SIST EN 61850-10:2013

SLOVENSKI STANDARD
SIST EN 61850-10:2013
01-september-2013
1DGRPHãþD
SIST EN 61850-10:2005
.RPXQLNDFLMVNDRPUHåMDLQVLVWHPL]DDYWRPDWL]DFLMRSRUDEHHOHNWULþQHHQHUJLMH
GHO3UHVNXãDQMHVNODGQRVWL,(&
Communication networks and systems for power utility automation - Part 10:
Conformance testing
/
Réseaux et systèmes de communication pour l'automation des systèmes électriques -
Partie 10: Essais de conformité
Ta slovenski standard je istoveten z: EN 61850-10:2013
ICS:
29.240.30 Krmilna oprema za Control equipment for electric
elektroenergetske sisteme power systems
33.200 Daljinsko krmiljenje, daljinske Telecontrol. Telemetering
meritve (telemetrija)
SIST EN 61850-10:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61850-10:2013

---------------------- Page: 2 ----------------------

SIST EN 61850-10:2013

EUROPEAN STANDARD
EN 61850-10

NORME EUROPÉENNE
July 2013
EUROPÄISCHE NORM

ICS 33.200 Supersedes EN 61850-10:2005


English version


Communication networks and systems for power utility automation -
Part 10: Conformance testing
(IEC 61850-10:2012)


Réseaux et systèmes de communication Kommunikationsnetze und -systeme in
pour l'automatisation des systèmes Stationen -
électriques - Teil 10: Konformitätsprüfung
Partie 10: Essais de conformité (IEC 61850-10:2012)
(CEI 61850-10:2012)





This European Standard was approved by CENELEC on 2013-01-18. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61850-10:2013 E

---------------------- Page: 3 ----------------------

SIST EN 61850-10:2013
EN 61850-10:2013 - 2 -

Foreword
The text of document 57/1284/FDIS, future edition 2 of IEC 61850-10, prepared by IEC TC 57 "Power
systems management and associated information exchange" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 61850-10:2013.

The following dates are fixed:
• latest date by which the document has (dop) 2014-01-05
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-01-18
• latest date by which the national
standards conflicting with the

document have to be withdrawn

This document supersedes EN 61850-10:2005.
EN 61850-10:2013 includes the following significant technical changes with respect to EN 61850-10:2005:
– server device conformance test procedures have been updated;
– client device conformance test procedures have been added;
– sampled values device conformance test procedures have been added;
– (engineering) tool related conformance test procedures have been added;
– GOOSE performance test procedures have been added.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 61850-10:2013 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 61850-10:2013
- 3 - EN 61850-10:2013
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC/TS 61850-2 - Communication networks and systems in - -
substations -
Part 2: Glossary


IEC 61850-3 - Communication networks and systems for EN 61850-3 -
power utility automation -
Part 3: General requirements


IEC 61850-4 2011 Communication networks and systems for EN 61850-4 2011
power utility automation -
Part 4: System and project management


1)
IEC 61850-5 2003 Communication networks and systems in EN 61850-5 2003
substations -
Part 5: Communication requirements for
functions and device models


IEC 61850-6 2009 Communication networks and systems for EN 61850-6 2010
power utility automation -
Part 6: Configuration description language for
communication in electrical substations
related to IEDs


IEC 61850-7-1 2011 Communication networks and systems for EN 61850-7-1 2011
power utility automation -
Part 7-1: Basic communication structure -
Principles and models


IEC 61850-7-2 2010 Communication networks and systems for EN 61850-7-2 2010
power utility automation -
Part 7-2: Basic information and
communication structure - Abstract
communication service interface (ACSI)


IEC 61850-7-3 2010 Communication networks and systems for EN 61850-7-3 2011
power utility automation -
Part 7-3: Basic communication structure -
Common data classes


IEC 61850-7-4 2010 Communication networks and systems for EN 61850-7-4 2010
power utility automation -
Part 7-4: Basic communication structure -
Compatible logical node classes and data
object classes



1)
EN 61850-5 is superseded by EN 61850-5:2013, which is based on IEC 61850-5:2013.

