SIST EN 13763-3:2002

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 3: Bestimmung der SchlagempfindlichkeitExplosifs a usage civil - Détonateurs et relais - Partie 3: Détermination de la sensibilité au chocExplosives for civil uses - Detonators and relays - Part 3: Determination of sensitiveness to impact71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13763-3:2002SIST EN 13763-3:2002en01-december-2002SIST EN 13763-3:2002SLOVENSKI
STANDARD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13763-3September 2002ICS 71.100.30English versionExplosives for civil uses - Detonators and relays - Part 3:Determination of sensitiveness to impactExplosifs à usage civil - Détonateurs et relais - Partie 3:Détermination de la sensibilité au chocExplosivstoffe für zivile Zwecke - Zünder undVerzögerungselemente - Teil 3: Bestimmung derSchlagempfindlichkeitThis European Standard was approved by CEN on 1 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13763-3:2002 E



EN 13763-3:2002 (E)2ContentspageForeword.31Scope.52Normative references.53Terms and definitions.54Apparatus.55Test pieces.66Procedure.77Test report.8Annex A (informative)
Range of applicability of the test method.9Annex B (normative)
Illustrations of the BAM fall-hammer.10Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.15



EN 13763-3:2002 (E)3ForewordThis document (EN 13763-3:2002) has been prepared by Technical Committee CEN/TC 321 "Explosives for civiluses", the secretariat of which is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by March 2003, and conflicting national standards shall be withdrawn at the latest byMarch 2003.This European Standard has been prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of EU Directive(s).For the relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard.This European Standard is one of a series of standards with the generic title Explosives for civil uses – Detonatorsand relays. The other parts of this series are listed below:prEN 13763-1Part 1: Requirements.EN 13763-2Part 2: Determination of thermal stability.prEN 13763-4Part 4: Determination of resistance to abrasion of leading wires and shock tubes.prEN 13763-5Part 5: Determination of resistance to cutting damage of leading wires and shock tubes.prEN 13763-6Part 6: Determination of resistance to cracking in low temperatures of leading wires.prEN 13763-7Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections,crimps and closures.prEN 13763-8Part 8: Determination of resistance to vibration of plain detonators.prEN 13763-9Part 9: Determination of resistance to bending of detonators.prEN 13763-10Part 10: Determination of resistance to torsion of sealing plugs.prEN 13763-11Part 11: Determination of drop resistance of detonators and relays.prEN 13763-12Part 12: Determination of resistance to
hydrostatic pressure.prEN 13763-13Part 13: Determination of resistance of electric detonator to electrostatic discharge.prEN 13763-14Part 14: Determination of resistance of electric detonator to the influence of radio frequencyradiation.prEN 13763-15Part 15: Determination of equivalent initiating capability.prEN 13763-16Part 16: Determination of delay accuracy.prEN 13763-17Part 17: Determination of no-fire current of electric detonators.prEN 13763-18Part 18: Determination of series firing current of electric detonators.prEN 13763-19Part 19: Determination of firing pulse of electric detonators.prEN 13763-20Part 20: Determination of total resistance of electric detonators.



EN 13763-3:2002 (E)4prEN 13763-21Part 21: Determination of flash-over voltage of electric detonators.prEN 13763-22Part 22: Determination of capacitance, insulation resistance and insulation breakdown of leadingwires.EN 13763-23Part 23: Determination of the shock-wave velocity of shock tube.EN 13763-24Part 24: Determination of the non-conductivity of shock tube.prEN 13763-25Part 25: Determination of transfer capacity of relay and coupling accessories.prEN 13763-26Part 26: Definitions, methods and requirements for devices and accessories for reliable and safefunction of detonators and relays.prCEN/TS 13763-27Part 27: Definitions, methods and requirements for electronic initiation system.Annex A is informative and annex B is normative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.



EN 13763-3:2002 (E)51 ScopeThis European Standard specifies methods for checking that plain detonators, electric detonators, non-electricdetonators, surface connectors, shock tubes and detonating cord relays will not explode when subjected to animpact under specified conditions.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).prEN 13857-1, Explosives for civil uses — Part 1: Terminology.prEN 13763-1, Explosives for civil uses. Detonators and relays — Part 1: Requirements.EN ISO 4957:1999, Tool steels (ISO 4957:1999).EN ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories (ISO/IEC17025:1999).ISO 1052:1982, Steels for general engineering purposes.ISO 683-9:1988, Heat-treatable steels, alloy steels and free-cutting steels — Part 9: Wrought free-cutting steels.ISO 683-17:1999, Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and rol
...