Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 5: Requirements for airbag gas generators (ISO 14451-5:2013)

This part of ISO 14451 specifies the types and order of tests to be applied to the airbag gas generators and sets out the acceptance criteria and means of categorization. This part of ISO 14451 applies to type tests. This part of ISO 14451 is not applicable to articles containing military explosives or commercial blasting agents except for black powder or flash composition.

Pyrotechnische Gegenstände - Pyrotechnische Gegenstände für Fahrzeuge - Teil 5: Anforderungen an Airbaggasgeneratoren (ISO 14451-5:2013)

Die vorliegende Norm legt die Arten und die Reihenfolge der anzuwendenden Prüfverfahren für Airbaggasgeneratoren
auf fest und legt die entsprechenden Bewertungskriterien fest.

Articles pyrotechniques - Articles pyrotechniques pour véhicules - Partie 5: Exigences relatives aux générateurs de gaz de sac gonflable (ISO 14451-5:2013)

L'ISO 14451-5:2013 spécifie les types et l'ordre des essais à réaliser sur les générateurs de gaz de sac gonflable et établit les critères d'acceptation correspondants et les règles de classement en catégories.
Elle est applicable aux essais de type.
Elle n'est pas applicable aux articles contenant des explosifs militaires ou des substances explosives commerciales, à l'exception de la poudre noire ou de la composition lumineuse.

Pirotehnični izdelki - Pirotehnični izdelki za vozila - 5. del: Zahteve za plinske generatorje zračnih blazin (ISO 14451-5:2013)

Ta del standarda ISO 14451 določa vrste in zaporedje preskusov za uporabo pri plinskih generatorjih zračnih blazin ter navaja merila sprejemljivosti in načine kategorizacije zadevnih generatorjev. Ta del standarda ISO 14451 se uporablja za tipske preskuse. Ta del standarda ISO 14451 se ne uporablja za izdelke, ki vsebujejo vojaški eksploziv ali tržne eksplozivne sestavine, razen črnega smodnika ali bliskovnega praška.

General Information

Status
Published
Public Enquiry End Date
24-Jun-2011
Publication Date
14-Apr-2013
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
27-Mar-2013
Due Date
01-Jun-2013
Completion Date
15-Apr-2013

Buy Standard

Standard
EN ISO 14451-5:2013
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14451-5:2013
01-maj-2013
3LURWHKQLþQLL]GHONL3LURWHKQLþQLL]GHONL]DYR]LODGHO=DKWHYH]DSOLQVNH
JHQHUDWRUMH]UDþQLKEOD]LQ ,62
Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 5: Requirements for airbag
gas generators (ISO 14451-5:2013)
Pyrotechnische Gegenstände - Pyrotechnische Gegenstände für Fahrzeuge - Teil 5:
Anforderungen an Airbaggasgeneratoren (ISO 14451-5:2013)
Articles pyrotechniques - Articles pyrotechniques pour véhicules - Partie 5: Exigences
relatives aux générateurs de gaz de sac gonflable (ISO 14451-5:2013)
Ta slovenski standard je istoveten z: EN ISO 14451-5:2013
ICS:
43.040.80 Varnostne naprave in sistemi Safety installations and
za zadrževanje restraint systems
71.100.30 Eksplozivi. Pirotehnika Explosives. Pyrotechnics
SIST EN ISO 14451-5:2013 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14451-5:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 14451-5:2013


EUROPEAN STANDARD
EN ISO 14451-5

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2013
ICS 43.040.80
English Version
Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 5:
Requirements and categorization for airbag gas generators (ISO
14451-5:2013)
Articles pyrotechniques - Articles pyrotechniques pour Pyrotechnische Gegenstände - Pyrotechnische
véhicules - Partie 5: Exigences relatives aux générateurs Gegenstände für Fahrzeuge - Teil 5: Anforderungen und
de gaz de sac gonflable et leur classement en catégories Kategorisierung von Airbaggasgeneratoren (ISO 14451-
(ISO 14451-5:2013) 5:2013)
This European Standard was approved by CEN on 9 February 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14451-5:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14451-5:2013
EN ISO 14451-5:2013 (E)
Contents Page
Foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EC Directive 2007/23/EC on the placing on the market of pyrotechnic
articles . 4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 14451-5:2013
EN ISO 14451-5:2013 (E)
Foreword
This document (EN ISO 14451-5:2013) has been prepared by Technical Committee CEN/TC 212
“Pyrotechnic articles” the secretariat of which is held by NEN, in collaboration with Technical Committee
ISO/TC 22 "Road vehicles".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2013, and conflicting national standards shall be
withdrawn at the latest by September 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14451-5:2013 has been approved by CEN as EN ISO 14451-5:2013 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 14451-5:2013
EN ISO 14451-5:2013 (E)
Annex ZA
(informative)

Relationship between this European Standard and the Essential
Requirements of EC Directive 2007/23/EC on the placing on the market
of pyrotechnic articles
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directive 2007/23/EC on the placing on the market of pyrotechnic articles.
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the normative clauses of
this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption of
conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Directive 2007/23/EC on the
placing on the market of pyrotechnic articles (1 of 2)
Clause(s)/sub-clause(s) of Essential Safety Requirements
Qualifying remarks/Notes
this document (ESRs) of Directive 2007/23/EC
Note: It is taken into account that the
intended purpose of the pyrotechnic
4.8, 4.9 (1)
article is to function in a vehicle in case
of accidents
(2) See ISO 14451-2
4.9 (3) 1st sentence
Note: It is taken into account that the
intended purpose of the pyrotechnic
4.9 (3) 2nd and 3rd sentences
article is to function in a vehicle in case
of accidents
4.2 (3a)
4.5 (3b)
4.3, 4.4, 4.6 (3c)
4.5 (3d)
4.5 (3e)
4.4, 4.5 (3f)
4.6 (3g)
(3h) See ISO 14451-3
4.3, 4.5 (3i)
(3j) See ISO 14451-2
4.3, 4.4, 4.6 (3) Last sentence
1 (4a)
1 (4b)
4

---------------------- Page: 6 ----------------------

SIST EN ISO 14451-5:2013
EN ISO 14451-5:2013 (E)
Table ZA.1 — (2 of 2)
Clause(s)/sub-clause(s) of Essential Safety Requirements
Qualifying remarks/Notes
this document (ESRs) of Directive 2007/23/EC
4.2, 4.9, 6 (5 B.1)
See ISO 14451-2
(5 B.2)
and ISO 14451-3
4.6, 4.7 (5 B.3)
(5 B.4) Not applicable
(5 C.1) to (5 C.5) Not applicable
4.2 (5 C.6)
(5 C.7) Not applicable

WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this part of EN ISO 14451.

5

---------------------- Page: 7 ----------------------

SIST EN ISO 14451-5:2013

---------------------- Page: 8 ----------------------

SIST EN ISO 14451-5:2013
INTERNATIONAL ISO
STANDARD 14451-5
First edition
2013-03-15
Pyrotechnic articles — Pyrotechnic
articles for vehicles —
Part 5:
Requirements and categorization for
airbag gas generators
Articles pyrotechniques — Articles pyrotechniques pour véhicules —
Partie 5: Exigences relatives aux générateurs de gaz de sac gonflable
et leur classement en catégories
Reference number
ISO 14451-5:2013(E)
©
ISO 2013

---------------------- Page: 9 ----------------------

SIST EN ISO 14451-5:2013
ISO 14451-5:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 14451-5:2013
ISO 14451-5:2013(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements and acceptance criteria . 1
4.1 General . 1
4.2 Verification of design and documentation . 1
4.3 Drop test . 1
4.4 Vibration and temperature test . 2
4.5 Thermal humidity cycling test . 2
4.6 Electrostatic discharge (ESD) test .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.