SIST EN 62457:2008

SLOVENSKI STANDARD
SIST EN 62457:2008
01-junij-2008
.RPXQLNDFLMVNLSURWRNRO]DGRPDþHRPUHåMHSUHN,3]DYHþSUHGVWDYQRVWQH
JRVSRGLQMVNHDSDUDWH,(&
Home network communication protocol over IP for multimedia household appliances
(IEC 62457:2007)
Heimnetzwerk-Kommunikationsprotokoll über IP für Multimedia-Haushaltsgeräte (IEC
62457:2007)
Réseaux résidentiels multimédia - Protocole de communication de réseau résidentiel sur
IP destiné aux appareils domestiques multimédia (CEI 62457:2007)
Ta slovenski standard je istoveten z: EN 62457:2008
ICS:
35.110 Omreževanje Networking
35.240.99 8SRUDEQLãNHUHãLWYH,7QD IT applications in other fields
GUXJLKSRGURþMLK
SIST EN 62457:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 62457

NORME EUROPÉENNE
March 2008
EUROPÄISCHE NORM

ICS 33.040; 33.160.01


English version


Multimedia home networks -
Home network communication protocol over IP
for multimedia household appliances
(IEC 62457:2007)


Réseaux résidentiels multimédia -  Multimedia-Heimnetzwerke -
Protocole de communication Heimnetzwerk-Kommunikationsprotokoll
de réseau résidentiel sur IP destiné über IP für Multimedia-Haushaltsgeräte
aux appareils domestiques multimédia (IEC 62457:2007)
(CEI 62457:2007)




This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in two official versions (English and German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62457:2008 E

---------------------- Page: 2 ----------------------

EN 62457:2008 - 2 -
Foreword
The text of document 100/1197/CDV, future edition 1 of IEC 62457, prepared by technical area 9: Audio,
video and multimedia applications for end-user network, of IEC TC 100, Audio, video and multimedia
systems and equipment, was submitted to the IEC-CENELEC parallel Unique Acceptance Procedure and
was approved by CENELEC as EN 62457 on 2008-02-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2008-11-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2011-02-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62457:2007 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 62457:2008
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEEE Std 802.15.1 2005 IEEE Standard for Information technology - - -
Telecommunications and information
exchange between systems - Local and
metropolitan area networks - Specific
requirements -
Part 15.1: Wireless medium access control
(MAC) and physical layer (PHY) specifications
for wireless personal area networks (WPANs)

---------------------- Page: 4 ----------------------

IEC 62457
Edition 1.0 2007-09
INTERNATIONAL
STANDARD

Multimedia home networks – Home network communication protocol over IP for
multimedia household appliances


INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XB
ICS 33.040; 33.160.01 ISBN 2-8318-9306-2

---------------------- Page: 5 ----------------------

– 2 – 62457 © IEC:2007(E)

CONTENTS
FOREWORD.6
INTRODUCTION.8

1 Scope.10
2 Normative reference .11
3 Terms, definitions and abbreviations .11
3.1 Terms and definitions .11
3.2 Abbreviations .15
4 TCP/IP interface and requirements .15
4.1 Overview .15
4.2 Topology .16
4.3 UDP interface.19
4.4 Packet format of Home Network frame .19
4.4.1 General .19
4.4.2 Home Network transmission frame transfer .21
4.4.3 MAC/IP address resolution request/response .22
4.4.4 IP/MAC address resolution request/response .23
4.4.5 Hardware/MAC address resolution request/response.24
4.4.6 MAC address initialization request/response .25
4.4.7 MAC address server initialization response/MAC address allocation
response .26
4.4.8 MAC address confirmation request/response.27
4.4.9 MAC address request to all nodes/response .28
4.4.10 MAC address server detection request/response, MAC address
server notification .29
4.4.11 Network control message (destination invalid) .30
4.4.12 Network control message (NMa overlap) .31
4.5 Basic communication sequences .32
4.5.1 General .32
4.5.2 MAC/IP address resolution request/response (resolution of the NMa
into the IP address) .32
4.5.3 IP/MAC address resolution request/response (resolution of IP
address into NMa) .33
4.5.4 Hardware/MAC address resolution request/response.35
4.5.5 MAC address request/response to all nodes .36
4.5.6 Network control message (destination invalid) .37
4.5.7 Special case pertaining to packets with invalid destination values .38
4.5.8 Network control message (NMa overlap) .39
4.6 NMa acquisition booting sequence .40
4.6.1 Overview of NMa acquisition booting sequence .40
4.6.2 Overview of the processing after acquisition of IP Address .40
4.6.3 Booting node .41
4.6.4 MAC address server .45
4.6.5 Operating nodes .45
4.7 MAC address server.47
4.7.1 Requirement of MAC address server .47
4.7.2 Processing sequence for MAC address server booting .47

