Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP); Multimedia Messaging Service (MMS) with specific provision for facsimile services (service type F, class 2)

A standard profile ensuring inter-operability between non-voice DECT equipment offering specific telematic services, including facsimile and requiring roaming mobility.

Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Profil podatkovnih storitev (DSP) - Storitev večpredstavnostnega sporočanja s posebno pripravo za faksimile storitev (storitev tipa F, razred 2)

General Information

Status
Published
Publication Date
31-Aug-2001
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2001
Due Date
01-Sep-2001
Completion Date
01-Sep-2001

Buy Standard

Standard
P ETS 300 755:2001
English language
165 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ETS 300 755:2001
English language
165 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP); Multimedia Messaging Service (MMS) with specific provision for facsimile services (service type F, class 2)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:ETS 300 755 Edition 13SIST ETS 300 755:2001en01-IHEUXDU-20013SIST ETS 300 755:2001SLOVENSKI
STANDARD



SIST ETS 300 755:2001



EUROPEANETS 300 755TELECOMMUNICATIONMay 1997STANDARDSource: ETSI EP-DECTReference: DE/DECT-020038ICS:33.020Key words:Data, DECT, facsimile, mobility, profile, radioDigital Enhanced Cordless Telecommunications (DECT);Data Services Profile (DSP);Multimedia Messaging Service (MMS) with specificprovision for facsimile services;(Service type F, class 2)ETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.frTel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1997. All rights reserved.SIST ETS 300 755:2001



Page 2ETS 300 755: May 1997Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 755:2001



Page 3ETS 300 755: May 1997ContentsForeword.91Scope.112Normative references.113Definitions and abbreviations.133.1Definitions.133.2Abbreviations.144Description of services.164.1Reference configuration.164.2Service description.164.3Service objectives.174.3.1Multi-bearer support.175Functional description.185.1General.185.2MMS relations to outside networks (horizontal model).185.3Architecture.195.3.1General.195.3.2MMSP call control part (C-MMS).205.3.3MMSP messaging part (M-MMS).205.4MMS relations to the upper/lower layers (vertical model).205.4.1General.205.4.2MMS relation to the DECT upper layers.215.4.2.1General.215.4.2.2M-MMS.215.4.2.3C-MMS.215.5MMS relations to outside networks (vertical and horizontal model).225.5.1General.225.5.2Phases of the horizontal interactions.225.5.2.1General.225.5.2.2PP originated outgoing MMS call.225.5.2.3Example of a typical PP initiated message.245.5.2.4PP terminated incoming MMS call.245.6MMS relations to the DECT Data Services Profiles (DSPs) E and F.255.6.1General.255.6.2E-profile and MMSP.255.6.3F-profile and MMSP.256Physical layer requirements.257MAC layer requirements.258DLC layer requirements.268.1C-plane requirements.268.2U-plane requirements.269Network layer requirements.2610Management entity requirements.2711Generic interworking conventions.2711.1MMSP procedures.2711.2MMS-SAP.27SIST ETS 300 755:2001



