SIST EN 61747-3-1:2008

SLOVENSKI STANDARD
SIST EN 61747-3-1:2008
01-februar-2008
1DGRPHãþD
SIST EN 61747-3-1:2002
(OHPHQWLSULND]RYDOQLNRYVWHNRþLPLNULVWDOLGHO&HOLFHSULND]RYDOQLNDV
WHNRþLPLNULVWDOL/&'2NYLUQDSRGUREQDVSHFLILNDFLMD,(&
Liquid crystal display devices - Part 3-1: Liquid crystal display (LCD) cells - Blank detail
specification (IEC 61747-3-1:2006)
Flüssigkristall-Anzeige-Bauelemente - Teil 3-1: Flüssigkristall-Anzeigezellen (LCD-
Zellen) - Vordruck für Bauartspezifikation (IEC 61747-3-1:2006)
Dispositifs d'affichage a cristaux liquides - Partie 3-1: Cellules d'affichage a cristaux
liquides (LCD) - Spécification particuliere cadre (IEC 61747-3-1:2006)
Ta slovenski standard je istoveten z: EN 61747-3-1:2006
ICS:
31.120
SIST EN 61747-3-1:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61747-3-1

NORME EUROPÉENNE
November 2006
EUROPÄISCHE NORM

ICS 31.120 Supersedes EN 61747-3-1:1999


English version


Liquid crystal display devices
Part 3-1: Liquid crystal display (LCD) cells -
Blank detail specification
(IEC 61747-3-1:2006)


Dispositifs d'affichage à cristaux liquides Flüssigkristall-Anzeige-Bauelemente
Partie 3-1: Cellules d'affichage à cristaux Teil 3-1: Flüssigkristall-Anzeigezellen
liquides (LCD) - (LCD-Zellen) -
Spécification particulière cadre Vordruck für Bauartspezifikation
(CEI 61747-3-1:2006) (IEC 61747-3-1:2006)




This European Standard was approved by CENELEC on 2006-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61747-3-1:2006 E

---------------------- Page: 2 ----------------------

EN 61747-3-1:2006 - 2 -
Foreword
The text of document 110/88/FDIS, future edition 2 of IEC 61747-3-1, prepared by IEC TC 110, Flat panel
display devices was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61747-3-1 on 2006-10-01.
This European Standard supersedes EN 61747-3-1:1999.
The main changes with regard to EN 61747-3-1:1999 concern editorial updating in accordance with
current ISO/IEC directives.
This part of EN 61747 is a blank detail specification for liquid crystal display cells. It should be read
together with the generic specification and sectional specification to which it refers.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61747-3-1:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

NORME CEI
INTERNATIONALE
IEC



61747-3-1
INTERNATIONAL

QC 720201

STANDARD

Deuxième édition

Second edition

2006-09

Dispositifs d’affichage à cristaux liquides –
Partie 3-1:
Cellules d’affichage à cristaux liquides (LCD) –
Spécification particulière cadre

Liquid crystal display devices –
Part 3-1:
Liquid crystal display (LCD) cells –
Blank detail specification
 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
K
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 4 ----------------------

61747-3-1  IEC:2006 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
_________

LIQUID CRYSTAL DISPLAY DEVICES –

Part 3-1: Liquid crystal display (LCD) cells –
Blank detail specification


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61747-3-1 has been prepared by IEC technical committee 110: Flat
panel display devices.
This second edition cancels and replaces the first edition, published in 1998, and constitutes a
technical revision.
The main change with regard to the previous edition is as follows:
– the new edition was editorially changed in accordance with current ISO/IEC directives.

---------------------- Page: 5 ----------------------

61747-3-1  IEC:2006 – 5 –
The text of this standard is based on the following documents:
FDIS Report on voting
110/88/FDIS 110/94/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The QC number that appears on the front cover of this publication is the specification number
in the IECQ Quality Assessment System for Electronic Components (IECQ).
Future standards in this series will carry the new general title as cited above. Titles of existing
standards in this series will be updated at the time of the next edition.
A list of all parts of the IEC 61747 series, under the general title Liquid crystal display devices ,
can be found on the IEC website.

The committee has decided that the contents of this publication will remain unchanged until the
maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 6 ----------------------

61747-3-1  IEC:2006 – 7 –
LIQUID CRYSTAL DISPLAY DEVICES –

Part 3-1: Liquid crystal display (LCD) cells –
Blank detail specification


INTRODUCTION
The IEC quality assessment system for electronic components is operated in accordance with
the statutes of the IEC and under the authority of the IEC. The object of this system is to define
assessment procedures in such a manner that electronic components released by one
participating country as conforming with the requirements of an applicable specification are
equally acceptable in all participating countries without the need for further testing.
This blank detail specification is one of a series of blank detail specifica
...