SIST EN 62394:2014

Oznaka standarda: SIST EN 62394:2014
Koda projekta: 24333
Organizacija: SIST
Naslov (angleški): Service diagnostic interface for consumer electronics products and networks - Implementation for ECHONET
Naslov (slovenski): Servisni diagnostični vmesnik za izdelke široke potrošnje in omrežja - Uporaba za ECHONET
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 10% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 62394:2014 angleški jezik Active SIST-T: 181.50 EUR
PDF
Papir
Tehnični odbor: AVM - Avdio, video in večpredstavitveni sistemi ter njihova oprema
ICS: 35.110
Status: Objavljen
Objavljen: 01-apr-2014
Refer. št. objave: Sporocila 2014-04
Referenčna oznaka: EN 62394:2014
Področje projekta (angleško): This International Standard specifies requirements for service diagnostic software to be implemented in products that incorporate a digital interface. It does not specify requirements for carrying out remote diagnosis or for manufacturer-dependent software. The SDI (Service Diagnostic Interface) requires an external controller (exclusive or general-purpose/PC) into which service diagnostic software can be loaded. Part of the controller software should be standardized while another part of this controller software should be unique to the manufacturer. To reach a common approach in servicing all products from all manufacturers, it is necessary to standardize specific items to be tested in products and in controllers’ diagnostic software. The SDI is based upon the ECHONET specification version 2.11, ECHONET Lite specification version 1.01 and APPENDIX Detailed Requirements for ECHONET Device objects Release B because this interface will be used in future products. The use of this connection and existing communication protocols enable implementation in products at low cost, with maximum flexibility and efficiency. The SDI consists of • specific hardware and software requirements of the device under test (DUT); • specific requirements of the controller: – the service software; – an ECHONET interface; • the connection between the controller and the DUT. This standard provides the minimal requirements necessary to carry out computerized diagnosis. It covers the standardized software of the controller as well as the standardized software and provisions in the DUT.

Najbolje prodajani standardi