Page 4ETS 300 755: May 199711.3MMSP primitives.2711.3.1C-MMS primitives.2711.3.2M-MMS primitives.2811.3.3Parameters.28Annex A (normative):MMSP definition.29A.1MMSP protocol messages and procedures.29A.1.1General.29A.1.2C-MMS messages and procedures.29A.1.3M-MMS.30A.1.3.1Summary of the M-MMS messages.30A.1.3.2MMS SEND procedure.30A.1.3.2.1{MMS-SEND} message contents.31A.1.3.2.2{MMS-SEND-RPY} message contents.31A.1.3.3MMS SEND-REQ procedure.32A.1.3.3.1{MMS-SEND-REQ} message contents.32A.1.3.3.2{MMS-SEND-RPY} message contents.33A.1.3.4MMS RETRIEVE procedure.33A.1.3.4.1{MMS-RETRIEVE} message contents.34A.1.3.4.2{MMS-RETRIEVE-RPY} message contents.34A.1.3.5MMS RETRIEVE-HDR procedure.35A.1.3.5.1{MMS-RETRIEVE-HDR} message contents.35A.1.3.5.2MMS-RETRIEVE-RPY} message contents.36A.1.3.6MMS-EXT-CMD procedure.36A.1.3.6.1{MMS-EXT-CMD} message contents.37A.1.3.6.2{MMS-EXT-CMD-RPY} message contents.37A.1.3.7MMS-STATUS procedures.37A.1.3.7.1{MMS-STATUS} message contents.38A.1.3.7.2{MMS-STATUS-RPY} message contents.38A.1.3.8MMS-ESC-CMD procedure.39A.1.3.8.1{MMS-ESC-CMD} message contents.39A.1.3.8.2{MMS-ESC-CMD-RPY} message contents.40A.1.3.8.3Generic interworking conventions for the {MMS-ESC-CMD} command and reply.40A.1.3.9Procedures for the use of the MMS-message identifier.40A.1.3.10Multi-part message procedures.41A.1.3.10.1Multi-part send procedures.41A.1.3.10.2Multi-part retrieve procedures.42A.1.3.11Unsupported MMS command and IE compatibility procedures.42A.1.3.11.1Unsupported MMS commands procedure.42A.1.3.11.2Unsupported Information elements procedure.42A.2MMSP information elements.42A.2.1Summary of M-MMSP information elements.42A.3Parameters of M-MMSP service primitives.43A.3.1M_MMS_SEND- {req, ind}.43A.3.2M_MMS_SEND_REQ- {req, ind}.44A.3.3M_MMS_SEND_RPY- {req, ind}.44A.3.4M_MMS_RETRIEVE- {req, ind}.45A.3.5M_MMS_RETRIEVE_RPY- {req, ind}.45A.3.6M_MMS_EXT_CMD- {req, ind}.46A.3.7M_MMS_EXT_CMD_RPY- {req, ind}.46A.3.8M_MMS_STATUS {req, ind}.47A.3.9M_MMS_STATUS_RPY- {req, ind}.47A.3.10M_MMS_ESC_CMD- {req, ind}.48A.3.11M_MMS_ESC_CMD_RPY- {req, ind}.48Annex B (normative):Support of MMSP by the DECT lower layers.49B.1Profile-specific information elements.49B.1.1MMS Generic Header information element.49SIST ETS 300 755:2001



Page 5ETS 300 755: May 1997B.1.2MMS Object Header information element.54B.1.3MMS Extended Header information element.60B.2LAPU Frame Format applicable for the F profile.62B.2.1The information field in case of SAPI 0.62B.2.2The information field in case of SAPI 3.62B.3C-MMS primitive mapping rules.62B.4M-MMS message mapping rules.63B.4.1General.63B.4.2Information Element Mapping Rules.63Annex C (normative):Interworking conventions for real-time facsimile group 3 (MMS to T.30Group 3 interworking).64C.1Introduction and scope of annex.64C.2Definition of the services and features.64C.3Overview of the MMS requirements.66C.3.1Standardized symbols for the status columns.66C.3.2Outgoing facsimile service.67C.3.2.1C-MMS requirements.67C.3.2.2M-MMS command requirements.68C.3.2.3M-MMS information element requirements.68C.3.3Incoming facsimile service.69C.3.3.1C-MMS requirements.69C.3.3.2M-MMS command requirements.69C.3.3.3M-MMS information element requirements.69C.4M-MMS message IE requirements - Outgoing facsimile service.70C.4.1MMS-SEND command.70C.4.2MMS-SEND-REQ command.70C.4.3MMS-SEND-RPY command.71C.4.4MMS-RETRIEVE command.71C.4.5MMS-RETRIEVE-RPY command.71C.4.6MMS-EXT-CMD command.72C.4.7MMS-EXT-CMD-RPY command.72C.4.8MMS-STATUS command.73C.5M-MMS message IE requirements - Incoming facsimile service.73C.5.1MMS-SEND command.73C.5.2MMS-SEND-REQ command.74C.5.3MMS-SEND-RPY command.74C.5.4MMS-RETRIEVE command.75C.5.5MMS-RETRIEVE-RPY command.75C.5.6MMS-EXT-CMD command.76C.5.7MMS-EXT-CMD-RPY command.76C.5.8MMS-STATUS command.77C.6T.30 parameters to MMS IE mappings.77C.6.1DIS/DTC Capabilities mapping.77C.6.2DCS Capabilities mapping.79C.7Service specific Information Element codings.81C.7.1<>.81C.7.2<>.82C.7.3<>.82C.7.4<>.82C.7.5<>.83C.7.6<>.83C.7.7<>.84SIST ETS 300 755:2001



