Liquid crystal display devices -- Part 3: Liquid crystal display (LCD) cells - Sectional specification

This sectional specification applies to liquid crystal cells of the segment type monochrome. It gives details of the quality assessment procedures, the inspection requirements, screening sequences, sampling requirements and test and measurement procedures required for the assessment of liquid crystal display cells. Instead of the qualification approval procedure, the capability approval procedure can be applied (see Clause 4 of IECQ 001002-3; however, at present the capability approval procedure for liquid crystal display cells is under consideration) for all products manufactured in a defined process. All the requirements of this specification remain valid, unless modified by the requirements set out in 4.7 of this standard.

Flüssigkristall-Anzeige-Bauelemente -- Teil 3: Flüssigkristall-Anzeigezellen (LCD-Zellen) - Rahmenspezifikation

Dispositifs d'affichage à cristaux liquides -- Partie 3: Cellules d'affichage à cristaux liquides (LCD) - Spécification intermédiaire

Cette spécification intermédiaire s applique aux cellules à cristaux liquides de type monochrome à segment. Elle donne des précisions concernant les procédures d assurance de la qualité, les exigences de contrôle, les séquences de sélection, les exigences d échantillonnage et les procédures d essai et de mesure exigées pour l évaluation des cellules d affichage à cristaux liquides

Elementi iz tekočih kristalov - 3. del: Celice prikazovalnika iz tekočih kristalov (LCD) - Področna specifikacija (IEC 61747-3:2006)

General Information

Status
Published
Publication Date
31-Dec-2006
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jan-2007
Due Date
01-Jan-2007
Completion Date
01-Jan-2007

Relations

Buy Standard

Standard
EN 61747-3:2007
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

6/29(16., 6,67(1

67$1'$5'
MDQXDU
(OHPHQWLL]WHNRþLKNULVWDORYGHO&HOLFHSULND]RYDOQLNDL]WHNRþLKNULVWDORY
/&' 3RGURþQDVSHFLILNDFLMD ,(&
LVWRYHWHQ(1
/LTXLGFU\VWDOGLVSOD\GHYLFHV3DUW/LTXLGFU\VWDOGLVSOD\ /&' FHOOV6HFWLRQDO
VSHFLILFDWLRQ ,(&
,&6 5HIHUHQþQDãWHYLOND

6,67(1 HQ
!"#$%&’( )&!*+,%- .

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61747-3

NORME EUROPÉENNE
September 2006
EUROPÄISCHE NORM

ICS 31.120 Supersedes EN 61747-3:1999


English version


Liquid crystal display devices
Part 3: Liquid crystal display (LCD) cells -
Sectional specification
(IEC 61747-3:2006)


Dispositifs d'affichage à cristaux liquides Flüssigkristall-Anzeige-Bauelemente
Partie 3: Cellules d'affichage Teil 3: Flüssigkristall-Anzeigezellen
à cristaux liquides (LCD) - (LCD-Zellen) -
Spécification intermédiaire Rahmenspezifikation
(CEI 61747-3:2006) (IEC 61747-3:2006)




This European Standard was approved by CENELEC on 2006-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61747-3:2006 E

---------------------- Page: 2 ----------------------

EN 61747-3:2006 - 2 -
Foreword
The text of document 110/82/FDIS, future edition 2 of IEC 61747-3, prepared by IEC TC 110, Flat panel
display devices was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61747-3 on 2006-09-01.
This European Standard supersedes EN 61747-3:1999.
The main changes with regard to EN 61747-3:1999 concern editorial updating in accordance with current
ISO/IEC directives.
This part of EN 61747 is a sectional specification for liquid crystal display cells. It should be read together
with the generic specification to which it refers.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61747-3:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61747-3:2006

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 61747-1 - Liquid crystal and solid-state display devices EN 61747-1 1999
Part 1: Generic specification


1) 2)
IEC 61747-5 - Liquid crystal and solid-state display devices EN 61747-5 1998
Part 5: Environmental, endurance and
mechanical test methods


1) 2)
IEC 61747-6 - Liquid crystal and solid-state display devices EN 61747-6 2004
Part 6: Measuring methods for liquid crystal
modules - Transmissive type


IEC QC 001002-3 2005 IEC Quality Assessment System for - -
Electronic Components (IECQ) - Rules of
Procedure
Part 3: Approval procedures




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE
IEC



61747-3
INTERNATIONAL


QC 720200
STANDARD


Deuxième édition
Second edition

2006-08

Dispositifs d’affichage à cristaux liquides –
Partie 3:
Cellules d’affichage à cristaux liquides
(LCD) – Spécification intermédiaire

Liquid crystal display devices –
Part 3:
Liquid crystal display (LCD) cells –
Sectional specification
© IEC 2006 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
N
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

