Set of printing inks for letterpress printing -- Colorimetric characteristics

Gamme d'encres primaires pour la typographie -- Caractéristiques colorimétriques

Procesne tiskarske barve za knjigotisk - Kolorimetrične značilnosti

General Information

Status
Withdrawn
Publication Date
30-Apr-1996
Withdrawal Date
31-Oct-2002
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Nov-2002
Due Date
01-Nov-2002
Completion Date
01-Nov-2002

Relations

Buy Standard

Standard
ISO 2845:1975 - Set of printing inks for letterpress printing -- Colorimetric characteristics
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 2845:1996
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 2845:1975 - Gamme d'encres primaires pour la typographie -- Caractéristiques colorimétriques
French language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL STANDARD
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEXKL(YHAPOAHAA OPrAHA3AUHR II0 CïAHfiAPTki3AUMA .ORGANISATION INTERNATIONALE DE NORMALISATION
Set of printing inks for letterpress printing - Colorimetric
characteristics
Gamme d'encres primaires pour la typographie - Caractéristiques colorimétriques
First edition - 1975-07-15
- w UDC 667.5
Ref. No. IS0 2845-1975 (E)
KY
PI
m
F
Descriptors : typography, colour printing, printing inks, colorimetric characteristics.
LA
w
m
N
E
Price based on 5 pages

---------------------- Page: 1 ----------------------
FOREWORD
IS0 (the International Organization for Standardization) is a worldwide federation
of national standards institutes (IS0 Member Bodies). The work of developing
International Standards is carried out through IS0 Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the IS0 Council.
International Standard IS0 2845 was drawn up by Technical Committee
ISO/TC 130, Graphic technology, and circulated to the Member Bodies in August
1972.
It has been approved by the Member Bodies of the following countries :
Austria" Germany Spain
Chile India Sweden
Czechoslovakia New Zealand Switzerland
Egypt, Arab Rep. of Poland Thai land
Turkey
Finland** Romania
South Africa, Rep. of United Kingdom
France
with the exception of sub-clause 4.4.
** with the exception of sub-clause 4.3.
No Member Body expressed disapproval of the document.

---------------------- Page: 2 ----------------------
IS0 2845-1975 (E)
INTERNATIONAL STANDARD
Set of printing inks for letterpress printing - Colorimetric
character istics
O INTRODUCTION which primary and secondary colours are obtained
conforming to the set defined in this International Standard
This International Standard is in technical conformity with
when printed on reference paper and with the reference
CE1 specification 12-66 of the European Committee of the
ink film thickness given in 3.3.
Paint and Printinq Ink Manufacturers' Association defining
- -
a "European set of primary colours for letterpress
3.2 standard set : A complete series of primary inks
printing".
intended for three- or four-colour printing of which the
colorimetric characteristics comply with the specifications
of this International Standard.
1 SCOPE AND FIELD OF APPLICATION
This International Standard specifies a set of colours for a
3.3 reference film thickness of ink : Thickness of a printed
series of primary inks intended for three- or four-colour
film when printed solid on reference paper, of which the
letterpress printing, in defined order of printed colour, and
value is exactly 1 pm.
describes the control method.
3.4 reference paper : Coated paper as specified in
It will enable
IS0 2834.
a) photo-engravers to prepare blocks based on the same
colours and suitable for application on the same printing
3.5 primary colours : Colours of individual prints from
forme irrespective of origin;
yellow, magenta and cyan inks produced under standard
conditions, and of which the colorimetric definitions
b) photo-engravers and printers to obtain printing inks
correspond to the numerical values given in 4.2.
which, when they are applied to a reference paper and at
standard thickness, give results complying with the
3.6 secondary colours : Colours obtained by overprinting
specifications of this International Standard.
primary colours two at a time :
NOTE - This International Standard does not apply to fluorescent
inks, Pigments are not covered by this International Standard
yellow + magenta,
thereby avoiding prejudice to future development in pigment pro-
duction.
ye1 low + cyan,
magenta + cyan,
2 REFERENCES
in the conditions specified in this International Standard
and with the colorimetric definitions corresponding to the
IS0 2834, Printing inks - Preparation of standard prints
numerical values shown in 4.2. The order of the
for determination of resistance to physical and chemical
overprinting of the primary colours is not - subject to
agents.
specification to the contrary - laid down, but it must be
IS0 2835, Prints and printing inks - Assessment of light
stated in the test report.
fastness.
IS0 2837, Prints and printing inks - Assessment of resist-
ance to solvents.
4 TESTMETHOD
IS0 2846, Set of printing inks for offset printing-
Colorimetric characteristics.
4.1 Principle
Each colour in the set obtained by printing (or
3 DEFINITIONS
overprinting) reference inks under the conditions specified
in 5.2 is assessed according to its visual appearance by the
For the purpose of this International Standard the
values of the colorimetric steps established from
following definitions apply :
measurements made in accordance with the spectrophoto-
metric methods of colorimetry.
3.1 reference inks : Yellow, magenta and cyan inks from
1

