SIST EN 13082:2009

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - GaspendelventilCiternes de transport de matieres dangereuses - Equipement de service pour citernes - Event de transfert des vapeurs récupéréesTanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve23.060.20Zapirni ventili (kroglasti in pipe)Ball and plug valves23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 13082:2008SIST EN 13082:2009en,fr,de01-april-2009SIST EN 13082:2009SLOVENSKI
STANDARDSIST EN 13082:20021DGRPHãþD



SIST EN 13082:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13082November 2008ICS 13.300; 23.020.20; 23.060.20Supersedes EN 13082:2001
English VersionTanks for transport of dangerous goods - Service equipment fortanks - Vapour transfer valveCiternes de transport de matières dangereuses -Equipement de service pour citernes - Event de transfertdes vapeurs récupéréesTanks für die Beförderung gefährlicher Güter -Bedienungsausrüstung von Tanks - GaspendelventilThis European Standard was approved by CEN on 13 September 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13082:2008: ESIST EN 13082:2009



EN 13082:2008 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Functions.6 5 Design characteristics.6 5.1 General.6 5.2 Performance characteristics.6 5.3 Temperature range.6 5.4 Actuation.6 5.5 Materials of construction.6 5.6 Dimensional characteristics.6 5.6.1 Maximum height.6 5.6.2 Flanged connection type.7 5.6.3 Through hole connection type.7 6 Tests.7 6.1 General.7 6.2 Production tests.7 6.2.1 General.7 6.2.2 Shell tightness test.8 6.2.3 Internal seat tightness test.8 6.2.4 Operability test.8 6.2.5 Test results.8 6.3 Type tests.8 6.3.1 General.8 6.3.2 Shell strength test.9 6.3.3 Shell tightness test.9 6.3.4 Internal seat tightness test.9 6.3.5 Mechanical endurance test.9 6.3.6 Drop test.10 6.3.7 Test results.11 7 Marking.11 8 Installation, operation and maintenance instructions.11 Annex A (normative)
Drop test apparatus.12 Annex B (normative)
Maximum height - Installation requirement.13 Bibliography.14
SIST EN 13082:2009



EN 13082:2008 (E) 3 Foreword This document (EN 13082:2008) has been prepared by Technical Committee CEN/TC 296 “Tanks for transport of dangerous goods”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the latest by May 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13082:2001. This European Standard has been submitted for reference into the RID and/or in the technical annexes of the ADR [2]. Therefore in this context the standards listed in the normative references and covering basic requirements of the RID/ADR not addressed within the present standard are normative only when the standards themselves are referred to in the RID and/or in the technical annexes of the ADR. This European Standard forms part of a coherent standards programme comprising the following standards,, under the general title "Tanks for transport of dangerous goods - Service equipment for tanks": EN 13081, Vapour collection adaptor and coupler EN 13082, Vapour transfer valve EN 13083, Adaptor for bottom loading and unloading EN 13308, Non-pressure balanced footvalve EN 13314, Fill hole cover EN 13315, Gravity discharge coupler EN 13316, Pressure balanced footvalve EN 13317, Manhole cover assembly EN 13922, Overfill prevention systems for liquid fuels EN 14595, Pressure and Vacuum Breather Vent EN 14596, Emergency pressure relief valve EN 15208, Sealed parcel delivery systems – Working principles and interface specifications The standards programme also includes the following Technical Report: CEN/TR 15120, Guidance and recommendations for loading, transport and unloading. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 13082:2009



EN 13082:2008 (E) 4 Introduction The vapour transfer valve is part of the vapour collection system that is required to comply with the European Directive 94/63/EC on Volatile Organic Compounds (VOC) [1]. The vapour transfer valve, subject of this European Standard, governs the transfer of vapour between the vehicle compartment, the gantry equipment and the service-station tank storage during loading and unloading operations. SIST EN 13082:2009



EN 13082:2008 (E) 5 1 Scope This European Standard covers the vapour transfer valve, used for the transfer of vapour between the tank compartment and the pipework connecting to the vapour collection adaptor. This European Standard specifies the performance requirements and the critical dimensions of the vapour transfer valve. It also specifies the tests necessary to verify the compliance of the equipment with this European Standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no sub-classification as toxic or corrosive. 2 Normative references
...