Type B helical video recorders

Applies to magnetic video recording and/or reproducing using 25.4 mm (1 in) tape on type B helical-scan recorders suitable for broadcast applications. Defines the electrical and mechanical characteristics of equipment which will provide for interchangeability of recordings. The requirements given are related to 525 line-60 field and 625 line-50 field systems.

Videobandgeräte mit Schrägspuraufzeichnung Typ B

Magnétoscopes à enregistrement hélicoïdal de type B

Est applicable à l'enregistrement et (ou) à la reproduction magnétique vidéo utilisant la bande de 25,4 mm (1 in) sur les magnétoscopes à enregistrement hélicoïdal de type B convenant aux applications de radiodiffusion. Définit les caractéristiques électriques et mécaniques des équipements qui permettront l'interchangeabilité des enregistrements. Les exigences indiquées sont relatives aux systèmes à 525 lignes-60 trames ou 625 lignes-50 trames.

Type B helical video recorders (IEC 60602:1980 + A1:1987)

General Information

Status
Withdrawn
Publication Date
30-Jun-1999
Withdrawal Date
07-Nov-2023
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
03-Aug-2023
Due Date
26-Aug-2023
Completion Date
08-Nov-2023

Buy Standard

Standardization document
HD 574 S1:1999
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 574 S1:1999
01-julij-1999
Type B helical video recorders (IEC 60602:1980 + A1:1987)
Type B helical video recorders
Videobandgeräte mit Schrägspuraufzeichnung Typ B
Magnétoscopes à enregistrement hélicoïdal de type B
Ta slovenski standard je istoveten z: HD 574 S1:1990
ICS:
33.160.40 Video sistemi Video systems
SIST HD 574 S1:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST HD 574 S1:1999

---------------------- Page: 2 ----------------------

SIST HD 574 S1:1999

---------------------- Page: 3 ----------------------

SIST HD 574 S1:1999

---------------------- Page: 4 ----------------------

SIST HD 574 S1:1999
NORME CEI
INTERNATIONALE IEC
60602
INTERNATIONAL
Première édition
STAN
DARD
First edition
1980-01
Magnétoscopes à enregistrement hélicoïdal
de type B
Type B helical video recorders
© IEC 1980 Droits de reproduction réservés — Copyright - all rights reserved
Aucune partie
de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun any form or by any means, electronic or mechanical,
procédé, électronique ou mécanique, y compris la photo- including photocopying and microfilm, without permission in
copie les
et microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
N
PRICE CODE
International Electrotechnical Commission
IEC
MemityHapoctHaH GnewrpoTexHH4ecKaR KOMHCCHR
Pour prix, voir catalogue en vigueur
• • For price, see current catalogue

---------------------- Page: 5 ----------------------

SIST HD 574 S1:1999
3
CONTENTS
Page
5
FOREWORD
PREFACE 5
Clause
I. Scope 7
7
2. Object
7
3. Format description
7
4. Environment
7
5. Tape and spools
7
5.1 Dimensions of magnetic tape for television
9
5.2 Spools
Magnetic tape properties 11
5.3
11
6. Mechanical parameters
1 I 6.1 Scanning configuration
Speeds of the tape and of the video-head wheel 13
6.2
15
Position of the recorded tracks 6.3
7. Electrical parameters 21
21
7.1 Modulation system
Characteristic frequencies 21
7.2
7.3 Pre-emphasis and de-emphasis 21
21
7.4 Recording of the audio track
23
Specification of the recording of the field synchronizing and control signals 7.5
27
Transmission characteristics of the signal chain APPENDIX A

---------------------- Page: 6 ----------------------

SIST HD 574 S1:1999
5
INTERNATIONAL ELECTROTECHNICAL COMMISSION
TYPE B HELICAL VIDEO RECORDERS
FOREWORD
I) The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on which all the
National Committees having a special interest therein are represented, express, as nearly as possible, an international consensus
of opinion on the subjects dealt with.
2) They have the form of recommendations for international use and they are accepted by the National Committees in that sense.
In order to promote international unification, the IEC expresses the wish that all National Committees should adopt
3)
the text of the I EC recommendation for their national rules in so far as national conditions will permit. Any divergence
between the IEC recommendation and the corresponding national rules should, as far as possible, be clearly indicated in
the latter.
PREFACE
This standard has been prepared by Sub-Committee 60B: Video Recording, of IEC Technical
Committee No. 60: Recording.
Drafts were discussed at the meeting held in Budapest in 1978. As a result of this meeting, a draft,
Document 60B(Central Office)29, was submitted to the National Committees for approval under the
Six Months' Rule in September 1978.
The National Committees of the following countries voted in favour of publication:
Japan
Australia
Korea (Democratic People's
Austria
Republic of)
Belgium
Netherlands
Canada
Poland
Czechoslovakia
Romania
Denmark
South Africa (Republic of) Egypt
Finland Spain
Switzerland
France
Turkey
Germany
Italy United Kingdom
United States of America
Other IEC publications quoted in this standard.
and Reproducing Systems.
Publications Nos. 94: Magnetic Tape Sound Recordin g
461: Time and Control Code for Video Tape Recordings.
503: Spools for l in (25.4 mm) Video Magnetic Tape.

---------------------- Page: 7 ----------------------

SIST HD 574 S1:1999
—7—
TYPE B HELICAL VIDEO RECORDERS
1. Scope
This standard applies to magnetic video recording and/or reproduction using 25.4 mm (1 in)
tape on type B helical-scan recorders suitable for broadcast applications.
2. Object
The object of this standard is to define the electrical and mechanical characteristics of equipment
which will provide for interchange
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.