Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011/Amd 2:2012)

This International Standard prescribes safety signs for the purposes of accident prevention, fire protection, health hazard information and emergency evacuation. The shape and colour of each safety sign are according to ISO 3864-1 and the design of the graphical symbols is according to ISO 3864-3. This International Standard is applicable to all locations where safety issues related to people need to be addressed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic and, in general, to those sectors subject to a regulation which may differ with regard to certain points of this International Standard and of the ISO 3864 series. This International Standard specifies the safety sign originals that may be scaled for reproduction and application purposes.

Graphische Symbole - Sicherheitsfarben und Sicherheitszeichen - Registrierte Sicherheitszeichen (ISO 7010:2011/Amd 2:2012)

Symboles graphiques - Couleurs de sécurité et signaux de sécurité - Signaux de sécurité enregistrés (ISO 7010:2011/Amd 2:2012)

Grafični simboli - Varnostne barve in varnostni znaki - Registrirani varnostni znaki (ISO 7010:2011/Amd 2:2012)

Ta mednarodni standard določa opozorilne znake za preprečevanje nesreč, zaščito pred požari, informacije o nevarnostih za zdravje in zasilno evakuacijo. Oblika in barva posameznega varnostnega znaka sta skladni s standardom ISO 3864-1, oblika grafičnih simbolov pa s standardom ISO 3864-3. Ta mednarodni standard se uporablja za vse lokacije, za katere je treba obravnavati vprašanja varnosti, povezana z ljudmi. Vendar se ne uporablja za signaliziranje, ki se uporablja za železniški, cestni, rečni, pomorski in letalski promet ter na splošno za tiste sektorje, za katere veljajo predpisi, ki se lahko razlikujejo v nekaterih točkah tega mednarodnega standarda in serije standardov ISO 3864. Ta mednarodni standard določa izvirnik varnostnega znaka, katerega velikost se lahko spremeni za namene razmnoževanja in uporabe.

General Information

Status
Withdrawn
Public Enquiry End Date
10-Nov-2013
Publication Date
23-Feb-2014
Withdrawal Date
15-Apr-2020
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
14-Apr-2020
Due Date
07-May-2020
Completion Date
16-Apr-2020

Relations

Buy Standard

Amendment
EN ISO 7010:2012/A2:2014 - BARVE
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
EN ISO 7010:2012/kprA2:2013 - BARVE
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7010:2012/A2:2014
01-april-2014
*UDILþQLVLPEROL9DUQRVWQHEDUYHLQYDUQRVWQL]QDNL5HJLVWULUDQLYDUQRVWQL]QDNL
,62$PG
Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO
7010:2011/Amd 2:2012)
Graphische Symbole - Sicherheitsfarben und Sicherheitszeichen - Registrierte
Sicherheitszeichen (ISO 7010:2011/Amd 2:2012)
Symboles graphiques - Couleurs de sécurité et signaux de sécurité - Signaux de sécurité
enregistrés (ISO 7010:2011/Amd 2:2012)
Ta slovenski standard je istoveten z: EN ISO 7010:2012/A2:2014
ICS:
01.080.10 6LPEROL]DMDYQRREYHãþDQMH Public information symbols.
=QDNL7DEOH2]QDþEH Signs. Plates. Labels
13.200 3UHSUHþHYDQMHQHVUHþLQ Accident and disaster control
NDWDVWURI
SIST EN ISO 7010:2012/A2:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7010:2012/A2:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 7010:2012/A2:2014

EUROPEAN STANDARD
EN ISO 7010:2012/A2

NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2014
ICS 01.080.10; 01.080.20
English Version
Graphical symbols - Safety colours and safety signs - Registered
safety signs (ISO 7010:2011/Amd 2:2012)
Symboles graphiques - Couleurs de sécurité et signaux de Graphische Symbole - Sicherheitsfarben und
sécurité - Signaux de sécurité enregistrés (ISO Sicherheitszeichen - Registrierte Sicherheitszeichen (ISO
7010:2011/Amd 2:2012) 7010:2011/Amd 2:2012)
This amendment A2 modifies the European Standard EN ISO 7010:2012; it was approved by CEN on 5 January 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7010:2012/A2:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 7010:2012/A2:2014
EN ISO 7010:2012/A2:2014 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 7010:2012/A2:2014
EN ISO 7010:2012/A2:2014 (E)
Foreword
The text of ISO 7010:2011/Amd 2:2012 has been prepared by Technical Committee ISO/TC 145 “Graphical
symbols” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 7010:2012/A2:2014.
This Amendment to the European Standard EN ISO 7010:2012 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by July 2014, and
conflicting national standards shall be withdrawn at the latest by July 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 7010:2011/Amd 2:2012 has been approved by CEN as EN ISO 7010:2012/A2:2014 without
any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 7010:2012/A2:2014

