Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)

This International Standard specifies the characteristics of countersunk slotted raised head screws of product grade A and with threads from M1,6 to M10 inclusive.
If, in special cases, specifications other than those listed in this International Standard are required, they can be selected from existing International Standards, for example ISO 261, ISO 888, ISO 898-1, ISO 965-2 and ISO 3506-1.

Linsen-Senkschrauben mit Schlitz - Produktklasse A (ISO 2010:2011)

Diese Internationale Norm enthält Festlegungen über Linsensenkschrauben mit Schlitz, in Produktklasse A,
mit Gewinde von M1,6 bis M10.
Werden in besonderen Fällen andere Festlegungen als die in der vorliegenden Internationalen Norm benötigt,
so können diese den bestehenden Internationalen Normen entnommen werden, z. B. ISO 261, ISO 888,
ISO 898-1, ISO 965-2 und ISO 3506-1.

Vis à métaux à tête fraisée bombée fendue - Grade A (ISO 2010:2011)

L'ISO 2010:2011 spécifie les caractéristiques des vis à métaux à tête fraisée bombée fendue de grade A et de diamètre de filetage M1,6 à M10 inclus.

Vijaki z zarezano lečasto ugrezno glavo - Razred izdelave A (ISO 2010:2011)

Ta mednarodni standard določa značilnosti vijakov z zarezano lečasto ugrezno glavo razreda izdelave A in z navoji od M1,6 do vključno M10.
Če se v posebnih primerih zahtevajo specifikacije, ki so drugačne od navedenih v tem mednarodnem standardu, se lahko izberejo med obstoječimi mednarodnimi standardi, na primer ISO 261, ISO 888, ISO 898-1, ISO 965-2 in ISO 3506-1.

General Information

Status
Published
Publication Date
24-Oct-2011
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
21-Oct-2011
Due Date
26-Dec-2011
Completion Date
25-Oct-2011

Relations

Buy Standard

Standard
EN ISO 2010:2011
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Linsen-Senkschrauben mit Schlitz - Produktklasse A (ISO 2010:2011)Vis à métaux à tête fraisée bombée fendue - Grade A (ISO 2010:2011)Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)21.060.10Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:Ta slovenski standard je istoveten z:EN ISO 2010:2011SIST EN ISO 2010:2011en,fr,de01-december-2011SIST EN ISO 2010:2011SLOVENSKI
STANDARDSIST EN ISO 2010:19961DGRPHãþD



SIST EN ISO 2010:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 2010
September 2011 ICS 21.060.10 Supersedes EN ISO 2010:1994English Version
Slotted raised countersunk head screws -Product grade A (ISO 2010:2011)
Vis à métaux à tête fraisée bombée fendue - Grade A (ISO 2010:2011)
Linsensenkschrauben mit Schlitz - Produktklasse A (ISO 2010:2011) This European Standard was approved by CEN on 8 August 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 2010:2011: ESIST EN ISO 2010:2011



EN ISO 2010:2011 (E) 2 Contents Page Foreword .3 SIST EN ISO 2010:2011



EN ISO 2010:2011 (E) 3 Foreword This document (EN ISO 2010:2011) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2012, and conflicting national standards shall be withdrawn at the latest by March 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 2010:1994. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 2010:2011 has been approved by CEN as a EN ISO 2010:2011 without any modification.
SIST EN ISO 2010:2011



SIST EN ISO 2010:2011



Reference numberISO 2010:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO2010Fourth edition2011-09-01Slotted raised countersunk head screws — Product grade A Vis à métaux à tête fraisée bombée fendue — Grade A
SIST EN ISO 2010:2011



ISO 2010:2011(E)
COPYRIGHT PROTECTED DOCUMENT
©
ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2011 – All rights reserved
SIST EN ISO 2010:2011



ISO 2010:2011(E) © ISO 2011 – All rights reserved iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 2010 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 11, Fasteners with metric external thread. This fourth edition cancels and replaces the third edition (ISO 2010:1994), of which it constitutes a minor revision.
SIST EN ISO 2010:2011



SIST EN ISO 2010:2011



INTERNATIONAL STANDARD ISO 2010:2011(E) © ISO 2011 – All rights reserved 1 Slotted raised countersunk head screws — Pr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.