SIST-TP ETSI/ETR 202 E1:2005
(Main)Public Switched Telephone Network (PSTN); Real time clock [CEPT Recommendation T/CS 20-18 E (1981)]
Public Switched Telephone Network (PSTN); Real time clock [CEPT Recommendation T/CS 20-18 E (1981)]
Endorsement of CEPT T/CS 20-18
Javno komutirano telefonsko omrežje (PSTN) – Ura realnega časa [priporočilo CEPT T/CS 20-18 E (1981)]
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP ETSI/ETR 202 E1:2005
01-januar-2005
-DYQRNRPXWLUDQRWHOHIRQVNRRPUHåMH 3671 ±8UDUHDOQHJDþDVD>SULSRURþLOR
&(377&6( @
Public Switched Telephone Network (PSTN); Real time clock [CEPT Recommendation
T/CS 20-18 E (1981)]
Ta slovenski standard je istoveten z: ETR 202 Edition 1
ICS:
33.040.35 Telefonska omrežja Telephone networks
SIST-TP ETSI/ETR 202 E1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP ETSI/ETR 202 E1:2005
---------------------- Page: 2 ----------------------
SIST-TP ETSI/ETR 202 E1:2005
ETSI ETR 202
TECHNICAL September 1995
REPORT
Source: ETSI TC-SPS Reference: DTR/SPS-00001-3
ICS: 33.020
PSTN, DTMF
Key words:
Public Switched Telephone Network (PSTN);
Real time clock
[CEPT Recommendation T/CS 20-18 E (1981)]
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
F-06921 Sophia Antipolis CEDEX - FRANCE
Postal address:
650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Office address:
c=fr, a=atlas, p=etsi, s=secretariat - secretariat@etsi.fr
X.400: Internet:
Tel.: +33 92 94 42 00 - Fax: +33 93 65 47 16
*
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1995. All rights reserved.
---------------------- Page: 3 ----------------------
SIST-TP ETSI/ETR 202 E1:2005
Page 2
ETR 202: September 1995
Foreword
This ETSI Technical Report (ETR) has been produced by the Signalling Protocols and Switching (SPS)
Technical Committee of the European Telecommunications Standards Institute (ETSI).
ETRs are inf
...
This May Also Interest You
The present document defines a dictionary of parameters that are commonly used in multiple TC LI specifications.
Aside from defining a dictionary, the present document aims to provide technical means for other specifications to use.
It is encouraged to use the present document in the development of new specifications.
It is foreseen that regular maintenance of the present document is required. As such, release management requirements
will be defined.
Before accepting any new common parameter, the present document will provide a set of requirements the parameter
has to comply to in order to become a common parameter.
- Standard34 pagesEnglish languagesale 15% off
- Technical specification34 pagesEnglish languagesale 10% offe-Library read for×1 day
The quality of background noise transmission is an important factor, which significantly contributes to the perceived
overall quality of speech. Existing and even more the new generation of terminals, networks and system configurations
including broadband services can be greatly improved with a proper design of terminals and systems in the presence of
background noise. The present document:
• describes a noise simulation environment using realistic background noise scenarios for laboratory use;
• contains a database including the relevant background noise samples for subjective and objective evaluation.
The present document provides information about the recording techniques needed for background noise recordings and
discusses the advantages and drawbacks of existing methods. The present document describes the requirements for
laboratory conditions. The loudspeaker setup and the loudspeaker calibration and equalization procedure are described.
The simulation environment specified can be used for the evaluation and optimization of terminals and of complex
configurations including terminals, networks and other configurations. The main application areas should be: office,
home and car environment.
The setup and database as described in the present document are applicable for:
• Objective performance evaluation of terminals in different (simulated) background noise environments.
• Speech processing evaluation by using the pre-processed speech signal in the presence of background noise,
recorded by a terminal.
• Subjective evaluation of terminals by performing conversational tests, specific double talk tests or talking and
listening tests in the presence of background noise.
• Subjective evaluation in third party listening tests by recording the speech samples of terminals in the presence
of background noise.