Page 6ETS 300 755: May 1997C.7.7.1Group 3 facsimile object parameters.85C.7.7.2Group 3 facsimile transmission parameters.86C.7.7.3Group 3 facsimile capabilities parameters.87C.7.7.4Group 3 facsimile Called Subscriber Identity (CSI).90C.7.8<>.91C.8Interworking procedures - outgoing facsimile service.91C.8.1General procedures.92C.8.1.1Structure of a MMS facsimile message - multipart message procedures.92C.8.1.2Assignment of MMS message identifiers.93C.8.1.3Assignment of Multipart parent message identifiers.93C.8.1.4Management of MMS message and IE options.93C.8.1.5Procedure for support of Option O.4 - T.30 Error Correction Mode (ECM).93C.8.2Call setup procedures (T.30 phase A).94C.8.2.1PP side procedures.94C.8.2.2FP side/IWU procedures.94C.8.3Service capability identification procedures (T.30 phase B.1).96C.8.3.1PP side procedures.96C.8.3.1.1Retrieval of FP and EE capabilities (Optional).96C.8.3.1.2Facsimile message to transmit.96C.8.3.1.3Facsimile message to retrieve and none to transmit(Optional).97C.8.3.1.4No facsimile message to transmit or to retrieve.97C.8.3.2FP side/IWU procedures.97C.8.3.2.1Retrieval of FP and EE capabilities.98C.8.3.2.2PP has a facsimile message to transmit.98C.8.3.2.3PP has no more facsimile messages to transmit.98C.8.3.2.4PP wishes to retrieve a facsimile message.98C.8.4Service negotiation procedures (T.30 phase B.2).99C.8.4.1PP side procedures.99C.8.4.2FP side/IWU procedures.99C.8.5Message transmission procedures (T.30 phase C).100C.8.5.1PP side procedures.100C.8.5.2FP side/IWU procedures.100C.8.6Post-message procedures (T.30 phase D).101C.8.6.1PP side procedures.101C.8.6.1.1More parts of the multi-part message to send (T.30 MPS)101C.8.6.1.2Multi-part message finished but more facsimile messagesto send (T.30 EOM).101C.8.6.1.3Finished sending all messages and message parts (T.30EOP).102C.8.6.2FP side/IWU procedures.102C.8.6.2.1More parts of the multi-part message to send (T.30 MPS)103C.8.6.2.2Multi-part message finished but more facsimile messagesto send (T.30 EOM).103C.8.6.2.3Finished sending all messages and message parts (T.30EOP).104C.8.7Call release procedures (T.30 phase E).104C.8.7.1PP side procedures.104C.8.7.2FP side/IWU procedures.104C.8.7.2.1PP initiated normal release.104C.8.7.2.2FP initiated orderly release.105C.8.7.2.3FP initiated abnormal release.105C.9Interworking procedures - incoming facsimile service.114C.9.1General procedures.114C.9.2Call setup procedures (T.30 phase A).114C.9.2.1FP side/IWU procedures.114C.9.2.2PP side procedures.115C.9.3Service capability identification procedures (T.30 phase B.1).115C.9.3.1FP side/IWU procedures.115C.9.3.1.1Retrieval of PP capabilities and transfer of PP/IWUcapabilities to the EE.116SIST ETS 300 755:2001



