Guide to EMC conformity of apparatus designed for military and other purposes

D124/093: Referred to CLC/TC 205

Giude to EMC comfomity of apparatus designed for military and other purposes

General Information

Status
Published
Publication Date
28-Feb-2003
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Mar-2003
Due Date
01-Mar-2003
Completion Date
01-Mar-2003

Relations

Buy Standard

Standardization document
R210-008:2003
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST R210-008:2003
01-marec-2003
Giude to EMC comfomity of apparatus designed for military and other purposes
Guide to EMC conformity of apparatus designed for military and other purposes
Ta slovenski standard je istoveten z: R210-008:2002
ICS:
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
95.020 Vojaška tehnika. Vojaške Military engineering. Military
zadeve. Orožje affairs. Weapons
SIST R210-008:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST R210-008:2003

---------------------- Page: 2 ----------------------

SIST R210-008:2003
CENELEC R210-008
REPORT January 2002
English Version
Guide to EMC conformity of
apparatus designed for military
and other purposes
This CENELEC Report has been prepared by TC 210, Electromagnetic compatibility (EMC). It
was approved by TC 210 on 1998-04-24 and was endorsed by the CENELEC Technical Board
on 2000-04-01.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. R210-008:2002 E

---------------------- Page: 3 ----------------------

SIST R210-008:2003
R210-008:2002 - 2 -
Foreword
This guide has been prepared by WG5 of CENELEC TC210 to determine the procedure to be applied
to dual purpose apparatus designed for military and other purposes in respect of the protection
requirements of the EMC Directive, 89/336/EEC.
Military EMC-Standards for several decades have successfully verified the compatibility of apparatus,
systems, and installations, though their test methods differ from those used in harmonised European
test standards.
This guide contains the requirements to be met by apparatus designed and manufactured for military
and other purposes to allow conformity with the EMC Directive. An example of the rationale for the
use of national military EMC standards is included in Annexe E.
This guide was approved for publication by the CENELEC Technical Board on 2000-04-01.

---------------------- Page: 4 ----------------------

SIST R210-008:2003
- 3 - R210-008:2002
Contents
Introduction .4
1 Scope .5
2 Objectives .5
3 Electromagnetic environment.5
4 Applicable EMC standards .6
4.1 Standards elaborating the essential protection requirements of the EMC
Directive .6
4.2 Applicable military standards.6
5 Factors affecting the sale of dual purpose apparatus on the European market .7
5.1 Legal position.7
5.2 Technical requirements.7
6 Requirements for dual purpose apparatus .7
6.1 General principles .7
6.2 Specific requirements .8
7 Conformity assessment procedure.8
8 Non-compliance .8
9 Reference documents.8
Annexes
A Examples of dual-purpose apparatus . 12
B Article 223 of the Treaty of Rome. 13
C Council Decision 255/58 - EC Council list of items defining the scope of Article
223 of the Treaty of Rome . 14
D Member States statement on military apparatus coming within the scope of the
EMC Directive . 16
E Example of a technical rationale - Comparison of Belgian military and European
civil Generic EMC standards. 17

---------------------- Page: 5 ----------------------

SIST R210-008:2003
R210-008:2002 - 4 -
Introduction
The EMC Directive, 89/336/EEC, amended by 92/31/EEC and 93/68/EEC, has a very wide scope and
in practice there are few exclusions from its provisions. Military apparatus used in a military
environment, or military apparatus operated for military purposes in a non-military environment, may
be excluded from the provisions of the directive under Article 223.1.b, of the Treaty establishing the
European Economic Community (Treaty of Rome). Apparatus having dual purpose i.e. as defined in
Clause 1, is considered to come within the scope of the directive and if the apparatus is placed on the
market as a single functional unit, then conformity with the essential requirements of the Directive is
necessary.
Many items of dual use apparatus may be designed and manufactured to a procurement specification
which refers to an EMC standard intended primarily for a military application e.g. MIL STD 461 or
DEF STAN 59-41. Currently such apparatus also require testing to civil standards or the compilation
of a Technical Construction File (TCF) to meet the EMC Directive. Examples of dual use apparatus
are given in Annex A.

