iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60099-4:2014

(Main)

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

EN IEC 60099-4 applies to non-linear metal-oxide resistor type surge arresters without spark gaps designed to limit voltage surges on a.c. power circuits with Us above 1 kV.

Überspannungsableiter - Teil 4: Metalloxidableiter ohne Funkenstrecken für Wechselspannungsnetze

Parafoudres - Partie 4: Parafoudres à oxyde métallique sans éclateur pour réseaux à courant alternatif

L'IEC 60099-4:2014 s'applique aux parafoudres à résistance variable à oxyde métallique sans éclateur conçus pour limiter les surtensions sur les circuits d'alimentation à courant alternatif avec Us supérieure à 1 kV. Cette troisième édition annule et remplace la deuxième édition parue en 2009. Cette édition constitue une révision technique. Les nombreux changements entre les deuxième et troisième éditions sont répertoriés dans l'avant-propos du document.
Mots clés: essais des parafoudres sans éclateur à oxyde métallique utilisés sur les réseaux de puissance en courant alternatif

Prenapetostni odvodniki - 4. del: Kovinskooksidni prenapetostni odvodniki brez iskrišč za sisteme z izmenično napetostjo (IEC 60099-4:2014)

Standard EN IEC 60099-4 se uporablja za kovinskooksidne prenapetostne odvodnike z nelinearnimi upori brez iskrišč za omejevanje valovnih napetostnih udarov v izmeničnih močnostnih tokokrogih z Us nad 1 kV.

General Information

Status
Published In Translation
Publication Date
22-Oct-2014
ICS
29.240.10 - Substations. Surge arresters
Technical Committee
POD - Surge aresters
Current Stage
6100 - Translation of adopted SIST standards (Adopted Project)
Start Date
28-Sep-2023
Due Date
26-Sep-2024
Ref Project
EN 60099-4:2014 - Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

Relations

Replaces
SIST EN 60099-4:2005/A2:2009 - Surge arresters -- Part 4: Metal-oxide surge arresters without gaps for a.c. systems
Effective Date
01-Nov-2014
Replaces
SIST EN 60099-4:2005/A1:2007 - Surge arresters -- Part 4: Metal-oxide surge arresters without gaps for a.c. systems
Effective Date
01-Nov-2014
Replaces
SIST EN 60099-4:2005 - Surge arresters -- Part 4: Metal-oxide surge arresters without gaps for a.c. systems
Effective Date
01-Nov-2014

Buy Standard

EN 60099-4:2014EN 60099-4:2014
PreviousNext
Standard
EN 60099-4:2014
English language
172 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60099-4:2014
01-november-2014
1DGRPHãþD
SIST EN 60099-4:2005
SIST EN 60099-4:2005/A1:2007
SIST EN 60099-4:2005/A2:2009
3UHQDSHWRVWQLRGYRGQLNLGHO.RYLQVNRRNVLGQLSUHQDSHWRVWQLRGYRGQLNLEUH]
LVNULãþ]DVLVWHPH]L]PHQLþQRQDSHWRVWMR ,(&
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
Ta slovenski standard je istoveten z: EN 60099-4:2014
ICS:
29.240.10 Transformatorske postaje. Substations. Surge arresters
Prenapetostni odvodniki
SIST EN 60099-4:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60099-4:2014

---------------------- Page: 2 ----------------------

SIST EN 60099-4:2014


EUROPEAN STANDARD EN 60099-4

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2014
ICS 29.240.10; 29.120.50 Supersedes EN 60099-4:2004
English Version
Surge arresters - Part 4: Metal-oxide surge arresters without
gaps for a.c. systems
(IEC 60099-4:2014)
Parafoudres - Partie 4: Parafoudres à oxyde métallique Überspannungsableiter - Teil 4: Metalloxidableiter ohne
sans éclateur pour réseaux à courant alternatif Funkenstrecken für Wechselspannungsnetze
(CEI 60099-4:2014) (IEC 60099-4:2014)
This European Standard was approved by CENELEC on 2014-08-04. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60099-4:2014 E

---------------------- Page: 3 ----------------------

SIST EN 60099-4:2014
EN 60099-4:2014 - 2 -
Foreword
The text of document 37/416/FDIS, future edition 3 of IEC 60099-4, prepared by IEC/TC 37 "Surge
arresters" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60099-4:2014.
The following dates are fixed:
– latest date by which the document has to be implemented at (dop) 2015-05-04
national level by publication of an identical national
standard or by endorsement
– latest date by which the national standards conflicting with (dow) 2017-08-04
the document have to be withdrawn