Page 7ETS 300 755: May 1997C.9.3.1.2Retrieval of a facsimile message by the EE.116C.9.3.2PP side procedures.117C.9.3.2.1Retrieval of PP capabilities (Optional).117C.9.3.2.2EE has no more facsimile messages to transmit.117C.9.3.2.3Retrieval of a facsimile message by the EE.117C.9.4Service negotiation procedures (T.30 phase B.2).118C.9.4.1FP side/IWU procedures.118C.9.4.2PP side procedures.119C.9.5Message transmission procedures (T.30 phase C).119C.9.5.1FP side/IWU procedures.119C.9.5.2PP side procedures.120C.9.6Post-message procedures (T.30 phase D).120C.9.6.1FP side/IWU procedures.120C.9.6.1.1More parts of the multi-part message to send (T.30 MPS)120C.9.6.1.2Multi-part message finished but more facsimile messagesto send (T.30 EOM).121C.9.6.1.3Finished sending all messages and message parts (T.30EOP).121C.9.6.2PP side procedures.122C.9.6.2.1More parts of the multi-part message to send (T.30 MPS)122C.9.6.2.2Multi-part message finished but more facsimile messagesto send (T.30 EOM).123C.9.6.2.3Finished sending all messages and message parts (T.30EOP).123C.9.7Call release procedures (T.30 phase E).124C.9.7.1FP side/IWU procedures.124C.9.7.1.1PP initiated normal release.124C.9.7.1.2EE/FP initiated orderly release.124C.9.7.1.3EE/FP initiated abnormal release.124C.9.7.2PP side procedures.124C.9.7.2.1PP initiated normal release.124C.9.7.2.2EE/FP initiated orderly release.124Annex D (informative):Interworking conventions for store and forward facsimile group 3.133Annex E (informative):Interworking conventions for the GSM facsimile group 3 service.134Annex F (normative):Service type C, class 2: Fixed termination NWK PICS proforma for E and Fprofile.135F.1Standardized symbols for the status column.135F.2Capabilities.136F.2.1Major capabilities.136F.2.1.1Services.136F.2.2.1Timer support.137Annex G (normative):Service type C, class 2: Portable termination NWK PICS proforma for E andF profiles.149G.1Standardized symbols for the status column.149G.2Capabilities.150G.2.1Major capabilities.
...

SLOVENSKI STANDARD
SIST ETS 300 755:2001
01-september-2001
'LJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH '(&7 3URILOSRGDWNRYQLK
VWRULWHY '63 6WRULWHYYHþSUHGVWDYQRVWQHJDVSRURþDQMDVSRVHEQRSULSUDYR]D
IDNVLPLOHVWRULWHY VWRULWHYWLSD)UD]UHG
Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP);
Multimedia Messaging Service (MMS) with specific provision for facsimile services
(service type F, class 2)
Ta slovenski standard je istoveten z: ETS 300 755 Edition 1
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
SIST ETS 300 755:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 755:2001

---------------------- Page: 2 ----------------------

SIST ETS 300 755:2001
EUROPEAN ETS 300 755
TELECOMMUNICATION May 1997
STANDARD
Source: ETSI EP-DECT Reference: DE/DECT-020038
ICS: 33.020
Key words: Data, DECT, facsimile, mobility, profile, radio
Digital Enhanced Cordless Telecommunications (DECT);
Data Services Profile (DSP);
Multimedia Messaging Service (MMS) with specific
provision for facsimile services;
(Service type F, class 2)
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.fr
Tel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1997. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 755:2001
Page 2
ETS 300 755: May 1997
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 755:2001
Page 3
ETS 300 755: May 1997
Contents
Foreword .9
1 Scope .11
2 Normative references.11
3 Definitions and abbreviations .13
3.1 Definitions .13
3.2 Abbreviations .14
4 Description of services .16
4.1 Reference configuration.16
4.2 Service description.16
4.3 Service objectives.17
4.3.1 Multi-bearer support .17
5 Functional description .18
5.1 General .18
5.2 MMS relations to outside networks (horizontal model) .18
5.3 Architecture.19
5.3.1 General.19
5.3.2 MMSP call control part (C-MMS).20
5.3.3 MMSP messaging part (M-MMS).20
5.4 MMS relations to the upper/lower layers (vertical model).20
5.4.1 General.20
5.4.2 MMS relation to the DECT upper layers.21
5.4.2.1 General.21
5.4.2.2 M-MMS .21
5.4.2.3 C-MMS.21
5.5 MMS relations to outside networks (vertical and horizontal model).22
5.5.1 General.22
5.5.2 Phases of the horizontal interactions .22
5.5.2.1 General.22
5.5.2.2 PP originated outgoing MMS call.22
5.5.2.3 Example of a typical PP initiated message.24
5.5.2.4 PP terminated incoming MMS call.24
5.6 MMS relations to the DECT Data Services Profiles (DSPs) E and F .25
5.6.1 General.25
5.6.2 E-profile and MMSP .25
5.6.3 F-profile and MMSP .25
6 Physical layer requirements .25
7 MAC layer requirements.25
8 DLC layer requirements .26
8.1 C-plane requirements .26
8.2 U-plane requirements .26
9 Network layer requirements .26
10 Management entity requirements.27
11 Generic interworking conventions .27
11.1 MMSP procedures .27
11.2 MMS-SAP .27