- Standard63 pagesEnglish languagesale 15% off
- Standard63 pagesEnglish languagesale 15% off
- Standardization document63 pagesEnglish languagesale 10% offe-Library read for×1 day
The present document provides speech transmission performance requirements for narrowband and wideband media gateways from a QoS perspective as perceived by the user. Media gateways can be network or home based, they may include a transcoding function. The present document covers the following types of IP-based media gateways:
• ATA (Analogue Terminal Adapter), home gateway IP to POTS
• ITA (ISDN Terminal Adapter), home gateway IP to ISDN
• IAD (Integrated Access device), home router including ATA or ITA
• Network based ATA and ITA
• Carrier grade media gateway, network gateway IP to TDM
• IP-to-IP media gateway, network gateway with transcoding and/or other media processing
• New Generation DECT Fixed part with IP interface (only parameters not covered by New Generation DECT) Interfaces of media gateways used together with terminals as a system (i.e. connected via Ethernet or with a proprietary interface) are excluded in the present document and should be measured according to the relevant terminal standard. If a media gateway includes more than one interface type (e.g. POTS and ISDN), each interface has to be dealt with differently. The requirements available in the present document will ensure a high compatibility with IP- and TDM-based fixed and wireless terminals and networks, including DECT and mobile terminals. It is the aim to optimize interoperability, the listening and talking quality and the conversational performance. Related requirements and test methods are defined in the present document. The present document does not apply to media gateways with 4-wire analogue interfaces. The requirements for MGWs with respect to voiceband data (VBD) are out of scope in the present document. These requirements are covered in ETSI TS 102 929 [i.4].
- Standard54 pagesEnglish languagesale 15% off
- Standard54 pagesEnglish languagesale 15% off
- Standardization document54 pagesEnglish languagesale 10% offe-Library read for×1 day
The present document aims to identify and define testing methodologies which can be used to objectively evaluate the
performance of narrowband and wideband terminals and systems for speech communication in the presence of
background noise.
Background noise is a problem in mostly all situations and conditions and need to be taken into account in both,
terminals and networks. The present document provides information about the testing methods applicable to objectively
evaluate the speech quality in the presence of background noise. The present document includes:
• The description of the experts post evaluation process chosen to select the subjective test data being within the
scope of the objective methods.
• The results of the performance evaluation of the currently existing methods described in Recommendations
ITU-T P.862 [i.16] and P.862.1 [i.17] and in TOSQA2001 [i.19] which is chosen for the evaluation of
terminals in the framework of ETSI VoIP speech quality test events [i.8], [i.9], [i.10] and [i.11].
• The method which is applicable to objectively determine the different parameters influencing the speech
quality in the presence of background noise taking into account:
- the speech quality;
- the background noise transmission quality;
- the overall quality.
• The present document is to be used in conjunction with:
- ETSI ES 202 396-1 [i.1] which describes a recording and reproduction setup for realistic simulation of
background noise scenarios in lab-type environments for the performance evaluation of terminals and
communication systems.
- ETSI EG 202 396-2 [i.2] which describes the simulation of network impairments and how to simulate
realistic transmission network scenarios and which contains the methodology and results of the
subjective scoring for the data forming the basis of the present document.
- French speech sentences as defined in Recommendation ITU-T P.501 [i.13] for wideband and English
speech sentences as defined in Recommendation ITU-T P.501 [i.13] for narrowband.
- Standard82 pagesEnglish languagesale 15% off
- Standard82 pagesEnglish languagesale 15% off
- Guide82 pagesEnglish languagesale 10% offe-Library read for×1 day
The quality of background noise transmission is an important factor, which significantly contributes to the perceived
overall quality of speech. Existing and even more the new generation of terminals, networks and system configurations
including broadband services can be greatly improved with a proper design of terminals and systems in the presence of
background noise. The present document:
• describes a noise simulation environment using realistic background noise scenarios for laboratory use;
• contains a database including the relevant background noise samples for subjective and objective evaluation.
The present document provides information about the recording techniques needed for background noise recordings and
discusses the advantages and drawbacks of existing methods. The present document describes the requirements for
laboratory conditions. The loudspeaker setup and the loudspeaker calibration and equalization procedure are described.
The simulation environment specified can be used for the evaluation and optimization of terminals and of complex
configurations including terminals, networks and other configurations. The main application areas should be: office,
home and car environment.
The setup and database as described in the present document are applicable for:
• Objective performance evaluation of terminals in different (simulated) background noise environments.
• Speech processing evaluation by using the pre-processed speech signal in the presence of background noise,
recorded by a terminal.
• Subjective evaluation of terminals by performing conversational tests, specific double talk tests or talking and
listening tests in the presence of background noise.
• Subjective evaluation in third party listening tests by recording the speech samples of terminals in the presence
of background noise.