---------------------- Page: 5 ----------------------

SIST EN 61850-10:2013
EN 61850-10:2013 - 4 -
Publication Year Title EN/HD Year
IEC 61850-8-1 2011 Communication networks and systems for EN 61850-8-1 2011
power utility automation -
Part 8-1: Specific Communication Service
Mapping (SCSM) - Mappings to MMS (ISO
9506-1 and ISO 9506-2) and to ISO/IEC
8802-3


IEC 61850-9-2 2011 Communication networks and systems for EN 61850-9-2 2011
power utility automation -
Part 9-2: Specific Communication Service
Mapping (SCSM) - Sampled values over
ISO/IEC 8802-3


IEC 62439-3 2012 Industrial communication networks - High EN 62439-3 2012
availability automation networks -
Part 3: Parallel Redundancy Protocol (PRP)
and High availability Seamless Redundancy
(HSR)


ISO 9001 - Quality management systems - EN ISO 9001 -
Requirements


ISO 9506 Series Industrial automation systems - - -
Manufacturing Message Specification


ISO/IEC 9646 Series Information technology - Open Systems EN ISO/IEC 9646 -
Interconnection - Conformance testing
methodology and framework


IEEE 1588 2008 IEEE Standard for a Precision Clock - -
Synchronization Protocol for Networked
Measurement and Control Systems

---------------------- Page: 6 ----------------------

SIST EN 61850-10:2013




IEC 61850-10

®


Edition 2.0 2012-12




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE
colour

inside










Communication networks and systems for power utility automation –

Part 10: Conformance testing




Réseaux et systèmes de communication pour l'automatisation des systèmes

électriques –

Partie 10: Essais de conformité















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX XC


ICS 33.200 ISBN 978-2-83220-557-0



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 61850-10:2013
– 2 – 61850-10 © IEC:2012
CONTENTS
FOREWORD . 6
INTRODUCTION . 8
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 10
4 Abbreviated terms . 12
5 Introduction to conformance testing . 13
5.1 General . 13
5.2 Conformance test procedures . 14
5.3 Quality assurance and testing . 14
5.3.1 General . 14
5.3.2 Quality plan . 15
5.4 Testing . 16
5.4.1 General . 16
5.4.2 Use of SCL files. 17
5.4.3 Device testing . 17
5.5 Documentation of conformance test report . 18
6 Device related conformance testing . 19
6.1 Test methodology . 19
6.2 Conformance test procedures . 19
6.2.1 General . 19
6.2.2 Test procedure requirements . 19
6.2.3 Test structure . 20
6.2.4 Test cases to test a server device . 20
6.2.5 Test cases to test a client device . 44
6.2.6 Test cases to test sampled values device . 60
6.2.7 Acceptance criteria . 65
7 Tool related conformance testing . 65
7.1 General guidelines . 65
7.1.1 Test methodology . 65
7.1.2 Test system architecture . 66
7.2 Conformance test procedures . 66
7.2.1 General . 66
7.2.2 Test procedure requirements . 66
7.2.3 Test structure . 66
7.2.4 Test cases to test an IED configurator tool . 66
7.2.5 Test cases to test a system configurator tool . 68
7.2.6 Acceptance criteria . 73
8 Performance tests . 73
8.1 General . 73
8.2 Communications latency . 74
8.2.1 Application domain . 74
8.2.2 Methodology . 74
8.2.3 GOOSE performance test . 75
8.3 Time synchronisation and accuracy . 79

---------------------- Page: 8 ----------------------

SIST EN 61850-10:2013
61850-10 © IEC:2012 – 3 –
8.3.1 Application domain . 79
8.3.2 Methodology . 79
8.3.3 Testing criteria . 80
8.3.4 Performance . 81
9 Additional tests . 81
Annex A (informative) Examples of test procedure template . 82
Bibliography . 83

Figure 1 – Conceptual conformance assessment process . 17
Figure 2 – Test procedure format . 20
Figure 3 – Test system architecture to test a server device . 21
Figure 4 – Test system architecture to test a client device . 44
Figure 5 – Test system architecture to test a sampled values publishing device . 60
Figure 6 – Test system architecture to test a sampled values subscribing device . 61
Figure 7 – Test system architecture to test a configurator tool . 66
Figure 8 – Performance testing (black box principle) . 75
Figure 9 – Measure round trip time using GOOSE ping-pong method . 76
Figure 10 – Time synchronisation and accuracy test setup. 80