---------------------- Page: 5 ----------------------

SIST ETS 300 755:2001
Page 4
ETS 300 755: May 1997
11.3 MMSP primitives . 27
11.3.1 C-MMS primitives . 27
11.3.2 M-MMS primitives. 28
11.3.3 Parameters . 28
Annex A (normative): MMSP definition. 29
A.1 MMSP protocol messages and procedures. 29
A.1.1 General. 29
A.1.2 C-MMS messages and procedures. 29
A.1.3 M-MMS. 30
A.1.3.1 Summary of the M-MMS messages . 30
A.1.3.2 MMS SEND procedure . 30
A.1.3.2.1 {MMS-SEND} message contents. 31
A.1.3.2.2 {MMS-SEND-RPY} message contents . 31
A.1.3.3 MMS SEND-REQ procedure . 32
A.1.3.3.1 {MMS-SEND-REQ} message contents. 32
A.1.3.3.2 {MMS-SEND-RPY} message contents . 33
A.1.3.4 MMS RETRIEVE procedure . 33
A.1.3.4.1 {MMS-RETRIEVE} message contents. 34
A.1.3.4.2 {MMS-RETRIEVE-RPY} message contents . 34
A.1.3.5 MMS RETRIEVE-HDR procedure . 35
A.1.3.5.1 {MMS-RETRIEVE-HDR} message contents. 35
A.1.3.5.2 MMS-RETRIEVE-RPY} message contents . 36
A.1.3.6 MMS-EXT-CMD procedure . 36
A.1.3.6.1 {MMS-EXT-CMD} message contents . 37
A.1.3.6.2 {MMS-EXT-CMD-RPY} message contents. 37
A.1.3.7 MMS-STATUS procedures. 37
A.1.3.7.1 {MMS-STATUS} message contents . 38
A.1.3.7.2 {MMS-STATUS-RPY} message contents. 38
A.1.3.8 MMS-ESC-CMD procedure . 39
A.1.3.8.1 {MMS-ESC-CMD} message contents. 39
A.1.3.8.2 {MMS-ESC-CMD-RPY} message contents . 40
A.1.3.8.3 Generic interworking conventions for the {MMS-ESC-
CMD} command and reply . 40
A.1.3.9 Procedures for the use of the MMS-message identifier . 40
A.1.3.10 Multi-part message procedures . 41
A.1.3.10.1 Multi-part send procedures . 41
A.1.3.10.2 Multi-part retrieve procedures . 42
A.1.3.11 Unsupported MMS command and IE compatibility procedures. 42
A.1.3.11.1 Unsupported MMS commands procedure . 42
A.1.3.11.2 Unsupported Information elements procedure . 42
A.2 MMSP information elements . 42
A.2.1 Summary of M-MMSP information elements . 42
A.3 Parameters of M-MMSP service primitives .43
A.3.1 M_MMS_SEND- {req, ind} . 43
A.3.2 M_MMS_SEND_REQ- {req, ind}. 44
A.3.3 M_MMS_SEND_RPY- {req, ind}. 44
A.3.4 M_MMS_RETRIEVE- {req, ind} . 45
A.3.5 M_MMS_RETRIEVE_RPY- {req, ind}. 45
A.3.6 M_MMS_EXT_CMD- {req, ind} . 46
A.3.7 M_MMS_EXT_CMD_RPY- {req, ind}. 46
A.3.8 M_MMS_STATUS {req, ind} . 47
A.3.9 M_MMS_STATUS_RPY- {req, ind}. 47
A.3.10 M_MMS_ESC_CMD- {req, ind}. 48
A.3.11 M_MMS_ESC_CMD_RPY- {req, ind} . 48
Annex B (normative): Support of MMSP by the DECT lower layers. 49
B.1 Profile-specific information elements. 49
B.1.1 MMS Generic Header information element. 49

