SIST EN 201:2009

Oznaka standarda: SIST EN 201:2009
Koda projekta: 00145041
Organizacija: SIST
Naslov (angleški): Plastics and rubber machines - Injection moulding machines - Safety requirements
Naslov (slovenski): Stroji za predelavo gume in plastike - Stroji za brizgalno vlivanje - Varnostne zahteve
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 20% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 201:2009 angleški jezik Withdrawn SIST-M: 119.79 EUR
PDF
Papir
Tehnični odbor: VSN - Varnost strojev in naprav
ICS: 83.200
Status: Razveljavljen
Objavljen: 01-Dec-2009
Refer. št. objave: Sporočila 2009-12
Razveljavitev: 01-Feb-2021
Referenca razveljavitve: Sporocila 2021-02
Referenčna oznaka: EN 201:2009
Področje projekta (angleško): This European Standard specifies the essential safety requirements for injection moulding machines for the processing of plastics and/or rubber. All hazards listed in Clause 4 are covered by this standard. The following machines are not covered: - machines on which the clamping unit can only be operated by the physical force of the operator; - injection moulding machines with pneumatic drives for the platen movement; - injection moulding machines with vertical platen movements driven by an electrical axis; - blow moulding machines associated with an injection process (EN 422); - machines for reaction injection moulding (RIM) (EN 1612-1); - presses (EN 289); - footwear moulding machines covered by EN 1845. The safety requirements for the interaction between injection moulding machines and ancillary equipment are specified. This standard covers magnetic clamping systems only if: - machines have horizontal clamping units; and - the mould area is protected by guards; and - such systems are delivered at the same time as the injection moulding machine by the machine manufacturer.
Povezava na standarde
Povezava Ime Datum
Nadomešča SIST EN 201:2000/A2:2005 - Stroji za predelavo gume in plastike – Stroji za brizgalno vlivanje – Varnostne zahteve – Dopolnilo A2 01-Dec-2009
Nadomešča SIST EN 201:2000 - Rubber and plastics machines - Injection moulding machines - Safety requirements 01-Dec-2009
Nadomešča SIST EN 201:2000/A1:2002 - Stroji za predelavo gume in plastike - Stroji za brizgalno vlivanje - Varnostne zahteve - Dopolnilo A1 01-Dec-2009
Nadomeščen z SIST EN ISO 20430:2021 - Stroji za predelavo gume in plastike - Stroji za brizgalno vlivanje - Varnostne zahteve (ISO 20430:2020) 08-Jul-2020


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi