iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 28073:1997/AC:1997

(Amendment)

Information technology - Telecommunications and information exchange between systems - Open Systems Interconnection - Protocol for providing the connection-mode transport service (ISO/IEC 8073:1992 and Technical Corrigendum 1:1993)

Information technology - Telecommunications and information exchange between systems - Open Systems Interconnection - Protocol for providing the connection-mode transport service (ISO/IEC 8073:1992 and Technical Corrigendum 1:1993)

Informationstechnik - Telekommunikation und Informationsaustausch zwischen Systemen - Kommunikation offener Systeme - Protokoll zur Erbringung des verbindungsorientierten Transportdienstes (ISO/IEC 8073:1992 und Technisches Corrigendum 1:1993)

Technologies de l'information - Télécommunications et échange d'informations entre systemes - Interconnexion de systemes ouverts (OSI) - Protocole pour fourniture du service de transport en mode connexion (ISO/IEC 8073:1992 et rectificatif technique 1:1993)

Information technology - Telecommunications and information exchange between systems - Open Systems Interconnection - Protocol for providing the connection-mode transport service (ISO/IEC 8073:1992 and Technical Corrigendum 1:1993)

General Information

Status
Withdrawn
Publication Date
30-Nov-1997
Withdrawal Date
30-Sep-2003
ICS
35.100.40 - Transport layer
Technical Committee
ITC - Information technology
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Oct-2003
Due Date
01-Oct-2003
Completion Date
01-Oct-2003
Ref Project
EN 28073:1993/AC:1994 - Information technology - Telecommunications and information exchange between systems - Open Systems Interconnection - Protocol for providing the connection-mode transport service (ISO/IEC 8073:1992 and Technical Corrigendum 1:1993)

Relations

Corrects
SIST EN 28073:1997 - Information technology - Telecommunications and information exchange between systems - Open Systems Interconnection - Protocol for providing the connection-mode transport service (ISO/IEC 8073:1992 and Technical Corrigendum 1:1993)
Effective Date
22-Dec-2008

Buy Standard

EN 28073:1997/AC:1997EN 28073:1997/AC:1997
PreviousNext
Corrigendum
EN 28073:1997/AC:1997
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Information technology - Telecommunications and information exchange between systems - Open Systems Interconnection - Protocol for providing the connection-mode transport service (ISO/IEC 8073:1992 and Technical Corrigendum 1:1993)Informationstechnik - Telekommunikation und Informationsaustausch zwischen Systemen - Kommunikation offener Systeme - Protokoll zur Erbringung des verbindungsorientierten Transportdienstes (ISO/IEC 8073:1992 und Technisches Corrigendum 1:1993)Technologies de l'information - Télécommunications et échange d'informations entre systemes -
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 300 392-3-9 V1.2.1:2020(Main)
Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 3: Interworking at the Inter-System Interface (ISI) - Sub-part 9: Transport layer independent, General design
ETSI EN 300 392-3-9 V1.2.1 (2020-04)

The present document defines the general aspects of interworking at the Inter-System Interface (ISI) for Terrestrial Trunked Radio (TETRA) system supporting Voice plus Data (V+D). Those specify the general concepts which are the basis of the ISI operation between TETRA systems. It introduces the Additional Network Features (ANFs) used at the ISI, and specifies:
• the general protocol mechanism upon which the definition of each ANF is based; and
• the security related functions over the ISI.
The specification of the general transport layer independent protocol mechanism applies to any TETRA Switching and Management Infrastructure (SwMI) which supports the ISI. The security requirements for the ISI only apply to SwMIs which support authentication or end-to-end encryption over the ISI. Besides the ISI general design, the present sub-part, interworking at the Inter-System Interface comprises the following other sub-parts:
• General design, PSS1 over E.1 [3];
• General design, SIP/IP [4];
• Transport layer independent Additional Network Feature Individual Call (ANF-ISIIC) [5];
• Transport layer independent Additional Network Feature Group Call (ANF-ISIGC) [6];
• Transport layer independent Additional Network Feature Short Data Service (ANF-ISISDS) [7];
• Transport layer independent Additional Network Feature, Mobility Management (ANF-ISIMM) [8]; and
• Generic Speech Format Implementation [9].

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    38 pages
    English language
    sale 15% off
  • Standard
    38 pages
    English language
    sale 15% off
  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-3-12 V1.2.1:2020(Main)
Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 3: Interworking at the Inter-System Interface (ISI) - Sub-part 12: Transport layer independent Additional Network Feature Individual Call (ANF-ISIIC)
ETSI EN 300 392-3-12 V1.2.1 (2020-04)

The present document defines the Terrestrial Trunked Radio (TETRA) system supporting Voice plus Data (V+D). It specifies:
• the interworking of individual calls between TETRA networks;
• the supplementary services interaction with individual calls between TETRA networks.
The TETRA V+D interworking - basic operation part defines the interworking between TETRA networks over the corresponding interface: the Inter-System Interface (ISI). It comprises the following sub-parts:
• Transport layer independent General design [2];
• General Design, PSS1 over E.1 [3];
• General Design, SIP/IP [4];
• Transport layer independent Additional Network Feature - ISI Individual Call (ANF-ISIIC) (the present document);
• Transport layer independent Additional Network Feature - ISI Group Call (ANF-ISIGC) [5];
• Transport layer independent Additional Network Feature - ISI Short Data service (ANF-ISISDS) [i.8];
• Transport layer independent Additional Network Feature - ISI Mobility Management (ANF-ISIMM) [6];
• Generic Speech Format Implementation [i.7].
The present document is the ANF-ISIIC sub-part. Like all other Additional Network Feature (ANF) specifications, those of ANF-ISIIC are produced in three stages, according to the method described in Recommendation ITU-T I.130 [i.4]. The present document contains the stage 1 and 2 descriptions of ANF-ISIIC, and stage 3 description. The stage 1 description specifies the ANF as seen by its users, which are essentially the individual call control entities in both TETRA networks. The stage 2 description identifies the functional entities involved in the ANF and the information flows between them. And the stage 3 description of ANF-ISIIC specifies its protocol. NOTE 1: According to Recommendation ITU-T I.130 [i.4], the stage 3 description of a bearer or tele-service addresses the network implementation aspects. Consequently, it comprises two steps: the specifications of all protocols at the various reference points involved in any of the service procedures (notably the service operation) are the first step of the stage 3 description, and the specifications of the functions of the corresponding network entities are its second step. NOTE 2: The SDL diagrams have not been provided since they can be derived from the specification of the functional entity actions in the stage 2 description. The present document applies to TETRA networks which support inter-TETRA individual calls. More specifically, it applies to their Circuit Mode Control Entities (CMCE), as defined in clause 14.2 of ETSI EN 300 392-2 [1], and to their ANF-ISIIC entities defined in the stage 2 description. The relation between the ANF-ISIIC and the transport layer protocol is described in the General Design documents [2], [3] and [4].

  • Standard
    117 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    117 pages
    English language
    sale 15% off
  • Standard
    117 pages
    English language
    sale 15% off
  • Draft
    117 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-3-14 V1.2.1:2020(Main)
Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 3: Interworking at the Inter-System Interface (ISI) - Sub-part 14: Transport layer independent Additional Network Feature Short Data Service (ANF-ISISDS)
ETSI EN 300 392-3-14 V1.2.1 (2020-04)

