tactiles

Spécifie des exigences concernant des méthodes visuelles, auditives et tactiles pour transmettre l'information relative à la sécurité. Définit des règles générales pour un système de couleurs, de signaux de sécurité, de marquages et autres avertissements, destinées à être utilisées pour indiquer des situations dangereuses.

Safety of machinery - Indication, marking and actuation -- Part 1: Requirements for visual, auditory and tactile signals (IEC 61310-1:1995 (corrigendum Jul. 1995))

General Information

Status
Withdrawn
Publication Date
30-Jun-1999
Withdrawal Date
14-Sep-2020
ICS
01.080.20 - Graphical symbols for use on specific equipment
13.110 - Safety of machinery
Technical Committee
MOV - Measuring equipment for electromagnetic quantities
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
15-Sep-2020
Due Date
08-Oct-2020
Completion Date
15-Sep-2020
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
73/23/EEC - Electrical equipment designed for use within certain voltage limits
98/37/EC - Machinery
Mandate
BC-CEN-13-88 - BC-CEN-13-88
Ref Project
EN 61310-1:1995 - Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, auditory and tactile signals

Relations

Revised
SIST EN 61310-1:2008 - Safety of machinery - Indication, marking and actuation -- Part 1: Requirements for visual, acoustic and tactile signals
Effective Date
14-Dec-2010
Replaced By
SIST EN 61310-1:2008 - Safety of machinery - Indication, marking and actuation -- Part 1: Requirements for visual, acoustic and tactile signals
Effective Date
07-Jun-2022
Replaced By
SIST EN 61310-1:2008 - Safety of machinery - Indication, marking and actuation -- Part 1: Requirements for visual, acoustic and tactile signals
Effective Date
01-Dec-2010
Replaced By
SIST EN 61310-1:2008 - Safety of machinery - Indication, marking and actuation -- Part 1: Requirements for visual, acoustic and tactile signals
Effective Date
29-Jan-2023

Buy Standard

EN 61310-1:1999EN 61310-1:1999
PreviousNext
Standard
EN 61310-1:1999
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety of machinery - Indication, marking and actuation -- Part 1: Requirements for visual, auditory and tactile signals (IEC 61310-1:1995 (corrigendum Jul. 1995))Sicherheit von Maschinen - Anzeigen, Kennzeichen und Bedienen -- Teil 1: Anforderungen an sichtbare, hörbare und tastbare SignaleSécurité des machines - Indication, marqu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 61310-2:2008
Safety of machinery - Indication, marking and actuation -- Part 2: Requirements for marking
EN 61310-2:2008

This part of IEC 61310 specifies requirements for the marking of machinery. It gives general rules on marking for identification of machinery, for safe use related to mechanical and electrical hazards, and for the avoidance of hazards arising from incorrect connections.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61310-3:2008
Safety of machinery - Indication, marking and actuation -- Part 3: Requirements for the location and operation of actuators
EN 61310-3:2008

This part of IEC 61310 specifies safety-related requirements for actuators, operated by the hand or by other parts of the human body, at the human-machine interface. It gives general requirements for - the standard direction of movement for actuators; - the arrangement of an actuator in relation to other actuators; - the correlation between an action and its final effects. It is based on IEC 60447 but is also applicable to non-electrotechnical technologies such as mechanical and fluid-powered systems. It covers single actuators as well as groups of actuators forming part of an assembly. This standard does not specify any requirements for "touch screens" (such information is given in IEC 60073).

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61310-1:2008
Safety of machinery - Indication, marking and actuation -- Part 1: Requirements for visual, acoustic and tactile signals
EN 61310-1:2008

This part of IEC 61310 specifies requirements for visual, acoustic and tactile methods of indicating safety-related information, at the human-machine interface and to exposed persons. It specifies a system of colours, safety signs, markings and other warnings, intended for use in the indication of hazardous situations and health hazards and for meeting certain emergencies. It also specifies ways of coding visual, acoustic and tactile signals for indicators and actuators to facilitate the safe use and monitoring of the machinery. This standard is based on IEC 60073 with regard to coding by colour and alternative means, but is not limited to electrotechnical aspects.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60445:2021(Main)
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors (IEC 60445:2021)
EN IEC 60445:2021

This document applies to the identification and marking of terminals of electrical equipment
such as resistors, fuses, relays, contactors, transformers, rotating machines and, wherever
applicable, to combinations of such equipment (e.g. assemblies), and it also applies to the
identification of terminations of certain designated conductors. It also provides general rules for
the use of certain colours or alphanumeric notations to identify conductors with the aim of
avoiding ambiguity and ensuring safe operation. These conductor colours and alphanumeric
notations are intended to be applied on cores, busbars, and electrical equipment, and in cables
or installations.
This basic safety publication focusing on safety essential requirements is primarily intended for
use by technical committees in the preparation of standards in accordance with the principles
laid down in IEC Guide 104 and ISO/IEC Guide 51.
It is not intended for use by manufacturers or certification bodies. One of the responsibilities of
a technical committee is, wherever applicable, to make use of basic safety publications in the
preparation of its publications. The requirements of this basic safety publication will not apply
unless specifically referred to or included in the relevant publications.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61310-2:2008
Safety of machinery - Indication, marking and actuation -- Part 2: Requirements for marking
EN 61310-2:2008

This part of IEC 61310 specifies requirements for the marking of machinery. It gives general rules on marking for identification of machinery, for safe use related to mechanical and electrical hazards, and for the avoidance of hazards arising from incorrect connections.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61310-3:2008
Safety of machinery - Indication, marking and actuation -- Part 3: Requirements for the location and operation of actuators
EN 61310-3:2008

This part of IEC 61310 specifies safety-related requirements for actuators, operated by the hand or by other parts of the human body, at the human-machine interface. It gives general requirements for - the standard direction of movement for actuators; - the arrangement of an actuator in relation to other actuators; - the correlation between an action and its final effects. It is based on IEC 60447 but is also applicable to non-electrotechnical technologies such as mechanical and fluid-powered systems. It covers single actuators as well as groups of actuators forming part of an assembly. This standard does not specify any requirements for "touch screens" (such information is given in IEC 60073).

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61310-1:2008
Safety of machinery - Indication, marking and actuation -- Part 1: Requirements for visual, acoustic and tactile signals
EN 61310-1:2008

This part of IEC 61310 specifies requirements for visual, acoustic and tactile methods of indicating safety-related information, at the human-machine interface and to exposed persons. It specifies a system of colours, safety signs, markings and other warnings, intended for use in the indication of hazardous situations and health hazards and for meeting certain emergencies. It also specifies ways of coding visual, acoustic and tactile signals for indicators and actuators to facilitate the safe use and monitoring of the machinery. This standard is based on IEC 60073 with regard to coding by colour and alternative means, but is not limited to electrotechnical aspects.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-4:2023(Main)
Extenders - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:2022)
EN ISO 3262-4:2023

This document specifies requirements and corresponding methods of test for whiting.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day