iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST HD 369.18 S1:1999

(Main)

Audiovisual, video and television equipment and systems -- Part 18: Connectors for automatic slide projectors with built-in-triacs for audiovisual application

Audiovisual, video and television equipment and systems -- Part 18: Connectors for automatic slide projectors with built-in-triacs for audiovisual application

Applies to the interconnection and systems requirements for the control of automatic slide projectors with built-in triacs and low-voltage projector lamps supplied via insulating transformers. Ensures, for correct system function, that in particular the connection of projectors to dissolve control units meets agreed interconnection standards.

Audiovisuelle, Video- und Fernsehgeräte und -anlagen -- Teil 18: Steckverbinder für mit Triacs ausgerüstete, automatische Dia-Projektoren für audio-visuelle Anwendugen

Equipements et systèmes audiovisuels, vidéo et de télévision -- Partie 18: Connecteurs pour les projecteurs de diapositives équipés de triacs pour application audiovisuelle

S'applique aux exigences relatives à l'interconnexion et aux systèmes pour la commande des projecteurs de diapositives automatiques équipés de triacs et de lampes à basse tension alimentées par un transformateur d'isolement. Assure, pour un fonctionnement correct du système, en particulier, l'interconnexion des projecteurs et des appareils de commande de fondu, en accord avec des normes approuvées.

Audiovisual, video and television equipment and systems - Part 18: Connectors for automatic slide projectors with built-in-triacs for audiovisual application (IEC 60574-18:1987)

General Information

Status
Withdrawn
Publication Date
30-Jun-1999
Withdrawal Date
15-Aug-2023
ICS
31.220.10 - Plug-and-socket devices. Connectors
Technical Committee
AVM - Audio, video and multimedia systems and equipment
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
03-Aug-2023
Due Date
26-Aug-2023
Completion Date
16-Aug-2023
Ref Project
HD 369.18 S1:1989 - Audiovisual, video and television equipment and systems - Part 18: Connectors for automatic slide projectors with built-in-triacs for audiovisual application

Buy Standard

HD 369.18 S1:1999HD 369.18 S1:1999
PreviousNext
Standardization document
HD 369.18 S1:1999
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 369.18 S1:1999
01-julij-1999
Audiovisual, video and television equipment and systems - Part 18: Connectors
for automatic slide projectors with built-in-triacs for audiovisual application (IEC
60574-18:1987)
Audiovisual, video and television equipment and systems -- Part 18: Connectors for
automatic slide projectors with built-in-triacs for audiovisual application
Audiovisuelle, Video- und Fernsehgeräte und -anlagen -- Teil 18: Steckverbinder für mit
Triacs ausgerüstete, automatische Dia-Projektoren für audio-visuelle Anwendugen
Equipements et systèmes audiovisuels, vidéo et de télévision -- Partie 18: Connecteurs
pour les projecteurs de diapositives équipés de triacs pour application audiovisuelle
Ta slovenski standard je istoveten z: HD 369.18 S1:1989
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST HD 369.18 S1:1999 en
2003
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50049-1:1997/A1:2001(Amendment)
Domestic and similar electronic equipment interconnection requirements: Peritelevision connector
EN 50049-1:1997/A1:1998

Initially handled by TC 206 (disbanded) * D141/C101: Transferred to new TC 100X
2021: CLC legacy converted by DCLab NISOSTS

  • Amendment
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60933-4:1999(Main)
Audio, video and audiovisual systems - Interconnections and matching values -- Part 4: Connector and cordset for domestic digital bus (D2B)
EN 60933-4:1994

Deals with the application of a connector and cordset for transmitting domestic digital bus (D2B) control data signals independently from other (audio and video) signals.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50049-1:1999(Main)
Domestic and similar electronic equipment interconnection requirements: Peritelevision connector
EN 50049-1:1997

This standard defines the interconnection characteristics of peritelevision devices, both between themselves and with television receivers (monochrome or colour). The interconnections covered by this standard are at basehand (video and audio) or digital signals. For the purpose of defining conformance, this standard specifies the types and related groups of signals, composite video, audio, primary colour and control that shall be present on the connectors. The levels and impedances together with the tolerances on these values are also specified. The manner in which the signals on the connector are processed within the products incorporating the connectors and the presentation of the results of such processing to the user is outside the scope of this standard. These details depend upon the system involved, e.g. PAL or SECAM and the specification of the product. This standard lays down collectively the electrical matching characteristics (type of signals, voltage and impedance values), dimensional mechanical and electrical characteristics of the connectors, type and wiring of interconnection cordsets. Attention is drawn to the fact that the interconnection covered by this standard shall in any circumstances meet the safety requirements specified in EN 60065:1993 and the electromagnetic compatibility requirements specified in the appropriate publications