The TETRA V+D interworking - at the Inter-System Interface (ISI) part defines the interworking between TETRA networks over the corresponding interface: the Inter-System Interface (ISI). It comprises the following sub-parts:
• Transport layer independent General design [3];
• General Design, PSS1 over E.1 [i.2];
• General Design, SIP/IP [i.3];
• Transport layer independent Additional Network Feature - ISI Individual Call (ANF-ISIIC) [i.4];
• Transport layer independent Additional Network Feature - ISI Group Call (ANF-ISIGC) [2];
• Transport layer independent Additional Network Feature - ISI Short Data service (ANF-ISISDS) (the present document);
• Transport layer independent Additional Network Feature - ISI Mobility Management (ANF-ISIMM) [i.5];
• Generic Speech Format Implementation [i.6].
The present document specifies the Additional Network Function (ANF) - Inter-System Interface (ISI) Short Data service (ANF-ISISDS) which is part of the Interworking at the Inter-System Interface (ISI) of the Terrestrial Trunked Radio system (TETRA) supporting Voice and Data (V+D). This service comprises of:
• TETRA short message transmission over the ISI to individual and group addresses;
• TETRA pre-defined status message transmission over the ISI to individual and group addresses.
ANF-ISISDS enables short data and status messages to be transferred between a user registered in one TETRA network to another user registered in another TETRA network, operating at the ISI of both SwMIs. Like all other Additional Network Feature (ANF) specifications, those of ANF-ISISDS are produced in three stages, according to the method described in Recommendation ITU-T I.130 [4]. The present document contains the stage 1 and 2 descriptions of ANF-ISIIC, and stage 3 description. The stage 1 description specifies the ANF as seen by its users, which are essentially the CMCE SDS entities in both TETRA networks. The stage 2 description identifies the functional entities involved in the ANF and the information flows between them. The stage 3 description of ANF-ISISDS specifies its protocol.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    27 pages
    English language
    sale 15% off
  • Standard
    29 pages
    English language
    sale 15% off
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-3-15 V1.2.1:2020(Main)
Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 3: Interworking at the Inter-System Interface (ISI) - Sub-part 15: Transport layer independent Additional Network Feature, Mobility Management (ANF-ISIMM)
ETSI EN 300 392-3-15 V1.2.1 (2020-04)

The present document defines the mobility management of interworking at the Inter-System Interface (ISI) for Terrestrial Trunked Radio (TETRA) system supporting Voice plus Data (V+D). The TETRA V+D Inter-working - basic operation part defines the Inter-System Interface (ISI) between the SwMIs as specified in the following sub-parts:
• Transport layer independent, General design [i.5].
• General design, PSS1 over E.1 [13].
• General design, SIP/IP [14].
• Transport layer independent Additional Network Feature Individual Call (ANF-ISIIC) [9].
• Transport layer independent Additional Network Feature Group Call (ANF-ISIGC) [10].
• Transport layer independent Additional Network Feature Short Data Service (ANF-ISISDS) [i.2].
• Transport layer independent Additional Network Feature, Mobility Management (ANF-ISIMM) (the present document).
• Generic Speech Format Implementation [i.4].
NOTE: These TSs are produced in analogy with the Recommendation ITU-T I.130 [4].
The present document contains the ANF-ISIMM part. The ANF-ISIMM part defines additional Mobility Management (MM) services to the SwMIs. If supported, the ANF-ISIMM services complement the intra-SwMI-MM, authentication and key management services. In support of these, the ANF-ISIMM enables the invocation and operation of these services between the SwMIs over the ISI. Thus, ANF-ISIMM offers the following services:
• Migration and restricted migration.
• Individual subscriber and group profile update.
• Supplementary Service profile update.
• De-registration.
• Group attachment/detachment.
• Linked group attachment/detachment.
• Individual subscriber and group database recovery.
• Authentication, one-directionally or mutually between the individual subscriber and the home SwMI.
• Over-The-Air-Re-keying (OTAR) for Static Cipher Key (SCK) generation and SCK delivery. For the following service are only included in the stage 1 descriptions:
• Group Linking/unlinking.
• GTSI attachment/detachment to a linking participating group from another SwMI.

  • Standard
    379 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    379 pages
    English language
    sale 15% off
  • Standard
    387 pages
    English language
    sale 15% off
  • Draft
    387 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 300 392-3-13 V1.2.1:2020(Main)
Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 3: Interworking at the Inter-System Interface (ISI) - Sub-part 13: Transport layer independent Additional Network Feature Group Call (ANF-ISIGC)
ETSI EN 300 392-3-13 V1.2.1 (2020-04)

