SIST EN 847-1:2005

Oznaka standarda: SIST EN 847-1:2005
Koda projekta: 00142041
Organizacija: SIST
Naslov (angleški): Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades
Naslov (slovenski): Orodje za obdelavo lesa – Varnostne zahteve – 1. del: Frezalno orodje, listi krožnih žag
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 20% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 847-1:2005 angleški jezik Withdrawn SIST-H: 71.50 EUR
PDF
Papir
Tehnični odbor: VSN - Varnost strojev in naprav
ICS: 25.100.20 25.100.40 79.120.20
Status: Razveljavljen
Objavljen: 01-sep-2005
Refer. št. objave: Sporocila 2005-09-01
Razveljavitev: 01-mar-2009
Referenca razveljavitve: Sporočila 2009-03
Področje projekta (angleško): This document specifies all hazards arising from the design of tools for woodworking machines, and describes the methods for the elimination or reduction of these hazards by tool design and by the provision of information. This document deals with milling tools (bore mounted, shank mounted, integrated spindle) and circular saw blades, but does not cover any hazard related to the strength of shank of shank mounted milling tools. The hazards are listed in Clause 5. This document does not apply to boring bits, eccentric single router cutters, cutters with cutting circle less than 16 mm and to tools used in rotary knife lathes and copying lathes where the hazard of ejection and contact with the tool is always prevented by a system of fixed guards and/or movable guards interlocked with guard-locking and/or self-closing guards.
Povezava na standarde
Povezava Ime Datum
Konsolidiran z SIST EN 847-1:2005+A1:2007 - Orodje za obdelavo lesa - Varnostne zahteve - 1. del: Frezalno orodje, listi krožnih žag 01-nov-2007
Nadomešča SIST EN 847-1:2000 - Orodje za obdelavo lesa - Varnostne zahteve - 1. del: Frezalno orodje in listi krožnih žag 01-sep-2005
Nadomešča SIST EN 847-1:2000/AC:2000 - Tools for woodworking - Safety requirements - Part 1: Milling tools and circular saw blades 01-sep-2005


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi