Tanks for transport of dangerous goods - Service equipment for tanks - Gravity discharge coupler

This European Standard covers the gravity discharge coupler and specifies the performance requirements, critical dimensions and tests necessary to verify the compliance of the equipment to this standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 (flammable liquids) of the European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR) which have a vapour pressure at 50°C not greater than 110kPa.

Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Entladekupplung für Schwerkraftabgabe

In dieser Europäischen Norm werden Entladekupplungen für Schwerkraftabgabe behandelt und Leistungsanforderungen, entscheidende Maße und Prüfungen festgelegt, die erforderlich sind um nachzuweisen, daß die Kupplungen dieser Norm entsprechen. Die in dieser Norm beschriebene Ausrüstung ist zum Umfüllen flüssiger Erdölerzeugnisse und anderer gefährlicher Güter der Klasse 3 (feuergefährliche Güter) geeignet, deren Dampfdruck bei 50°C maximal 110kPa beträgt und für deren Transport auf der Straße die ADR (European Agreement concerning the International Carriage of Dangerous Goods by Road) gilt.

Citernes de transport de matieres dangereuses - Equipements de service pour citernes - Coupleur de vidange gravitaire

La présente Norme européenne s'applique aux coupleurs de vidange gravitaire et spécifie les exigences de fonctionnement, les dimensions critiques et les essais nécessaires pour vérifier la conformité du dispositif a la présente norme.
Les équipements spécifiés par la présente norme conviennent a une utilisation avec des produits pétroliers liquides et autres matieres dangereuses de la classe 3 de l'ADR - Accord européen relatif au transport international des marchandises dangereuses par route) - (liquides inflammables) dont la pression de vapeur ne dépasse pas 110 kPa a 50 °C (y compris l'essence) et qui n'entrent pas dans la sous-classification des produits toxiques ou corrosifs.

Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Spojka za težnostno praznjenje

General Information

Status
Published
Publication Date
31-Oct-2002
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Nov-2002
Due Date
01-Nov-2002
Completion Date
01-Nov-2002

Buy Standard

Standard
EN 13315:2002
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Spojka za težnostno praznjenjeTanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Entladekupplung für SchwerkraftabgabeCiternes de transport de matieres dangereuses - Equipements de service pour citernes - Coupleur de vidange gravitaireTanks for transport of dangerous goods - Service equipment for tanks - Gravity discharge coupler23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 13315:2002SIST EN 13315:2002en01-november-2002SIST EN 13315:2002SLOVENSKI
STANDARD



SIST EN 13315:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13315May 2002ICS 13.300; 23.020.20English versionTanks for transport of dangerous goods - Service equipment fortanks - Gravity discharge couplerCiternes de transport de matières dangereuses -Equipements de service pour citernes - Coupleur devidange gravitaireTanks für die Beförderung gefährlicher Güter -Bedienungsausrüstung von Tanks - Entladekupplung fürSchwerkraftabgabeThis European Standard was approved by CEN on 4 January 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13315:2002 ESIST EN 13315:2002



EN 13315:2002 (E)2ContentspageForeword.3Introduction.41Scope.52Normative references.53Terms and definitions.54Function.65Design characteristics.65.1General.65.2Pressure rating.65.3Materials of construction.65.4Temperature range.65.5Dimensional characteristics.65.6Electrical resistance.66Optional features.76.1Visual and flow controls.76.2Adaptor actuation.76.3Interlock operation.77Tests.77.1General.77.2Production tests.77.2.1General.77.2.2Shell tightness test.77.2.3Operability test.77.2.4Test results.77.3Type tests.87.3.1General.87.3.2Shell tightness test.87.3.3Operability test.87.3.4Test results.88Marking.89Installation, operating and maintenance recommendations.8SIST EN 13315:2002



EN 13315:2002 (E)3ForewordThis document EN 13315:2002 has been prepared by Technical Committee CEN/TC 296 "Tanks for transport ofdangerous goods", the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latestby November 2002.This European Standard forms part of a coherent standards programme comprising the following standards:Tanks for transport of liquid dangerous goods with vapour pressure not exceeding 110 kPa (absolutepressure) at 50 °C and petrol - Service EquipmentEN 13081, Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptorand coupler.EN 13082, Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve.EN 13083, Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loadingand unloading.prEN 13308, Tanks for transport of dangerous goods – Service equipment for tanks - Non-pressure balancedfootvalve.prEN 13314, Tanks for transporting dangerous goods - Service equipment - Fill hole cover.EN 13315, Tanks for transpo
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.