61747-3  IEC:2006 – 3 –
CONTENTS
FOREWORD.5

1 Scope.9
2 Normative references .9
3 Terms and definitions .9
4 Quality assessment procedure.11
4.1 Primary stage of manufacture.11
4.2 Production process.11
4.3 Subcontracting .13
4.4 Structural similarity procedures .13
4.5 Qualification approval procedure .17
4.6 Quality conformance test.17
4.7 Capability approval procedure .19
4.8 Screening.19
4.9 Delayed deliveries.19
5 Test and measurement procedures.19

Table 1 – Test dependent criteria for structural similarity .21
Table 2 – Qualification approval tests .23
Table 3 – Groups and categories of assessed quality .25
Table 4 – Group A – Lot-by-lot tests .25
Table 5 – Group B – Lot-by-lot tests .25
Table 6 – Group C: Periodic tests .27
Table 7 – Sampling requirements for group A tests .29
Table 8 – Sampling requirements for group B and C tests.29
Table 9 – Screening test item and conditions .29

---------------------- Page: 6 ----------------------

61747-3  IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________

LIQUID CRYSTAL DISPLAY DEVICES –

Part 3: Liquid crystal display (LCD) cells –
Sectional specification


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61747-3 has been prepared by IEC technical committee 110: Flat
panel display devices.
This second edition cancels and replaces the first edition, published in 1998, and constitutes
a technical revision.
The main changes with regard to the previous edition concern editorial updating in
accordance with current ISO/IEC directives.
This part of IEC 61747 is a sectional specification for liquid crystal display cells. It should be
read together with the generic specification to which it refers.

---------------------- Page: 7 ----------------------

61747-3  IEC:2006 – 7 –
The text of this standard is based on the following documents:
FDIS Report on voting
110/82/FDIS 110/89/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The QC number that appears on the front cover of this publication is the specification number
in the IECQ Quality Assessment System for Electronic Components (IECQ).
Future standards in this series will carry the new general title as cited above. Titles of existing
standards in this series will be updated at the time of the next edition.
IEC 61747 consists of the following parts, under the general title Liquid crystal display devices:
Part 1: Generic specification;
Part 2: Liquid crystal display modules – Sectional specification
Part 2-1: Passive matrix monochrome LCD modules – Blank detail specification
Part 2-2: Matrix colour LCD modules – Blank detail specification
Part 3: Liquid crystal display (LCD) cells – Sectional specification
Part 3-1: Liquid crystal display (LCD) cells – Blank detail specification
Part 4: Liquid crystal display modules and cells – Essential ratings and characteristics
Part 4-1: Matrix colour LCD modules – Essential ratings and characteristics
Part 5: Environmental, endurance and mechanical test methods
Part 6: Measuring methods for liquid crystal modules – Transmissive type
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.

---------------------- Page: 8 ----------------------

61747-3  IEC:2006 – 9 –
LIQUID CRYSTAL DISPLAY DEVICES –

Part 3: Liquid crystal display (LCD) cells –
Sectional specification



1 Scope
This sectional specification applies to liquid crystal cells of the segment type monochrome . It
gives details of the quality assessment procedures, the inspection requirements, screening
sequences, sampling requirements and test and measurement procedures required for the
assessment of liquid crystal display cells.
Instead of the qualification approval procedure, the capability approval procedure can be
applied (see Clause 4 of IECQ 001002-3; however, at present the capability approval
procedure for liquid crystal display cells is under consideration) for all products manufactured
in a defined process.
All the requirements of this specification remain valid, unless modified by the requirements
set out in 4.7 of this standard.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
IEC 61747-1, Liquid crystal and solid-state display devices – Part 1: Generic specification
IEC 61747-5, Liquid crystal and solid-state display devices – Part 5: Environmental,
endurance and mechanical test methods
IEC 61747-6, Liquid crystal and solid-state display devices – Part 6: Measuring methods for
liquid crystal modules – Transmissive type
IECQ 001002-3:2005, IEC Quality Assessment System for Electronic Components (IECQ) –
Rules of Procedure – Part 3: Approval procedures
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
production line
an arrangement of process operations in production permitting sequential occurrence at
various stages of production
EXAMPLES of processes:
a) electrode patterning process;
b) alignment treatment process;
c) assembly process;

---------------------- Page: 9 ----------------------

61747-3  IEC:2006 – 11 –
d) liquid crystal material filling process;
e) finishing process;
f) inspection process.
NOTE Quality assessment procedures are not included in these phases.
3.2
production lot
devices of the same type, manufactured in the same production lines and passing through the
same nominated process, normally within one month
3.3
major changes
any change in the manufacturing process or technology which could affect the quality or
performance of a product supplied to an approved specification, or which could require a
product to be transferred from one similarity group to another group (see 4.4.2 below)
EXAMPLES
a) electrode patterning: complete different pattern;
b) material of substrate: thickness of glass substrate;
c) type of LC material: type of electro-optical effect, e.g. TN, STN, etc.;
d) pin assignment change.
NOTE 1 Not considered as a major change: equipment change without
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.