---------------------- Page: 3 ----------------------
IS0 2845-1975 (E)
on either side of the required reference thickness of 1 pm.
Reference inks are printed solid, either alone (primary
By interpolation the precise colorimetric values are
colours) or overprinted (secondary colours) at the reference
determined which relate to a given film thickness.
thickness and on reference paper.
4.4 Colorimetric measurement of test specimens
NOTE - The colours chosen are those which offer the best possible
lightfastness (see IS0 2835) and resistance to solvents (see
The prints (or overprints), when completely dry, are
IS0 2837) in order that prints may be varnished.
spectrophotometrically measured in accordance with the
recommendations of the CIE2), placing them on a pile of at
4.2 Colorimetric characteristics and tolerances
least five unprinted sheets of the reference paper before
assessment.
The table below gives the numerical values of the
colorimetric characteristics of the specified primary and
The spectrophotometric curve is plotted using a
secondary colours. Tristimulus coefficients X, Y and Z have
spectrophotometer with 45/0 geometry, in other words
been established in accordance with the recommendations
with the incident light at 45" to the specimen and
of the 1931 meeting of the CIE'). They are determined for
measurement at right angles to it. The percentage spectral
Illuminant C.
reflectance is expressed relative to a reference surface of
pure magnesium oxide, freshly prepared and obtained by
Numerical values of the uniform colour space coefficients
gradually depositing small quantities of vaporized
U*, V* and W* derived from the above and the colour
magnesium oxide until an increase in reflectance is no
difference A€,IE are calculated according to the 1964 CIE
longer obtained between successive deposits (at least
recommendations (CIE vocabulary - definition 45-15-185).
0,5 mm thickness).
The chromaticity co-ordinates x and y and the luminance Y
Calculations from the spectrophotometric curves are made
have been included in the table below and may if desired be
fo
...

SLOVENSKI STANDARD
SIST ISO 2845:1996
01-maj-1996
3URFHVQHWLVNDUVNHEDUYH]DNQMLJRWLVN.RORULPHWULþQH]QDþLOQRVWL
Set of printing inks for letterpress printing -- Colorimetric characteristics
Gamme d'encres primaires pour la typographie -- Caractéristiques colorimétriques
Ta slovenski standard je istoveten z: ISO 2845:1975
ICS:
87.080 Barvila. Tiskarske barve Inks. Printing inks
SIST ISO 2845:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 2845:1996

---------------------- Page: 2 ----------------------

SIST ISO 2845:1996
INTERNATIONAL STANDARD
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEXKL(YHAPOAHAA OPrAHA3AUHR II0 CïAHfiAPTki3AUMA .ORGANISATION INTERNATIONALE DE NORMALISATION
Set of printing inks for letterpress printing - Colorimetric
characteristics
Gamme d'encres primaires pour la typographie - Caractéristiques colorimétriques
First edition - 1975-07-15
- w UDC 667.5
Ref. No. IS0 2845-1975 (E)
KY
PI
m
F
Descriptors : typography, colour printing, printing inks, colorimetric characteristics.
LA
w
m
N
E
Price based on 5 pages

---------------------- Page: 3 ----------------------

SIST ISO 2845:1996
FOREWORD
IS0 (the International Organization for Standardization) is a worldwide federation
of national standards institutes (IS0 Member Bodies). The work of developing
International Standards is carried out through IS0 Technical Committees. Every
Member Body interested in a subject for which a Technical Committee has been set
up has the right to be represented on that Committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the Technical Committees are circulated
to the Member Bodies for approval before their acceptance as International
Standards by the IS0 Council.
International Standard IS0 2845 was drawn up by Technical Committee
ISO/TC 130, Graphic technology, and circulated to the Member Bodies in August
1972.
It has been approved by the Member Bodies of the following countries :
Austria" Germany Spain
Chile India Sweden
Czechoslovakia New Zealand Switzerland
Egypt, Arab Rep. of Poland Thai land
Turkey
Finland** Romania
South Africa, Rep. of United Kingdom
France
with the exception of sub-clause 4.4.
** with the exception of sub-clause 4.3.
No Member Body expressed disapproval of the document.

