SIST EN 13321-1:2021

SLOVENSKI STANDARD
oSIST prEN 13321-1:2020
01-maj-2020
Odprta izmenjava podatkov v avtomatizaciji stavb, regulaciji in upravljanju stavb -
Elektronski sistemi za stanovanja in stavbe - 1. del: Zahteve za proizvode in
sisteme
Open data communication in building automation, controls and building management -
Home and building electronic system - Part 1: Product and system requirements
Offene Datenkommunikation für die Gebäudeautomation und Gebäudemanagement -
Elektrische Systemtechnik für Heim und Gebäude - Teil 1: Produkt- und
Systemanforderungen
Réseau ouvert de communication de données pour l'automatisation, la régulation et la
gestion technique du bâtiment - Systèmes électroniques pour la maison et le bâtiment -
Partie 1: Spécification des produits et des systèmes
Ta slovenski standard je istoveten z: prEN 13321-1
ICS:
35.240.67 Uporabniške rešitve IT v IT applications in building
gradbeništvu and construction industry
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
oSIST prEN 13321-1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13321-1:2020

---------------------- Page: 2 ----------------------
oSIST prEN 13321-1:2020


DRAFT
EUROPEAN STANDARD
prEN 13321-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2020
ICS 35.240.67; 97.120 Will supersede EN 13321-1:2012
English Version

Open data communication in building automation, controls
and building management - Home and building electronic
system - Part 1: Product and system requirements
Réseau ouvert de communication de données pour Offene Datenkommunikation für die
l'automatisation, la régulation et la gestion technique Gebäudeautomation und Gebäudemanagement -
du bâtiment - Systèmes électroniques pour la maison Elektrische Systemtechnik für Heim und Gebäude - Teil
et le bâtiment - Partie 1: Spécification des produits et 1: Produkt- und Systemanforderungen
des systèmes
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical
Committee CEN/TC 247.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13321-1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13321-1:2020
prEN 13321-1:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 6

2

---------------------- Page: 4 ----------------------
oSIST prEN 13321-1:2020
prEN 13321-1:2020 (E)
European foreword
This document (prEN 13321-1:2020) has been prepared by Technical Committee CEN/TC 247 “Building
automation, controls and building management”, the secretariat of which is held by SNV.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13321-1:2012.
Compared to the previous version (EN 13321-1:2012), the following changes have been made:
a) Clause 2 “Normative references” has been edited;
b) references to the EN 50090 series have been updated;
c) the new EN 50491 series has been added to the references;
d) the withdrawn EN 50090-2-2 standard has been deleted;
e) all previous Annexes have been deleted.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
3

---------------------- Page: 5 ----------------------
oSIST prEN 13321-1:2020
prEN 13321-1:2020 (E)
Introduction
The permanent objective of CENELEC/TC 205 is to prepare standards for all aspects of Home and
Building Electronic Systems (HBES) in relation to the Information Society. Such HBES standards ensure
the integration of a wide spectrum of control applications and the control and management aspects of
other applications in and around homes and buildings, including the gateways to different transmission
media and public networks. Moreover, they take all matters of EMC and electrical and functional safety
into account. Hence, they are the pre-condition that conforming products interwork and are installer
friendly to facilitate the system designers’ and installers’ task of providing the necessary networks
according to their costumers service needs.
Extending these standardized Home and Building Electronic Systems (HBES) requirements to Building
Automation and Control System Application and Building Manage
...