- Standard62 pagesEnglish languagesale 15% off
- Standard62 pagesEnglish languagesale 15% off
- Standardization document62 pagesEnglish languagesale 10% offe-Library read for×1 day
The present document provides speech transmission performance requirements for narrowband and wideband media
gateways from a QoS perspective as perceived by the user. Media gateways can be network or home based, they may
include a transcoding function. The present document covers the following types of IP-based media gateways:
• ATA (Analogue Terminal Adapter), home gateway IP to POTS
• ITA (ISDN Terminal Adapter), home gateway IP to ISDN
• IAD (Integrated Access device), home router including ATA or ITA
• Network based ATA and ITA
• Carrier grade media gateway, network gateway IP to TDM
• IP-to-IP media gateway, network gateway with transcoding and/or other media processing
• New Generation DECT Fixed part with IP interface (only parameters not covered by New Generation DECT)
Interfaces of media gateways used together with terminals as a system (i.e. connected via Ethernet or with a proprietary
interface) are excluded in the present document and should be measured according to the relevant terminal standard.
If a media gateway includes more than one interface type (e.g. POTS and ISDN), each interface has to be dealt with
differently.
The requirements available in the present document will ensure a high compatibility with IP-and TDM-based fixed and
wireless terminals and networks, including DECT and mobile terminals.
It is the aim to optimize interoperability, the listening and talking quality and the conversational performance. Related
requirements and test methods are defined in the present document.
The present document does not apply to media gateways with 4-wire analogue interfaces.
The requirements for MGWs with respect to voiceband data (VBD) are out of scope in the present document. These
requirements are covered in ETSI TS 102 929 [i.5].
- Standard55 pagesEnglish languagesale 15% off
- Standard55 pagesEnglish languagesale 15% off
- Standardization document55 pagesEnglish languagesale 10% offe-Library read for×1 day
The present document aims to identify and define testing methodologies which can be used to objectively evaluate the
performance of narrowband and wideband terminals and systems for speech communication in the presence of
background noise.
Background noise is a problem in mostly all situations and conditions and need to be taken into account in both,
terminals and networks. The present document provides information about the testing methods applicable to objectively
evaluate the speech quality in the presence of background noise. The present document includes:
• The description of the experts post evaluation process chosen to select the subjective test data being within the
scope of the objective methods.
• The results of the performance evaluation of the currently existing methods described in Recommendations
ITU-T P.862 [i.16] and P.862.1 [i.17] and in TOSQA2001 [i.19] which is chosen for the evaluation of
terminals in the framework of ETSI VoIP speech quality test events [i.8], [i.9], [i.10] and [i.11].
• The method which is applicable to objectively determine the different parameters influencing the speech
quality in the presence of background noise taking into account:
- the speech quality;
- the background noise transmission quality;
- the overall quality.
• The present document is to be used in conjunction with:
- ETSI ES 202 396-1 [i.1] which describes a recording and reproduction setup for realistic simulation of
background noise scenarios in lab-type environments for the performance evaluation of terminals and
communication systems.
- ETSI EG 202 396-2 [i.2] which describes the simulation of network impairments and how to simulate
realistic transmission network scenarios and which contains the methodology and results of the
subjective scoring for the data forming the basis of the present document.
- French speech sentences as defined in Recommendation ITU-T P.501 [i.13] for wideband and English
speech sentences as defined in Recommendation ITU-T P.501 [i.13] for narrowband.
- Standard83 pagesEnglish languagesale 15% off
- Standard83 pagesEnglish languagesale 15% off
- Guide83 pagesEnglish languagesale 10% offe-Library read for×1 day
Revision to take into account the MV comments. This part 2 is moved from EG to ES by TB decision.
- Standard38 pagesEnglish languagesale 15% off
- Guide38 pagesEnglish languagesale 10% offe-Library read for×1 day
The document will provide the umbrella for the different parts of this multi-part document as these are service specific (e.g. voice) on the one hand and transport network specific (e.g. IP) on the other hand.
- Standard10 pagesEnglish languagesale 15% off
- Standard10 pagesEnglish languagesale 15% off
- Guide10 pagesEnglish languagesale 10% offe-Library read for×1 day
The aim of DEG/STQ-00104-4 is to identify and define indicators and methodologies for a use in a context of end-user quality characterisation and supervision of multiplay services for Internet access, IPTV, VoD and for services associated to telephony offers.
- Guide43 pagesEnglish languagesale 10% offe-Library read for×1 day
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.