Table 1 – Server documentation test cases . 21
Table 2 – Server configuration test cases . 22
Table 3 – Server data model test cases . 22
Table 4 – Association positive test cases . 23
Table 5 – Association negative test cases . 24
Table 6 – Server positive test cases . 24
Table 7 – Server negative test cases . 25
Table 8 – Data set positive test cases . 26
Table 9 – Date set negative test cases . 27
Table 10 – Service tracking test cases . 28
Table 11 – Substitution positive test cases . 28
Table 12 – Setting group positive test cases . 29
Table 13 – Setting group negative test cases . 29
Table 14 – Unbuffered reporting positive test cases . 30
Table 15 – Unbuffered reporting negative test cases . 31
Table 16 – Buffered reporting positive test cases . 32
Table 17 – Buffered reporting negative test cases. 34
Table 18 – Log positive test cases . 35
Table 19 – Log negative test cases . 35
Table 20 – GOOSE publish positive test cases . 36
Table 21 – GOOSE subscribe positive test cases . 37
Table 22 – GOOSE management positive test cases . 37
Table 23 – GOOSE publish negative test cases . 37
Table 24 – GOOSE subscribe negative test cases . 38
Table 25 – GOOSE management negative test cases . 38

---------------------- Page: 9 ----------------------

SIST EN 61850-10:2013
– 4 – 61850-10 © IEC:2012
Table 26 – Control test cases . 38
Table 27 – SBOes test cases . 40
Table 28 – DOns test cases . 41
Table 29 – SBOns test cases . 41
Table 30 – DOes test cases . 42
Table 31 – Time positive test cases . 42
Table 32 – Time negative test cases . 43
Table 33 – File transfer positive test cases . 43
Table 34 – File transfer negative test cases . 43
Table 35 – Network redundancy test cases . 44
Table 36 – Client documentation test cases . 45
Table 37 – Client configuration test cases . 45
Table 38 – Client data model test cases. 45
Table 39 – Association positive test cases . 46
Table 40 – Association negative test cases . 47
Table 41 – Server positive test cases. 47
Table 42 – Server negative test cases . 48
Table 43 – Data set positive test cases . 48
Table 44 – Data set negative test cases. 49
Table 45 – Service tracking test cases . 50
Table 46 – Substitution test cases . 50
Table 47 – Setting group positive test cases . 51
Table 48 – Setting group negative test cases . 51
Table 49 – Unbuffered reporting positive test cases . 52
Table 50 – Unbuffered reporting negative test cases . 53
Table 51 – Buffered reporting positive test cases . 53
Table 52 – Buffered reporting negative test cases. 55
Table 53 – Log positive test cases . 55
Table 54 – Log negative test cases . 56
Table 55 – GOOSE control block test cases . 56
Table 56 – Control general test cases . 56
Table 57 – SBOes test cases . 57
Table 58 – DOns test cases . 57
Table 59 – SBOns test cases . 58
Table 60 – DOes test cases . 58
Table 61 – Time positive test cases . 59
Table 62 – Time negative test cases . 59
Table 63 – File transfer positive test cases . 59
Table 64 – File transfer negative test cases . 59
Table 65 – Sampled values documentation test cases . 61
Table 66 – Sampled values configuration test cases . 62
Table 67 – Sampled values datamodel test cases . 62
Table 68 – Sampled value control block test cases . 63

---------------------- Page: 10 ----------------------

SIST EN 61850-10:2013
61850-10 © IEC:2012 – 5 –
Table 69 – Send SV message publish test cases . 64
Table 70 – Send SV message subscribe positive test cases . 64
Table 71 – Send SV message subscribe negative test cases . 65
Table 72 – ICD test cases . 67
Table 73 – ICD export test cases . 67
Table 74 – SCD Import test cases . 67
Table 75 – IED configurator data model test cases . 68
Table 76 – IID export test cases . 68
Table 77 – Negative IID export test case . 68
Table 78 – System configurator documentation test case . 68
Table 79 – ICD / IID import test cases. 69
Table 80 – ICD / IID negative test case . 69
Table 81 – Communication engineering test cases. 70
Table 82 – Communication engineering negative test case . 70
Table 83 – Data flow test cases . 70
Table 84 – Data flow negative test cases . 70
Table 85 – Substation section handling test cases . 71
Table 86 – SCD modification test cases . 71
Table 87 – SCD export test cases . 72
Table 88 – SCD import test cases . 72
Table 89 – SED file handling test cases . 73
Table 90 – GOOSE performance test cases . 78

---------------------- Page: 11 ----------------------

SIST EN 61850-10:2013
– 6 – 61850-10 © IEC:2012
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

COMMUNICATION NETWORKS AND SYSTEMS
FOR POWER UTILITY AUTOMATION –

Part 10: Conformance testing


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way i
...