---------------------- Page: 6 ----------------------

SIST EN ISO 7010:2012/A2:2014
INTERNATIONAL ISO
STANDARD 7010
Second edition
2011-06-01
AMENDMENT 2
2012-06-15
Graphical symbols — Safety colours and
safety signs — Registered safety signs
AMENDMENT 2:
Symboles graphiques — Couleurs de sécurité et signaux de sécurité —
Signaux de sécurité enregistrés
AMENDEMENT 2:
Reference number
ISO 7010:2011/Amd.2:2012(E)
©
ISO 2012

---------------------- Page: 7 ----------------------

SIST EN ISO 7010:2012/A2:2014
ISO 7010:2011/Amd.2:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 7010:2012/A2:2014
ISO 7010:2011/Amd.2:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 2 to ISO 7010:2011 was prepared by Technical Committee ISO/TC 145, Graphical symbols,
Subcommittee SC 2, Safety identification, signs, shapes, symbols and colours.
© ISO 2012 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 7010:2012/A2:2014

---------------------- Page: 10 ----------------------

SIST EN ISO 7010:2012/A2:2014
ISO 7010:2011/Amd.2:2012(E)
Graphical symbols — Safety colours and safety signs —
Registered safety signs
AMENDMENT 2:
IMPORTANT — The colours represented in the electronic file of this International Standard can be
neither viewed on screen nor printed as true representations. Although the copies of this International
Standard printed by ISO have been produced to correspond (with an acceptable tolerance as judged
by the naked eye) to the requirements of ISO 3864-4, it is not intended that these printed copies be
used for colour matching. Instead consult ISO 3864-4 which provides colorimetric and photometric
properties together with, as a guideline, references from colour order systems.
Add the following safety signs:
— E014: Child seat presence and orientation detection system (CPOD)
— E015: Drinking water
— E020: Emergency stop button
— E022: Door opens by pushing on the left-hand side
— E023: Door opens by pushing on the right-hand side
— M027: Check guard
— P035: Do not wear metal-studded footwear
— P036: No children allowed
— W032: Warning; Rapid movement of workpiece in press brake
— W036: Warning; Fragile roof
— W038: Warning; Sudden loud noise
© ISO 2012 – All rights reserved 1

---------------------- Page: 11 ----------------------

SIST EN ISO 7010:2012/A2:2014
ISO 7010:2011/Amd.2:2012(E)
Safety sign E014: Child seat presence and orientation detection system (CPOD)
Reference No.
ISO 7010-E014

Referent
Child seat presence and orientation de-
tection system (CPOD)

Function
To indicate that a CPOD-equipped child seat can
safely be used on a CPOD-equipped passenger seat
protected by a frontal airbag
Image content
Vehicle passenger seat, child in rear-facing child seat,
dot, three curved lines of increasing size radiating from
the dot, filled semi-circle
Hazard
Without a CPOD system, a fully powered vehicle airbag can injure a child in a child seat when the airbag is deployed.
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Installing a CPOD-equipped child seat on a passenger seat protected by a frontal airbag in a vehicl
...

SLOVENSKI STANDARD
SIST EN ISO 7010:2012/kprA2:2013
01-oktober-2013
*UDILþQLVLPEROL2SR]RULOQHEDUYHLQRSR]RULOQL]QDNL5HJLVWULUDQLYDUQRVWQL
]QDNL ,62$PG
Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO
7010:2011/Amd 2:2012)
Graphische Symbole - Sicherheitsfarben und Sicherheitszeichen - Registrierte
Sicherheitszeichen (ISO 7010:2011/Amd 2:2012)
Symboles graphiques - Couleurs de sécurité et signaux de sécurité - Signaux de sécurité
enregistrés (ISO 7010:2011/Amd 2:2012)
Ta slovenski standard je istoveten z: EN ISO 7010:2012/FprA2
ICS:
01.080.10 Simboli za javne informacije Public information symbols
01.080.20 *UDILþQLVLPEROL]DSRVHEQR Graphical symbols for use on
RSUHPR specific equipment
SIST EN ISO 7010:2012/kprA2:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 7010:2012/kprA2:2013

---------------------- Page: 2 ----------------------
SIST EN ISO 7010:2012/kprA2:2013


EUROPEAN STANDARD
FINAL DRAFT
EN ISO 7010:2012
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA2
July 2013
ICS 01.070; 01.080.10
English Version
Graphical symbols - Safety colours and safety signs -
Registered safety signs (ISO 7010:2011/Amd 2:2012)
Symboles graphiques - Couleurs de sécurité et signaux de Graphische Symbole - Sicherheitsfarben und
sécurité - Signaux de sécurité enregistrés (ISO Sicherheitszeichen - Registrierte Sicherheitszeichen (ISO
7010:2011/Amd 2:2012) 7010:2011/Amd 2:2012)
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/SS F16.