---------------------- Page: 6 ----------------------

SIST ETS 300 755:2001
Page 5
ETS 300 755: May 1997
B.1.2 MMS Object Header information element.54
B.1.3 MMS Extended Header information element.60
B.2 LAPU Frame Format applicable for the F profile.62
B.2.1 The information field in case of SAPI 0.62
B.2.2 The information field in case of SAPI 3.62
B.3 C-MMS primitive mapping rules .62
B.4 M-MMS message mapping rules .63
B.4.1 General .63
B.4.2 Information Element Mapping Rules.63
Annex C (normative): Interworking conventions for real-time facsimile group 3 (MMS to T.30
Group 3 interworking).64
C.1 Introduction and scope of annex .64
C.2 Definition of the services and features .64
C.3 Overview of the MMS requirements.66
C.3.1 Standardized symbols for the status columns .66
C.3.2 Outgoing facsimile service.67
C.3.2.1 C-MMS requirements .67
C.3.2.2 M-MMS command requirements.68
C.3.2.3 M-MMS information element requirements.68
C.3.3 Incoming facsimile service.69
C.3.3.1 C-MMS requirements .69
C.3.3.2 M-MMS command requirements.69
C.3.3.3 M-MMS information element requirements.69
C.4 M-MMS message IE requirements - Outgoing facsimile service .70
C.4.1 MMS-SEND command .70
C.4.2 MMS-SEND-REQ command .70
C.4.3 MMS-SEND-RPY command.71
C.4.4 MMS-RETRIEVE command .71
C.4.5 MMS-RETRIEVE-RPY command.71
C.4.6 MMS-EXT-CMD command.72
C.4.7 MMS-EXT-CMD-RPY command .72
C.4.8 MMS-STATUS command .73
C.5 M-MMS message IE requirements - Incoming facsimile service .73
C.5.1 MMS-SEND command .73
C.5.2 MMS-SEND-REQ command .74
C.5.3 MMS-SEND-RPY command.74
C.5.4 MMS-RETRIEVE command .75
C.5.5 MMS-RETRIEVE-RPY command.75
C.5.6 MMS-EXT-CMD command.76
C.5.7 MMS-EXT-CMD-RPY command .76
C.5.8 MMS-STATUS command .77
C.6 T.30 parameters to MMS IE mappings .77
C.6.1 DIS/DTC Capabilities mapping .77
C.6.2 DCS Capabilities mapping.79
C.7 Service specific Information Element codings.81
C.7.1 <>.81
C.7.2 <>.82
C.7.3 <>.82
C.7.4 <>.82
C.7.5 <> .83
C.7.6 <>.83
C.7.7 <>.84