---------------------- Page: 6 ----------------------

SIST R210-008:2003
- 5 - R210-008:2002
1 Scope
Apparatus coming within the scope of these guidelines is:
a) Apparatus that is designed specifically for military purposes and subsequently procured for civil
applications.
b) Apparatus that is designed from the outset for military and civil purposes.
This document does not include apparatus designed for a civil application and subsequently procured
for military use. Such apparatus has to meet the EMC Directive by virtue of its original application.
This guide has been drafted on the assumption the apparatus concerned complies with one of the
national or international military EMC specifications listed in 4.2.
2 Objectives
The objectives of this guide can be summarised as follows:
1) To assist manufacturers of apparatus coming within the scope of this document to follow the
Technical Construction File (TCF) route to conformity under the EMC Directive (Art 10.2).
2) To reduce the need for duplication of testing where it can be demonstrated that compliance with
the military standards to which the apparatus was designed and constructed satisfies the
protection requirements of the Directive.
3 Electromagnetic environment
There are many differences between the military and civil EMC standards. These differences concern
the primary aims of the standards which address the principal problems arising from their respective
operating environments. Military EMC specifications primarily concentrate on intra-system
compatibility of sub-assemblies, such that complete system level compatibility is achieved in a
potentially high packing density situation. The harmonised European EMC standards adopted as
relevant under the EMC Directive are more concerned with inter-system compatibility and generally
involve greater protection distances. These guidelines have been drafted taking into consideration the
differences between civil and military environments and test methods and procedures.
Dual purpose apparatus is to be designed to meet a range of EM phenomena where the designer will
choose those appropriate for the product, and its intended environment. In most dual purpose
apparatus, conformity with a minimum range of phenomena may be demonstrated by compliance
with the relevant tests included in the military test specification listed in 5.2. For those apparatus
which have interfaces with public utility supplies, or other apparatus not constructed to military
standards, additional EMC assessments may be required.

---------------------- Page: 7 ----------------------

SIST R210-008:2003
R210-008:2002 - 6 -
4 Applicable EMC standards
4.1 Standards elaborating the essential protection requirements of the EMC Directive
The EMC Directive refers to relevant harmonised European standards. Apparatus in compliance with
the relevant standards enjoy the presumption of conformity with the directive's essential
requirements. The Official Journal of the Commission of the European Union publishes standards
which are considered relevant and can be used in a declaration of conformity. These are:
a) product and product family standards.
b) generic standards for applicability in particular environments where no product standard is
available.
Product standards take precedence over generic standards and contain more information on the
configuration and operation of the apparatus under test together with specific details on the
monitoring and setting of performance levels.
The harmonised European Generic standards, EN 50081-1, and EN 50082-1, for emissions and
immunity respectively, apply to the residential, commercial and light industrial environment, and
EN 50081-2 and EN 50082-2 apply to the industrial environment.
The Generic standards refer to Basic standards which contain information on the test methods, limits
or disturbance levels. The raft of Basic standards assembled for the Generic standards has been
considered by CENELEC to include the range of EMC phenomena which cover the essential
requirements. The Generic standards therefore provide a basis for comparisons with the phenomena
covered in military standards.
These civil standards are primarily intended to cover the situations where interactions with other
apparatus e.g. radio communications apparatus due to emissions from the product are tested typically
over a 10 - 30 m range. The immunity standards effectively replicate the electromagnetic
environments in which the apparatus is intended to operate.
4.2 Applicable military standards
Examples of military standards that can be used are listed below:
MIL-STD 461-462 (USA)
DEF-STAN 59-41 (UK)
VG 95373 (Germany)
STANAG 3516 (NATO)
GAM EG13 (France)
Military standards may vary in severity for any particular EM phenomenon. It is the responsibility of
the Manufacturer State reviewing the military EMC standard(s) used in the product to justify technical
equivalence with the essential protection requirements of the EMC Directive.
These Military standards are primarily intended to ensure compatibility of co-located systems on a
platform. Radiated emissions and immunity tests are made at 1 m distance to reflect the more severe
types of intra-system effects in addition to the inter-system effects.
NOTE These standards can be obtained from the appropriate National Defence Standards Directorates.