This draft amendment A2, if approved, will modify the European Standard EN ISO 7010:2012. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7010:2012/FprA2:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 7010:2012/kprA2:2013
EN ISO 7010:2012/FprA2:2013 (E)
Contents
Page
Foreword .3


2

---------------------- Page: 4 ----------------------
SIST EN ISO 7010:2012/kprA2:2013
EN ISO 7010:2012/FprA2:2013 (E)
Foreword
The text of ISO 7010:2011/Amd 2:2012 has been prepared by Technical Committee ISO/TC 145 “Graphical
symbols” of the International Organization for Standardization (ISO) and has been taken over as EN ISO
7010:2012/FprA2:2013.
This document is currently submitted to the Unique Acceptance Procedure.
Endorsement notice
The text of ISO 7010:2011/Amd 2:2012 has been approved by CEN as EN ISO 7010:2012/FprA2:2013
without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 7010:2012/kprA2:2013

---------------------- Page: 6 ----------------------
SIST EN ISO 7010:2012/kprA2:2013
INTERNATIONAL ISO
STANDARD 7010
Second edition
2011-06-01
AMENDMENT 2
2012-06-15
Graphical symbols — Safety colours and
safety signs — Registered safety signs
AMENDMENT 2:
Symboles graphiques — Couleurs de sécurité et signaux de sécurité —
Signaux de sécurité enregistrés
AMENDEMENT 2:
Reference number
ISO 7010:2011/Amd.2:2012(E)
©
ISO 2012

---------------------- Page: 7 ----------------------
SIST EN ISO 7010:2012/kprA2:2013
ISO 7010:2011/Amd.2:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 7010:2012/kprA2:2013
ISO 7010:2011/Amd.2:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 2 to ISO 7010:2011 was prepared by Technical Committee ISO/TC 145, Graphical symbols,
Subcommittee SC 2, Safety identification, signs, shapes, symbols and colours.
© ISO 2012 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 7010:2012/kprA2:2013

---------------------- Page: 10 ----------------------
SIST EN ISO 7010:2012/kprA2:2013
ISO 7010:2011/Amd.2:2012(E)
Graphical symbols — Safety colours and safety signs —
Registered safety signs
AMENDMENT 2:
IMPORTANT — The colours represented in the electronic file of this International Standard can be
neither viewed on screen nor printed as true representations. Although the copies of this International
Standard printed by ISO have been produced to correspond (with an acceptable tolerance as judged
by the naked eye) to the requirements of ISO 3864-4, it is not intended that these printed copies be
used for colour matching. Instead consult ISO 3864-4 which provides colorimetric and photometric
properties together with, as a guideline, references from colour order systems.
Add the following safety signs:
— E014: Child seat presence and orientation detection system (CPOD)
— E015: Drinking water
— E020: Emergency stop button
— E022: Door opens by pushing on the left-hand side
— E023: Door opens by pushing on the right-hand side
— M027: Check guard
— P035: Do not wear metal-studded footwear
— P036: No children allowed
— W032: Warning; Rapid movement of workpiece in press brake
— W036: Warning; Fragile roof
— W038: Warning; Sudden loud noise
© ISO 2012 – All rights reserved 1

---------------------- Page: 11 ----------------------
SIST EN ISO 7010:2012/kprA2:2013
ISO 7010:2011/Amd.2:2012(E)
Safety sign E014: Child seat presence and orientation detection system (CPOD)
Reference No.
ISO 7010-E014

Referent
Child seat presence and orientation de-
tection system (CPOD)

Function
To indicate that a CPOD-equipped child seat can
safely be used on a CPOD-equipped passenger seat
protected by a frontal airbag
Image content
Vehicle passenger seat, child in rear-facing child seat,
dot, three curved lines of increasing size radiating from
the dot, filled semi-circle
Hazard
Without a CPOD system, a fully powered vehicle airbag can injure a child in a child seat when the airbag is deployed.
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Installing a CPOD-equipped child seat on a passenger seat protected by a frontal airbag in a vehicle that recognizes
the CPOD child seat
Related referents

Additional information
This safety sign will be used along with a supplementary sign as part of a label for CPOD-equipped child seats or for
vehicles equipped with the CPOD sensing system. These two signs are part of ISO/TS
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.