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60933-5:1999(Main)
Audio, video and audiovisual systems - Interconnections and matching values -- Part 5: Y/C connector for video systems - Electrical matching values and description of the connector
EN 60933-5:1993

Applies to the transfer of video signals between two pieces of equipment in an NTSC, PAL or SECAM high-resolution video system, in the form of a Y-signal, consisting of luminance + blanking + sync, and a C-signal, the same as the modulated chrominance signal of the composite video signal. It specifies the signal levels and impedances at the interface and the type of connector to be used.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61076-2-115:2023(Main)
Connectors for electrical and electronic equipment - Product requirements - Part 2-115: Circular connectors - Detail specification for 12-pole connectors with 2 A rated current and push-pull locking IP65/IP67 with metal housing (IEC 61076-2-115:2023)
EN IEC 61076-2-115:2023

IEC 61076-2-115:2023 describes free and fixed 12P shielded circular connectors with 2 A rated current, rated voltage up to and including 50 V AC/DC, IP65/IP67 metal housing with push-pull locking (hereinafter referred to as a connectors) for use in electrical and electronic equipment. It includes overall dimensions, interface dimensions, technical characteristics, performance requirements and test methods.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 4165-002:2023(Main)
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 002: Specification of performance and contact arrangements
EN 4165-002:2023

This document defines a number of conditions common to rectangular electrical modular connectors for receptacles, plugs and rack and panel, with interchangeable modules and continuous operating temperature 175 °C.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62847:2023(Main)
Railway applications - Rolling stock - Electrical connectors - Requirements and test methods
EN IEC 62847:2023

This International Standard retains IEC 61984:2008 as the minimum performance requirements for railway rolling stock electrical connectors.
It identifies additional terms, test methods and performance requirements for single-pole and multipole connectors with rated voltages up to 1 000 V, rated currents up to 125 A per contact and frequencies below 3 MHz used for indoor and outdoor applications in railway rolling stock.
This International Standard does not cover:
- connectors with breaking capacity (CBCs) as defined in IEC 61984:2008, 3.2, because on board rolling stock connectors are not intended to be operated (i.e. mated and unmated) under load or when live, either by means of procedures or by the presence of interlocks, as required by IEC 61991;
- non-rewirable connectors as defined in IEC 61984:2008, 3.5;
- automatic couplers, due to their additional mechanical complexity and the need for more specific requirements and testing;
- inter-vehicle jumpers, as they are connector and cable assemblies whose characteristics depend on those of both elements. Inter-vehicle connectors within the limits set in the scope of this International Standard are therefore covered by the agreed choice of suitable mechanical and environmental characteristics as defined by Annex B, and suggested by Annex C.
This International Standard identifies the application levels for electrical connectors based on
a) the severity of the service conditions in different rolling stock technologies,
b) the intended use of the rolling stock,
c) the location of the connector in the rolling stock system.
This International Standard is not applicable to internal connections of electronic devices such as connectors for printed boards and rack-and-panel connectors.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61076-3-126:2023(Main)
Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5-way power connector for industrial environments with push-pull locking (IEC 61076-3-126:2023)
EN IEC 61076-3-126:2023

IEC 61076-3-126:2023 covers 5-pole rectangular connectors for electric power supply up to 16 A per pole. These connectors consist of fixed and free connectors, both either rewirable or non-rewirable. This document employs the general function principles of the push-pull connector housing system described in IEC 61076‑3‑117 with IP65/IP67 degree of protection according to IEC 60529 for harsh applications.
Male connectors have pin contacts with square cross-section with 1 mm side. Connectors according to this document are without breaking capacity COC according to IEC 61984, therefore they are not intended to be engaged or disengaged in normal use when live or under load.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61076-2-116:2023(Main)
Connectors for electrical and electronic equipment - Product requirements - Part 2-116: Detail specification for circular connectors size 15 with up to 3+PE power contacts and auxiliary contacts, with bayonet-locking (IEC 61076-2-116:2022)
EN IEC 61076-2-116:2023

IEC 61076-2-116:2022 specifies circular connectors size 15 with bayonet-locking, with up to 3 power contacts with rated insulation voltage up to 630 V AC/DC and rated current up to 20 A, plus PE, and up to 3 auxiliary contacts with rated insulation voltage up to 63 V AC/DC and rated current up to 10 A, that are typically used for industrial power supply and power applications, such as the feeding and control of 3-phase asynchronous motors. These connectors consist of both fixed and free connectors either rewireable or non-rewireable, with bayonet-locking. Male connectors have round contacts, either power or signal, Ø1,6 mm.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 2997-002:2023(Main)
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 002: Specification of performance and contact arrangements
EN 2997-002:2022

This document defines the performance and contact arrangements of circular electrical connectors, coupled by threaded ring. It also lists the product standards and models available for selection in this series.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day