Explosives for civil uses - Detonating cords and safety fuses - Part 7: Determination of reliability of initiation of detonating cords

This European standard specifies a method for determining the reliability of initiation of flexible plastics-coated detonating cords and flexible fibrous-overbraided detonating cords for civil uses, by a detonator of defined initiating capability.

Explosivstoffe für zivile Zwecke - Sprengschnüre und Sicheheitsanzündschnüre - Teil 7: Bestimmung der Zuverlässigkeit der Zündung von Sprengschnüren

Explosifs a usage civil - Cordeaux détonants et meches de sureté - Partie 7: Détermination de la fiabilité de l'amorcage des cordeaux détonants

La présente Norme européenne spécifie une méthode de détermination de la fiabilité de l'amorçage des cordeaux détonants flexibles recouverts de plastique et des cordeaux détonants flexibles sous fibre tressée a usage civil par un détonateur possédant une capacité d'amorçage définie.

Eksplozivi za civilno uporabo – Detonacijske in počasi goreče vžigalne vrvice – 7. del: Ugotavljanje zanesljivosti iniciacije detonacijskih vrvic

General Information

Status
Published
Publication Date
30-Nov-2002
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2002
Due Date
01-Dec-2002
Completion Date
01-Dec-2002

Relations

Buy Standard

Standard
EN 13630-7:2002
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosivstoffe für zivile Zwecke - Sprengschnüre und Sicheheitsanzündschnüre - Teil 7: Bestimmung der Zuverlässigkeit der Zündung von SprengschnürenExplosifs a usage civil - Cordeaux détonants et meches de sureté - Partie 7: Détermination de la fiabilité de l'amorcage des cordeaux détonantsExplosives for civil uses - Detonating cords and safety fuses - Part 7: Determination of reliability of initiation of detonating cords71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13630-7:2002SIST EN 13630-7:2002en01-december-2002SIST EN 13630-7:2002SLOVENSKI
STANDARD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13630-7September 2002ICS 71.100.30English versionExplosives for civil uses - Detonating cords and safety fuses -Part 7: Determination of reliability of initiation of detonating cordsExplosifs à usage civil - Cordeaux détonants et mèches desûreté - Partie 7: Détermination de la fiabilité de l'amorcagedes cordeaux détonantsExplosivstoffe für zivile Zwecke - Sprengschnüre undSicheheitsanzündschnüre - Teil 7: Bestimmung derZuverlässigkeit der Zündung von SprengschnürenThis European Standard was approved by CEN on 11 July 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13630-7:2002 E



EN 13630-7:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Principle.45Apparatus.46Test pieces.57Procedure.58Test report.6Annex A (informative)
Range of applicability of the test method.7Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.8



EN 13630-7:2002 (E)3ForewordThis document (EN 13630-7:2002) has been prepared by Technical Committee CEN/TC 321 "Explosives for civiluses", the secretariat of which is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by March 2003, and conflicting national standards shall be withdrawn at the latest byMarch 2003.This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document.This European Standard is one of a series of standards on Explosives for civil uses – Detonating cords and safetyfuses. The other parts of this series are:prEN 13630-1Part 1: Requirements.EN 13630-2Part 2: Determination of thermal stability of detonating cords and safety fuses.EN 13630-3Part 3:Determination of sensitiveness to friction of the core of detonating cords.EN 13630-4Part 4: Determination of sensitiveness to impact of detonating cords.prEN 13630-5Part 5: Determination of resistance to abrasion of detonating cords.EN 13630-6Part 6: Determination of resistance to tension of detonating cords.EN 13630-
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.