---------------------- Page: 6 ----------------------

62457 © IEC:2007(E) – 3 –
4.7.3 Processing by operating MAC address server.48
4.8 Time period parameters .50
4.9 Provision for updating data after NMa acquisition .51
5 TCP/IP and requirements .51
5.1 IP .51
5.1.1 Protocols to be used.51
5.1.2 IP Address.51
5.1.3 Multicast address .51
5.1.4 DHCP .51
5.1.5 Method for obtaining IP Address by manual setting, etc.52
5.1.6 Routing.52
5.2 UDP .52
5.2.1 Protocols to be used.52
5.2.2 Port Number .52
6 Lower-layer medium-specific interface and requirements.52
6.1 Interface and requirements on lower-layer medium.52
6.2 Software internal status transition .52
6.2.1 Overview .52
6.2.2 Stop status .54
6.2.3 Cold start status .54
6.2.4 Warm start status .55
6.2.5 Communication suspension status.55
6.2.6 Normal operation status.56
6.2.7 Error stop status.57
6.2.8 Temporary stop status .58

Annex A (informative) Basic booting sequence .59
Annex B (informative) Basic MAC address server booting sequence.66
Annex C (normative) Requirements on IEEE 802.15.1 .68

Bibliography.74

Figure 1 – Grouping of relationship between household appliances and audiovisual
equipment, PCs and PC-related equipment.9
Figure 2 – Examples of data communication between household appliance and
audiovisual equipment, PCs and PC-related equipment .9
Figure 3 – The composition of the Home Network layer and the specified portions.10
Figure 4 – Encapsulation of Home Network frame.16
Figure 5 – Example of a subnet using Layer 2 bridges .17
Figure 6 – Example of a subnet connection using Home Network routers.17
Figure 7 – Relationship between IP subnet and Home Network subnet .18
Figure 8 – Home Network frame packet format .19
Figure 9 – Notation for bits in the flag field.21
Figure 10 – IEEE 802.15.1 Address described in bits.21
Figure 11 – Basic MAC/IP address resolution sequence .33
Figure 12 – Basic IP/MAC address resolution sequence .34

---------------------- Page: 7 ----------------------

– 4 – 62457 © IEC:2007(E)

Figure 13 – Basic Hardware/MAC address resolution sequence.35
Figure 14 – Basic “MAC address request/response to all nodes" sequence.37
Figure 15 – Basic “destination invalid” processing sequence.38
Figure 16 – Basic sequence for handling detected NMa overlap .39
Figure 17 – Flowchart for determining provisional NMa to be used.42
Figure 18 – Check for NMas in use by other nodes .43
Figure 19 – Example of duplicated provisional NMa .44
Figure 20 – Format for UsedMAC.46
Figure 21 – Example of UsedMAC .46
Figure 22 – Internal software status transitions .53
Figure A.1 – A-MODE booting, NMas not retained (with MAC address server) .60
Figure A.2 – SR-MODE booting, NMas not retained (with MAC address server).61
Figure A.3 – A-MODE booting, NMas not retained (without MAC address server) .62
Figure A.4 – SR-MODE booting, NMas not retained (without MAC address server) .63
Figure A.5 – A-MODE booting, NMas retained (with MAC address server) .64
Figure A.6 – A-MODE booting, NMas retained (without MAC address server) .65
Figure B.1 – Booting of a single MAC address server .66
Figure B.2 – Near-simultaneous booting of two or more MAC address servers.67
Figure C.1 – Layer structure .68
Figure C.2 – Basic form of subnet.69
Figure C.3 – Example of a subnet connection using Home Network routers .69
Figure C.4 – Example of an unacceptable subnet connection (scatternet).70
Figure C.5 – Example of a connection using a home network gateway.70
Figure C.6 – Example of a subnet using Layer 2 bridges.71
Figure C.7 – Examples of Home Network communication software implementation.72
Figure C.8 – Packet structure .73

Table 1 – Packet type numbers of the Home Network frame .20
Table 2 – Hardware type.20
Table 3 – Format for “Home Network transmission frame transfer” packets.22
Table 4 – Format for “MAC/IP address resolution request” packets .22
Table 5 – Format for “MAC/IP address resolution response” packets .23
Table 6 – Format for “IP/MAC address resolution request” packets .23
Table 7 – Format for “IP/MAC address resolution response” packets .24
Table 8 – Format for “hardware/MAC address resolution request” packets.24
Table 9 – Format for “hardware/MAC address resolution response” packets .25
Table 10 – Format for “MAC address initialization request” packets .26
Table 11 – Format for “MAC address initialization response” packets .26
Table 12 – Format for “MAC address server initialization response” packets.27
Table 13 – Format for “MAC address allocation response” packets .27
Table 14 – Format for “MAC address confirmation request” packets .28
Table 15 – Format for “MAC address confirmation response” packets.28
Table 16 – Format for “ MAC address request to all nodes” packets.28