---------------------- Page: 7 ----------------------

SIST ETS 300 755:2001
Page 6
ETS 300 755: May 1997
C.7.7.1 Group 3 facsimile object parameters. 85
C.7.7.2 Group 3 facsimile transmission parameters. 86
C.7.7.3 Group 3 facsimile capabilities parameters. 87
C.7.7.4 Group 3 facsimile Called Subscriber Identity (CSI) . 90
C.7.8 <> . 91
C.8 Interworking procedures - outgoing facsimile service. 91
C.8.1 General procedures . 92
C.8.1.1 Structure of a MMS facsimile message - multipart message procedures. 92
C.8.1.2 Assignment of MMS message identifiers . 93
C.8.1.3 Assignment of Multipart parent message identifiers. 93
C.8.1.4 Management of MMS message and IE options. 93
C.8.1.5 Procedure for support of Option O.4 - T.30 Error Correction Mode (ECM). 93
C.8.2 Call setup procedures (T.30 phase A) . 94
C.8.2.1 PP side procedures . 94
C.8.2.2 FP side/IWU procedures . 94
C.8.3 Service capability identification procedures (T.30 phase B.1). 96
C.8.3.1 PP side procedures . 96
C.8.3.1.1 Retrieval of FP and EE capabilities (Optional). 96
C.8.3.1.2 Facsimile message to transmit . 96
C.8.3.1.3 Facsimile message to retrieve and none to transmit
(Optional) . 97
C.8.3.1.4 No facsimile message to transmit or to retrieve. 97
C.8.3.2 FP side/IWU procedures . 97
C.8.3.2.1 Retrieval of FP and EE capabilities. 98
C.8.3.2.2 PP has a facsimile message to transmit. 98
C.8.3.2.3 PP has no more facsimile messages to transmit. 98
C.8.3.2.4 PP wishes to retrieve a facsimile message. 98
C.8.4 Service negotiation procedures (T.30 phase B.2). 99
C.8.4.1 PP side procedures . 99
C.8.4.2 FP side/IWU procedures . 99
C.8.5 Message transmission procedures (T.30 phase C) . 100
C.8.5.1 PP side procedures . 100
C.8.5.2 FP side/IWU procedures . 100
C.8.6 Post-message procedures (T.30 phase D). 101
C.8.6.1 PP side procedures . 101
C.8.6.1.1 More parts of the multi-part message to send (T.30 MPS)101
C.8.6.1.2 Multi-part message finished but more facsimile messages
to send (T.30 EOM) . 101
C.8.6.1.3 Finished sending all messages and message parts (T.30
EOP) . 102
C.8.6.2 FP side/IWU procedures . 102
C.8.6.2.1 More parts of the multi-part message to send (T.30 MPS)103
C.8.6.2.2 Multi-part message finished but more facsimile messages
to send (T.30 EOM) . 103
C.8.6.2.3 Finished sending all messages and message parts (T.30
EOP) . 104
C.8.7 Call release procedures (T.30 phase E) . 104
C.8.7.1 PP side procedures . 104
C.8.7.2 FP side/IWU procedures . 104
C.8.7.2.1 PP initiated normal release . 104
C.8.7.2.2 FP initiated orderly release . 105
C.8.7.2.3 FP initiated abnormal release . 105
C.9 Interworking procedures - incoming facsimile service. 114
C.9.1 General procedures . 114
C.9.2 Call setup procedures (T.30 phase A) . 114
C.9.2.1 FP side/IWU procedures . 114
C.9.2.2 PP side procedures . 115
C.9.3 Service capability identification procedures (T.30 phase B.1). 115
C.9.3.1 FP side/IWU procedures . 115
C.9.3.1.1 Retrieval of PP capabilities and transfer of PP/IWU
capabilities to the EE. 116

---------------------- Page: 8 ----------------------

SIST ETS 300 755:2001
Page 7
ETS 300 755: May 1997
C.9.3.1.2 Retrieval of a facsimile message by the EE .116
C.9.3.2 PP side procedures.117
C.9.3.2.1 Retrieval of PP capabilities (Optional) .117
C.9.3.2.2 EE has no more facsimile messages to transmit .117
C.9.3.2.3 Retrieval of a facsimile message by the EE .117
C.9.4 Service negotiation procedures (T.30 phase B.2) .118
C.9.4.1 FP side/IWU procedures.118
C.9.4.2 PP side procedures.119
C.9.5 Message transmission procedures (T.30 phase C).119
C.9.5.1 FP side/IWU procedures.119
C.9.5.2 PP side procedures.120
C.9.6 Post-message procedures (T.30 phase D).120
C.9.6.1 FP side/IWU procedures.120
C.9.6.1.1 More parts of the multi-part message to send (T.30 MPS)120
C.9.6.1.2 Multi-part message finished but more facsimile messages
to send (T.30 EOM) .121
C.9.6.1.3 Finished sending all messages and message parts (T.30
EOP).121
C.9.6.2 PP side procedures.122
C.9.6.2.1 More parts of the multi-part message to send (T.30 MPS)122
C.9.6.2.2 Multi-part message finished but more facsimile messages
to send (T.30 EOM) .123
C.9.6.2.3 Finished sending all messages and message parts (T.30
EOP).123
C.9.7 Call release procedures (T.30 phase E).124
C.9.7.1 FP side/IWU procedures.124
C.9.7.1.1 PP initiated normal release.124
C.9.7.1.2 EE/FP initiated orderly release .124
C.9.7.1.3 EE/FP initiated abnormal release .124
C.9.7.2 PP side procedures.124
C.9.7.2.1 PP initiated normal release.124
C.9.7.2.2 EE/FP initiated orderly release .124
Annex D (informative): Interworking conventions for store and forward facsimile group 3 .133
Annex E (informa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.