---------------------- Page: 4 ----------------------

SIST ISO 2845:1996
IS0 2845-1975 (E)
INTERNATIONAL STANDARD
Set of printing inks for letterpress printing - Colorimetric
character istics
O INTRODUCTION which primary and secondary colours are obtained
conforming to the set defined in this International Standard
This International Standard is in technical conformity with
when printed on reference paper and with the reference
CE1 specification 12-66 of the European Committee of the
ink film thickness given in 3.3.
Paint and Printinq Ink Manufacturers' Association defining
- -
a "European set of primary colours for letterpress
3.2 standard set : A complete series of primary inks
printing".
intended for three- or four-colour printing of which the
colorimetric characteristics comply with the specifications
of this International Standard.
1 SCOPE AND FIELD OF APPLICATION
This International Standard specifies a set of colours for a
3.3 reference film thickness of ink : Thickness of a printed
series of primary inks intended for three- or four-colour
film when printed solid on reference paper, of which the
letterpress printing, in defined order of printed colour, and
value is exactly 1 pm.
describes the control method.
3.4 reference paper : Coated paper as specified in
It will enable
IS0 2834.
a) photo-engravers to prepare blocks based on the same
colours and suitable for application on the same printing
3.5 primary colours : Colours of individual prints from
forme irrespective of origin;
yellow, magenta and cyan inks produced under standard
conditions, and of which the colorimetric definitions
b) photo-engravers and printers to obtain printing inks
correspond to the numerical values given in 4.2.
which, when they are applied to a reference paper and at
standard thickness, give results complying with the
3.6 secondary colours : Colours obtained by overprinting
specifications of this International Standard.
primary colours two at a time :
NOTE - This International Standard does not apply to fluorescent
inks, Pigments are not covered by this International Standard
yellow + magenta,
thereby avoiding prejudice to future development in pigment pro-
duction.
ye1 low + cyan,
magenta + cyan,
2 REFERENCES
in the conditions specified in this International Standard
and with the colorimetric definitions corresponding to the
IS0 2834, Printing inks - Preparation of standard prints
numerical values shown in 4.2. The order of the
for determination of resistance to physical and chemical
overprinting of the primary colours is not - subject to
agents.
specification to the contrary - laid down, but it must be
IS0 2835, Prints and printing inks - Assessment of light
stated in the test report.
fastness.
IS0 2837, Prints and printing inks - Assessment of resist-
ance to solvents.
4 TESTMETHOD
IS0 2846, Set of printing inks for offset printing-
Colorimetric characteristics.
4.1 Principle
Each colour in the set obtained by printing (or
3 DEFINITIONS
overprinting) reference inks under the conditions specified
in 5.2 is assessed according to its visual appearance by the
For the purpose of this International Standard the
values of the colorimetric steps established from
following definitions apply :
measurements made in accordance with the spectrophoto-
metric methods of colorimetry.
3.1 reference inks : Yellow, magenta and cyan inks from
1

---------------------- Page: 5 ----------------------

SIST ISO 2845:1996
IS0 2845-1975 (E)
on either side of the required reference thickness of 1 pm.
Reference inks are printed solid, either alone (primary
By interpolation the precise colorimetric values are
colours) or overprinted (secondary colours) at the reference
determined which relate to a given film thickness.
thickness and on reference paper.
4.4 Colorimetric measurement of test specimens
NOTE - The colours chosen are those which offer the best possible
lightfastness (see IS0 2835) and resistance to solvents (see
The prints (or overprints), when completely dry, are
IS0 2837) in order that prints may be varnished.
spectrophotometrically measured in accordance with the
recommendations of the CIE2), placing them on a pile of at
4.2 Colorimetric characteristics and tolerances
least five unprinted sheets of the reference paper before
assessment.
The table below gives the numerical values of the
colorimetric characteristics of the specified primary and
The spectrophotometric curve is plotted using a
secondary colours. Tristimulus coefficients X, Y and Z have
spectrophotometer with 45/0 geometry, in other words
been established in accordance with the recommendations
with the incident light at 45" to the specimen and
of the 1931 meeting of the CIE'). They are determined for
measurement at right angles to it. The percentage spectral
Illuminant C.
reflectance is expressed relative to a reference surface of
pure magnesium oxide, freshly prepared and obtained by
Numerical values of the uniform colour space coefficients
gradually depositing small quantities of vaporized
U*, V* and W* derived from the above and the colour
magnesium oxide until an increase in reflectance is no
difference A€,IE are calculated acco
...

INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEXAYHAPOAHAR OPïAHH3AUIIR II0 CTAHnAPTH3AUHH -ORGANISATION INTERNATIONALE DE NORMALISATION
0 Gamme d'encres primaires pour la typographie -
Caractéristiques color i métriques
Set of printing inks for letterpress printing - Colorimetric characteristics
Première édition - 1975-07-15
-
Ref. no : IS0 2845-1975 (F)
- LL CDU 667.5
Lo
r-
z
Dexripteurs : typographie, impression en couleur, encre d'imprimerie, caractéristique calorimétrique.
I;,
O
N
'O
Prix basé sur 5 pages
2

---------------------- Page: 1 ----------------------
AVANT-PROPOS
L'IÇO (Organisation Internationale de Normalisation) est une fédération mondiale
d'organismes nationaux de normalisation (Comités Membres ISO). L'élaboration de
Normes Internationales est confiée aux Comités Techniques IÇO. Chaque Comité
Membre intéressé par une étude a le droit de faire partie du Comité Technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I'ISO, participent également aux travaux.
Les Projets de Normes Internationales adoptés par les Comités Techniques sont
soumis aux Comités Membres pour approbation, avant leur acceptation comme
Normes Internationales par le Conseil de I'IÇO.
La Norme Internationale IS0 2845 a été établie par le Comité Technique
IÇO/TC 130, Technologie graphique, et soumise aux Comités Membres en août
1972.
Elle a été approuvée par tes Comités Membres des pays suivants :
Afrique du Sud, Rép. d' Finlande** Royaume-Uni
Allemagne France Suède
Autriche* Inde Suisse
Chili Nouvelle-Zélande Tchécoslovaquie
Égypte, Rép. arabe d' Pologne Thaïlande
Espagne Roumanie
Turquie
à l'exception du paragraphe 4.4.
**
à l'exception du paragraphe 4.3.
Aucun Comité Membre n'a désapprouvé le document.
O Organisation Internationale de Normalisation, 1975 0
Imprimé en Suisse
I

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE
Gamme d‘encres primaires pour la typographie -
Ca rac tér ist i qu es co I or i métriques
O INTRODUCTION 3.1 encres de référence : Encres jaune, magenta et cyan,
qui donnent des couleurs primaires et des couleurs
La présente Norme Internationale est en concordance
secondaires du premier ordre conformes à la gamme définie
technique avec le document CE1 12-66 du Comité
par la présente Norme Internationale, lorsqu’elles sont
Européen des Associations de fabricants de peintures
imprimées en aplat sur un papier de référence, selon
d’imprimerie, définissant une «gamme européenne de
l’épaisseur de référence prévue en 3.3.
couleurs primaires pour la typographie)).
0
3.2 gamme normalisée : Série complète d’encres primaires,
1 OBJET ET DOMAINE D’APPLICATION
destinées à l’impression en trichromie ou en quadrichromie,
et dont les valeurs des caractéristiques colorimétriques sont
La présente Norme Internationale fixe les valeurs des
conformes, pour chacune de ces encres, aux spécifications
caractéristiques colorimétriques d‘une gamme de couleurs
de la présente Norme Internationale.
d’un jeu d‘encres primaires, destinées à l’impression typo-
graphique, en trichromie ou en quadrichromie, selon un
ordre défini d‘impression de couleur, et spécifie la méthode 3.3 épaisseur de référence : Épaisseur d’une impression,
de contrôle correspondante. réalisée en aplat sur papier de référence, et dont la valeur
est exactement 1 pm.
Elle doit permettre
3.4 papier de référence : Papier couché, tel qu’il est défini
a) aux photograveurs, de préparer des clichés basés sur
dans I‘ISO 2834.
les mêmes couleurs, et susceptibles d’être assemblés sur
une même forme imprimante, malgré des origines
éventuellement différentes;
3.5 couleurs primaires : Couleurs des impressions individu-
elles des encres jaune, magenta, cyan, exécutées dans les
b) aux photograveurs et aux imprimeurs, de se procurer
conditions prévues dans la présente Norme Internationale,
des encres d’imprimerie qui, lorsqu’elles sont appliquées
et dont les définitions colorimétriques correspondent aux
dans les conditions prévues sur un papier de référence,
valeurs numériques indiquées dans le tableau en 4.2.
peuvent donner des résultats conformes aux spécifica-
tions de la présente Norme Internationale.
e
3.6 couleurs secondaires du premier ordre : Couleurs obte-
NOTE - La présente Norme Internationale n‘est pas applicable aux
nues par surimpression deux à deux des couleurs primaires :
encres fluorescentes. Afin de ne pas gêner les développements
ultérieurs en ce domaine, la présente Norme Internationale ne jaune et magenta,
concerne pas les pigments.
jaune et cyan,
z RÉFÉRENCES
magenta et cyan,
IS0 2834, Encres d‘imprimerie - Réalisation d‘impressions
la présente Norme Inter-
dans les conditions prévues dans
normales pour la détermination de la résistance aux agents
nationale, et dont les définitions colorimétriques corres-
physiques et chimiques.
pondent aux valeurs numériques indiquées dans le tableau
en 4.2. L’ordre selon lequel s’effectue la surimpression des
IS0 2835, Impressions et encres d‘imprimerie - Évaluation
couleurs primaires (jaune, magenta et cyan) n‘est pas, sauf
de la résistance à la lumière.
spécifications contraires, imposé, mais il doit être précisé
dans le procès-verbal d‘essai.
IS0 2837, Impressions-et encres d‘imprimerie - Évaluation
de la résistance aux solvants.
MÉTHODE D’ESSAI
I SO 2846, Gamme d‘encres primaires pour l’impression 4
offset - Caractéristiques colorimétriques.
4.1 Principe
3 DÉFINITIONS
Chaque couleur de la gamme obtenue par impression (ou
Dans le cadre de la présente Norme Internationale, les défi- surimpression) d‘encres de référence dans les conditions
nitions suivantes sont applicables :
prévues dans la présente Norme Internationale (5.2) est
1

---------------------- Page: 3 ----------------------
IS0 2845-1975 (FI
L'épaisseur du film réalisé, exprimée en micromètres est
définie, selon son apparence visuelle, par les valeurs des
égale à la quantité d'encre déposée, exprimée en grammes
caractéristiques colorimétriques établies à partir de
par mètre carré, divisée par la masse volumique de l'encre
mesurages effectués selon les méthodes spectrophoto-
utilisée, exprimée en grammes par centimètre cube.
métriques de la colorimétrie.
L'impression doit être réalisée en aplat, soit sur une presse à
Les encres de référence sont imprimées en aplat, d'une part
épreuves, soit sur un appareil approprié pour la
seules (couleurs primaires), et d'autre part en surimpression
détermination de l'aptitude à l'impression, le type
(couleurs secondaires du premier ordre) selon l'épaisseur de
d'appareil étant indiqué au procès-verbal. La quantité
référence et sur papier de référence.
d'encre déposée doit être contrôlée par pesage de la forme
NOTE - Les couleurs choisies sont celles qui offrent la meilleure
imprimante, avant et après l'impression.
résistance possible à la lumière (voir L'ISO 2835) et aux solvants
I'ISO 2837). afin que les impressions puissent être vernissables.
(voir
En pratique, on exécute, dans des conditions constantes de
température et d'hygrométrie, quelques éprouvettes dont la
charge permet d'approcher l'épaisseur de référence à
f 1 pm, et, après mesurage de l'épaisseur, on détermine, par
4.2 Caractéristiques colorirnétriques et tolérances
interpolation, la valeur exacte de la charge correspondant à
Le tableau ci-après indique les valeurs numériques de
la quantité d'encre à déposer.
grandeurs colorimétriques des couleurs primaires et
secondaires choisies.
4.4 Mesurage colorirnétrique des éprouvettes
Les composantes trichromatiques, X, Y et Z, ont été
Les impressions (ou surimpressions), complètement sèches
établies dans le système de référence colorimétrique de la
et bien fixées, doivent être soumises aux mesurages
CIE1) de 1931 et pour l'illuminant normalisé C.
spectrophotométriques, selon les recommandations de la
CIE *), après avoir été placées sur une pile d'au moins cinq
Les valeurs numériques, U', V' et W', dérivées des valeurs
feuilles, constituées par du papier de référence non
précédentes et l'écart A€, , E exprimant les tolérances de
imprimé.
teinte sont calculés selon les recommandations de la session
1964 de la CIE (Vocabulaire CIE - Définition 45-15-185). La courbe spectrophotométrique doit être établie avec un
spectrophotomètre ayant une géométrie de l'éclairage des
Les coordonnées trichromatiques x et y et la luminance Y
éprouvettes observées définie par le symbole 45/0,
ont été incluses dans le tableau ci-dessous et peuvent, si
c'est-à-dire éclairage en lumière dirigée d'incidence 45' sur
désiré, être
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.