This document supersedes EN 60099-4:2004.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60099-4:2014 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-2-17 NOTE Harmonized as EN 60068-2-17.
IEC 60099-1 NOTE Harmonized as EN 60099-1.
IEC 60099-5:2013 NOTE Harmonized as EN 60099-5:2013 (not modified).
IEC 60721-3-2 NOTE Harmonized as EN 60721-3-2.
IEC 62271-202:2006 NOTE Harmonized as EN 62271-202:2007 (not modified).
ISO 3274 NOTE Harmonized as EN ISO 3274.

---------------------- Page: 4 ----------------------

SIST EN 60099-4:2014
- 3 - EN 60099-4:2014
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relev
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST IEC 61643-12:2023(Main)
Low-voltage surge protective devices - Part 12: Surge protective devices connected to low-voltage power systems - Selection and application principles (IEC 61643-12:2020)
IEC 61643-12:2020

IEC 61643-12:2020 describes the principles for the selection, operation, location and coordination of SPDs to be connected to 50/60 Hz AC power circuits, and equipment rated up to 1 000 V RMS. These devices contain at least one non-linear component and are intended to limit surge voltages and divert surge currents.
NOTE 1 Additional requirements for special applications are also applicable, If required.
NOTE 2 IEC 60364 and IEC 62305-4 are also applicable.
NOTE 3 This standard deal only with SPDs and not with surge protection components (SPC) integrated inside equipment.
This third edition cancels and replaces the second edition published in 2008. This edition constitutes a technical revision.
NOTE The following differing practice of a less permanent nature exists in the USA: In the USA, SPDs tested to Class I tests are not required. This exception applies to the entire document. This edition includes the following significant technical changes with respect to the previous edition:
a) Scope: Deleted reference to 1 500 V dc
b) Added or revised some definitions
c) Added new clause 4 on Need for protection
d) Added new information on disconnecting devices
e) Revised Characteristics of SPD
f) Revised List of parameters for SPD selection
g) Added new information on Measured Limiting Voltage
e) Added or revised some Annexes

  • Standard
    207 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    433 pages
    English and French language
    sale 15% off
SIST
SIST EN 61643-31:2019/AC:2022(Corrigendum)
Low-voltage surge protective devices - Part 31: Requirements and test methods for SPDs for photovoltaic installations
EN 61643-31:2019/AC:2022-07

IEC Corrected version

  • Corrigendum
    4 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61643-352:2018(Main)
Components for low-voltage surge protection - Part 352: Selection and application principles for telecommunications and signalling network surge isolation transformers (SIT)
EN IEC 61643-352:2018

This part of IEC 61643 covers the application of surge isolation transformers (SITs) that are
used in telecommunication transformer applications with signal levels up to 400 V peak to
peak. These transformers have a high rated impulse voltage with or without screen between
the input and output windings. SITs are components for surge protection and are used to
mitigate the onward propagation of common-mode voltage surges. This document describes
SITs' selection, application principles and related information. This document does not cover
power line communication transformers.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60099-5:2018(Main)
Surge arresters - Part 5: Selection and application recommendations
EN IEC 60099-5:2018

This part of IEC 60099 provides information, guidance, and recommendations for the
selection and application of surge arresters to be used in three-phase systems with nominal
voltages above 1 kV. It applies to gapless metal-oxide surge arresters as defined in
IEC 60099-4, to surge arresters containing both series and parallel gapped structure – rated
52 kV and less as defined in IEC 60099-6 and metal-oxide surge arresters with external series
gap for overhead transmission and distribution lines (EGLA) as defined in IEC 60099-8. In
Annex J, some aspects regarding the old type of SiC gapped arresters are discussed.
Surge arrester residual voltage is a major parameter to which most users have paid a lot of
attention to when selecting the type and rating. Typical maximum residual voltages are given
in Annex F. It is likely, however, that for some systems, or in some countries, the
requirements on system reliability and design are sufficiently uniform, so that the
recommendations of the present standard may lead to the definition of narrow ranges of
arresters. The user of surge arresters will, in that case, not be required to apply the whole
process introduced here to any new installation and the selection of characteristics resulting
from prior practice may be continued.
Annexes H and I present comparisons and calculations between old line discharge
classification and new charge classification.

  • Standard
    193 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61643-11:2012/A11:2018(Amendment)
Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods
EN 61643-11:2012/A11:2018

To add an annex for portable SPDs for household and similar use.
This annex will contain the following specific requirements to ensure the requested level of intrinsic safety for such products, i.e. product tests and safety cannot rely on any external means:
- The position of the disconnector(s) : internal, i.e. all tests shall be made and passed without the help of any external means,
- Additional specifications for tests taking into account that line and neutral terminals can be reversed,
- Specific requirements and tests for surge protective components used with such SPDs

  • Addendum – translation
    7 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60099-8:2018(Main)
Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
EN IEC 60099-8:2018

This part of IEC 60099 covers metal-oxide surge arresters with external series gap (externally
gapped line arresters (EGLA)) that are applied on overhead transmission and distribution
lines, only to protect insulator assemblies from lightning-caused flashovers.
This document defines surge arresters to protect the insulator assembly from lightning-caused
over-voltages only. Therefore, and since metal-oxide resistors are not permanently connected
to the line, the following items are not considered for this document:
• switching impulse spark-over voltage;
• residual voltage at steep current and switching current impulse;
• thermal stability;
• long-duration current impulse withstand duty;
• power-frequency voltage versus time characteristics of an arrester;
• disconnector test;
• aging duties by power-frequency voltage.
Considering the particular design concept and the special application on overhead
transmission and distribution lines, some unique requirements and tests are introduced, such
as the verification test for coordination between insulator withstand and EGLA protective
level, the follow current interrupting test, mechanical load tests, etc.
Designs with the EGLA's external series gap installed in parallel to an insulator are not
covered by this document.

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61643-351:2017(Main)
Components for lowvoltage surge protective devices - Part 351: Performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT)
EN 61643-351:2017

Surge isolation transformers (SITs) are used for signal transformer applications with signal
levels up to 400 V peak to peak. SITs are transformers, with or without an internal-winding
screen, with a rated impulse withstand voltage greater than the peak voltage of the expected
common-mode surge environment. SITs are applicable to components for surge protection
against indirect and direct effects of lightning or other transient overvoltage. SITs are used to
mitigate the onward propagation of common-mode voltage surges. This part of IEC 61643
defines test circuits and test methods for determining and verifying the SIT surge parameters.
Preferred performance values for key parameters are given.
This part of IEC 61643 does not cover SIT operation under differential-mode lightning surge
conditions.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC/TS 61643-22:2016(Main)
Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principles
CLC/TS 61643-22:2016

IEC 61643-22:2015 describes the principles for the selection, operation, location and coordination of SPDs connected to telecommunication and signalling networks with nominal system voltages up to 1 000 V r.m.s. a.c. and 1 500 V d.c. This standard also addresses SPDs that incorporate protection for signalling lines and power lines in the same enclosure (so called multiservice SPDs). This second edition cancels and replaces the first edition published in 2004. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- Update the use of multiservice SPDs (Article 8);
- Comparison between SPD classification of IEC 61643-11 and IEC 61643-21 (7.3.3);
- Consideration of new transmission systems as PoE (Annex F);
- EMC requirements of SPDs (Annex G);
- Maintenance cycles of SPDs (Annex I).
Keywords: SPD, surge protective devices

  • Technical specification
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60099-9:2014(Main)
Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations
EN 60099-9:2014

EN IEC 60099-9 applies to non-linear metal-oxide resistor type surge arresters without spark gaps designed to limit overvoltages in HVDC converter stations of two terminal, multiterminal and back-to-back type up to and including an operating voltage of 1 100 kV. The standard applies in general to porcelain-housed and polymer-housed type arresters but also to gas-insulated metal enclosed arresters (GIS-arresters) solely used as d.c. bus and d.c. line/cable arresters. Arresters for voltage source converters are not covered. Arresters applied on the a.c. systems at the converter station and subjected to power-frequency voltage of 50 or 60 Hz principally without harmonics are tested as per IEC 60099-4. The arresters on a.c.-filters are tested according to this standard.

  • Standard
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61643-21:2002/A2:2014(Amendment)
Low voltage surge protective devices – Part 21: Surge protective devices connected to telecommunications and signalling networks – Performance requirements and testing methods
EN 61643-21:2001/A2:2013

Is applicable to devices for surge protection of telecommunications and signalling etworks against indirect and direct effects of lightning or other transient overvoltages.

  • Amendment
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day