---------------------- Page: 8 ----------------------

62457 © IEC:2007(E) – 5 –
Table 17 – Format for “MAC address response to all nodes” packets .29
Table 18 – Format for “MAC address server detection request” packets.29
Table 19 – Format for “MAC address server notification” packets.30
Table 20 – Format for “MAC address server detection response” packets .30
Table 21 – Format for “network control message (destination invalid)” packets .31
Table 22 – Format for “NMa overlap” network control message packets.31
Table 23 – Address Relation table .32
Table 24 – Booting modes .40
Table 25 – Sample for storing allocated NMas .48
Table 26 – Time period parameters.50

---------------------- Page: 9 ----------------------

– 6 – 62457 © IEC:2007(E)

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

MULTIMEDIA HOME NETWORKS –
HOME NETWORK COMMUNICATION PROTOCOL
OVER IP FOR MULTIMEDIA HOUSEHOLD APPLIANCES


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62457 has been prepared by technical area 9: Audio, video and
multimedia applications for end-user network, of IEC technical committee 100: Audio, video
and multimedia systems and equipment.
The text of this standard is based on the following documents:
CDV Report on voting
100/1197/CDV 100/1271/RVC

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------------------- Page: 10 ----------------------

62457 © IEC:2007(E) – 7 –
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 11 ----------------------

– 8 – 62457 © IEC:2007(E)

INTRODUCTION
By enabling standalone-type household appliances (household appliances other than
audiovisual equipment, PCs and PC-related equipment) such as white appliances (e.g. air
conditioners, refrigerators), sensors, health, exercise and fitness equipment to connect to and
work in conjunction with audiovisual equipment, PCs and/or PC-related equipment, it
becomes possible to deliver multimedia application services, such as displaying a “washing
completed” message of a washing machine on a TV screen or operating an air conditioner via
a TV screen, that otherwise would not be possible (see Figure 1).
To achieve these services, a home network standard for networks of standalone-type
household appliances and network standards for audiovisual equipment, PCs and PC-related
equipment are needed. It is also necessary to establish a system that allows equipment
belonging to a network to exchange data with other equipment of different types of networks.
A commonly used approach to allow networks of different types to exchange data with each
other is to use Gateways.
Because data transferred within, into and out of networks of standalone-type household
appliances are control data, which are much smaller in volume than data similarly transferred
for networks of audiovisual equipment, PCs and PC-related equipment, and because
standalone-type household appliances have longer service lives than audiovisual equipment,
PCs and PC-related equipment, home network standards for networks of standalone-type
household appliances have been established separately from network standards for
audiovisual equipment, PCs and PC-related equipment, and many different protocol standards
1)
have been in use for a long time in different countries .
On the other hand, recent advances in device and software technology have made it possible
to implement TCP/IP (which has been adopted worldwide for audiovisual equipment, PCs and
PC-related equipment) in certain standalone-type household appliances, and so establishing
a home network standard for networks of standalone-type household appliances in the form of
a standard for layers above TCP/IP would allow data to be directly exchanged between
household appliances and audiovisual equipment, PCs and PC-related equipment via TCP/IP
(see Figure 2 example1, example2). In turn, this would allow the creation of multimedia
application services that enable household appliances to work in conjunction with audiovisual
equipment, PCs and PC-related equipment.
The advantages of applying this standard are:
• it can be applied to many types of Home Network standards.
• both Home Network nodes with TCP/IP Layer and without can coexist under the same
Home Network middleware.
• Household appliances can communicate with audiovisual equipment, PCs and PC-related
equipment, and vice versa, without requiring any gateway.
• Household appliances can handle text and audiovisual data.
• Audiovisual equipment, PCs and PC-related equipment can handle Household appliances
data.
• Household appliances can freely select a suitable lower-layer medium from various lower-
layer media below TCP/IP.

—————————
1
 CEBus, ECHONET, Konnex, LonTalk, others.

---------------------- Page: 12 ----------------------

62457 © IEC:2007(E) – 9 –
Network for audiovisual equipment


Digital TVs
Operating household appliances via a TV screen
HDD recorders
and displaying the operation status of household
appliances on a TV screen

Network for PCs and
PC-related equipment

AAiirrccoonn

PC
PC


PDA CCeelllluullaarr pphhoonneess
  WWaasshhiinngg  EElleeccttrriicc
FFrriiddggee
mmaacchhiinnee oovveenn

Operating household appliances by means of
a cellular phone or PC on the premises and
Network for household appliances
displaying the operation status of a household

appliances on a cellular phone or PC screen
on the premises
Figure 1 – Grouping of relationship between household appliances and audiovisual
equipment, PCs and PC-related equipment
Audiovisual equipment, PCs and

Household appliance
Middleware for PC-related equipment

Middleware for
Home Network
AV,PC equipment
AV, PC equipment
Middleware for
Network
Network
household appliances

System
http
http
example1

TCP/IP Layer
TCP/IP Layer
TCP/IP Layer
Lower Media Layer
Lower Media Layer


Audiovisual equipment, PCs and
Household appliance
PC-related equipment


Middleware for
Home Network
Home Network
AV, PC equipment
Middleware for
Middleware for
household appliances
Network
household applian
...