The present document defines the group call communication of interworking at the Inter-System Interface (ISI) for Terrestrial Trunked Radio system (TETRA) supporting Voice plus Data (V+D). The TETRA V+D interworking - basic operation part defines the interworking between TETRA networks over the corresponding interface: the Inter-System Interface (ISI). It comprises the following sub-parts:
• Transport Layer Independent Specification ISI general design [2];
• General Design, PSS1 over E.1 [i.7];
• General Design, SIP/IP [i.8];
• Transport Layer Independent Additional Network Feature - ISI Individual Call (ANF-ISIIC) [3];
• Transport Layer Independent Additional Network Feature Group Call (ANF-ISIGC) (the present document);
• Transport Layer Independent Additional Network Feature Short Data service (ANF-ISISD) [i.9];
• Transport Layer Independent Additional Network Feature Mobility Management (ANF-ISIMM) [4];
• Generic Speech Format Implementation [i.10].
The present document is the ANF-ISIGC sub-part 3-13. In analogy with Recommendation ITU-T I.130 [i.3], the stage one, stage two and stage three of the three level structure is used to describe the TETRA Inter-System Interface services as provided by European Private or Public Trunked Radio System operators:
• Stage 1, is an overall service description, from the service subscriber's and user's standpoint;
• Stage 2, identifies the functional capabilities and information flows needed to support the services described in stage 1; and
NOTE: The information flows in stage 2 have been drawn as Message Sequence Charts (MSC).
• Stage 3, defines the signalling system protocols and functions needed to implement the services described in stage 1.
The present document details the Interworking Basic Operation of the Terrestrial Trunked Radio system (TETRA). Specifically the present document details the stage 1 aspects (overall service description) of the ANF-ISIGC as seen from the TETRA Switching and Maintenance Infrastructure point of view at the Inter-System Interface (ISI). It details the stage 2 aspects (functional partitioning) of ANF-ISIGC which includes the identification of the functional entities and the flows between them, and finally it details the stage 3 signalling protocols for the ANF-ISIGC services, i.e. the protocols at the relevant reference points between the functional entities defined in stage 2. The ANF-ISIGC service specifies:
• TETRA Group Call Clear Speech over the ISI, acknowledged and unacknowledged;
• TETRA Group Call End-to-End Encrypted Speech over the ISI;
• TETRA Group Call Circuit Mode one slot data over the ISI;
• TETRA Group Call Circuit Mode one slot End-to-End Encrypted data over the ISI;
• TETRA Group Call Circuit Mode N × 2,4 kbit/s, N × 4,8 kbit/s or N × 7,2 kbit/s data, with N = 2, 3 or 4;
• TETRA Group Call Circuit Mode N × 2,4 kbit/s N × 4,8 kbit/s or N × 7,2 kbit/s End-to-End Encrypted data,
with N = 2, 3 or 4.

  • Standard
    191 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    191 pages
    English language
    sale 15% off
  • Standard
    191 pages
    English language
    sale 15% off
  • Draft
    191 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61784-5-20:2019(Main)
Industrial communication networks - Profiles - Part 5-20: Installation of fieldbuses - Installation profiles for CPF 20 (IEC 61784-5-20:2018)
EN IEC 61784-5-20:2018

This part of IEC 61784 specifies the installation profiles for CPF 20 (ADS-net1)..
The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2018.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61784-5-8:2019(Main)
Industrial communication networks - Profiles - Part 5-8: Installation of fieldbuses - Installation profiles for CPF 8 (IEC 61784-5-8:2018)
EN IEC 61784-5-8:2018

This part of IEC 61784-5 specifies the installation profiles for CPF 8 (CC-Link1).
The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2018.

  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61784-5-18:2019(Main)
Industrial communication networks - Profiles - Part 5-18: Installation of fieldbuses - Installation profiles for CPF 18 (IEC 61784-5-18:2018)
EN IEC 61784-5-18:2018

This part of IEC 61784-5 specifies the installation profiles for CPF 18 (SafetyNET p1).
The installation profiles are specified in Annex A. This annex is read in conjunction with IEC 61918:2018.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61784-5-21:2019(Main)
Industrial communication networks - Profiles - Part 5-21: Installation of fieldbuses - Installation profiles for CPF 21 (IEC 61784-5-21:2018)
EN IEC 61784-5-21:2018

This part of IEC 61784 specifies the installation profile for CPF 21 (FL-net1).
The installation profile is specified in Annex A. The annex is read in conjunction with IEC 61918:2018.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61784-5-6:2019(Main)
Industrial communication networks - Profiles - Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6 (IEC 61784-5-6:2018)
EN IEC 61784-5-6:2018

This part of IEC 61784-5 specifies the installation profiles for CPF 6 (INTERBUS)1.
The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:2018.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day