---------------------- Page: 8 ----------------------

SIST R210-008:2003
- 7 - R210-008:2002
5 Factors affecting the sale of dual purpose apparatus on the European market
5.1 Legal position
The EC EMC Directive may not apply to apparatus specifically designed for military purposes, i.e.
those included in the list of products produced under Article 223.2, see Annex B. The list of products
which are considered military and may be excluded from the EMC Directive by a Member State are
included in Council Decision 255/58, and repeated in Annex C.
The current position of Member States in this aspect is given in Annex D. The EC EMC Directive
applies to apparatus coming within the scope of this guide as defined in clause 1.
Member States can apply national provisions relating to the protection of the environment or the
working environment, and notify the Commission of these provisions, under Article 100a.4.
Where a contract is placed by a company in one Member State on a company in another Member
State, the law that applies is stated in the contract. This is normally the law of the Member State in
which the originating company is established.
Manufacturers need to be aware that there are EMC requirements over and above those required by
a military procurement specification if the apparatus is also to have a civil application.
Manufacturers of military apparatus specially designed for military purposes should consider the
likelihood of the apparatus causing electromagnetic disturbance. Where that disturbance is liable to
degrade the performance of other apparatus which might reasonably be expected to be present in the
environment associated with the military apparatus's use, prudent measures should be taken to
reduce or eliminate that disturbance.
5.2 Technical requirements
All apparatus placed on the market in Europe and coming within the scope of the EMC Directive
89/336/EEC shall satisfy the protection requirements of the directive and its amendments. Products
placed on the market are required to follow the conformity assessment procedures of Article 10 of the
Directive. Relevant apparatus shall be supplied with a valid declaration of conformity, bear the CE
mark, and shall be installed and used in accordance with the manufacturer's instructions.
6 Requirements for dual purpose apparatus
6.1 General principles
Dual purpose apparatus should satisfy the EMC requirements imposed by the various environments
in which it is intended to work. Apparatus intended for a military environment needs to satisfy
procurement specifications appropriate to the particular application. As might be expected, a high
degree of commonality exists between the EM phenomena considered in both regimes and thus the
opportunities for a cost effective approach are apparent.
The requirements for dual purpose apparatus are based on the following assumptions and strategy:
1) The military standards provide adequate protection for the military environment.
2) The military EM environment is recognised as being at least as severe, and in some cases
considerably more severe, than the residential, commercial and light industrial and industrial
environments.
3) Based upon a technical rationale, as given in the example in Annex E, compliance with the
appropriate class of military standard will ensure conformity with the protection requirements of
the EMC Directive.

---------------------- Page: 9 ----------------------

SIST R210-008:2003
R210-008:2002 - 8 -
4) The total set of requirements for dual purpose apparatus should comprise the following:
a) a core of EMC tests common to both the military and civil environments where the military
standards will be applied.
b) additional conformity requirements to address EM phenomena, not covered by the military
standards, which are considered essential for conformity with the requirements of the
Directive. Harmonised European standards should be applied.
6.2 Specific requirements
Annex E presents an example of the use of a national military EMC standard in place of civil
standards where there are common phenomena. Where necessary, additional tests to a civil standard
are also identified. Manufacturers are advised to prepare and retain a file describing the military and
EN tests and limits applied and how these relate to the general protection requirements.
7 Conformity assessment procedure
Dual purpose apparatus shall be declared in conformity with the protection requirements of the
Directive.
Manufacturers should prepare a Technical Construction File on their apparatus and submit the file for
assessment by a Competent Body based in the EU and appointed by one of the Member States.
NOTE Apparatus comprising or containing radio transmission apparatus will be subject to the provisions of Article 10.5 of the EMC
Directive and applicable national regulations.
For guidance the EMC standards considered useful to apply are listed in Tables 1 to 4.
The Technical Construction File should state which military standards have been applied and the
harmonised European standards also applied for any additional phenomena. Military standards
contain limits and levels appropriate for a range of environments and circumstances and the technical
rationale in the TCF should discuss the equivalence of the applied limits or levels to the civil
requirements.
The Competent Body should verify the equivalence of the military standards with essential
requirements taking note of different antenna distances and detector functions etc.
The manufacturer shall produce a declaration of conformity then apply
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.