Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements (IEC 62208:2011)

This International Standard applies to empty enclosures, prior to the incorporation of switchgear and controlgear components by the user, as supplied by the enclosure manufacturer. This standard specifies general definitions, classifications, characteristics and test requirements of enclosures to be used as part of switchgear and controlgear assemblies (e.g. in accordance with the IEC 61439 series), the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c., and suitable for general use for either indoor or outdoor applications.

Leergehäuse für Niederspannungs-Schaltgerätekombinationen - Allgemeine Anforderungen (IEC 62208:2011)

Enveloppes vides destinées aux ensembles d'appareillage à basse tension - Règles générales (CEI 62208:2011)

La CEI 62208:2011 s'applique aux enveloppes vides, avant incorporation de l'appareillage par l'utilisateur, dans l'état où elles sont fournies par le fabricant. Cette norme spécifie les définitions, les classifications, les caractéristiques et les exigences d'essai générales des enveloppes à utiliser en tant que partie d'ensembles d'appareillage (selon par exemple la série CEI 61439), dont la tension assignée ne dépasse pas 1 000 V en courant alternatif ou 1 500 V en courant continu pour usage général extérieur ou intérieur. Cette deuxième édition annule et remplace la première édition parue en 2002. Cette édition constitue une révision technique et elle inclut les modifications techniques majeures suivantes par rapport à l'édition antérieure:  - prise en compte de la série de normes CEI 61439 restructurée;  - alignement des procédures d'essai sur les toutes nouvelles normes applicables.

Prazna ohišja za sestave nizkonapetostnih stikalnih in krmilnih naprav - Splošne zahteve (IEC 62208:2011)

Ta mednarodni standard se uporablja za prazna ohišja, preden uporabnik doda stikalne in krmilne dele, ki jih je dobavil proizvajalec ohišja. Ta standard določa splošne definicije, klasifikacije, značilnosti in preskusne zahteve za ohišja, ki so namenjena za uporabo kot del sestavov stikalnih in krmilnih naprav (npr. v skladu s skupino standardov IEC 61439) in katerih nazivna napetost ne presega 1000 V pri izmenični napetosti ali 1500 V pri enosmerni napetosti in so primerna za splošno uporabo znotraj ali na prostem.

General Information

Status
Published
Publication Date
06-Mar-2012
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
05-Mar-2012
Due Date
10-May-2012
Completion Date
07-Mar-2012

Relations

Buy Standard

Standard
EN 62208:2012
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prazna ohišja za sestave nizkonapetostnih stikalnih in krmilnih naprav - Splošne zahteve (IEC 62208:2011)Leergehäuse für Niederspannungs-Schaltgerätekombinationen - Allgemeine Anforderungen (IEC 62208:2011)Enveloppes vides destinées aux ensembles d'appareillage à basse tension - Règles générales (CEI 62208:2011)Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements (IEC 62208:2011)29.130.20Nizkonapetostne stikalne in krmilne napraveLow voltage switchgear and controlgearICS:Ta slovenski standard je istoveten z:EN 62208:2011SIST EN 62208:2012en01-april-2012SIST EN 62208:2012SLOVENSKI
STANDARDSIST EN 62208:20041DGRPHãþD



SIST EN 62208:2012



EUROPEAN STANDARD EN 62208 NORME EUROPÉENNE
EUROPÄISCHE NORM October 2011
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62208:2011 E
ICS 29.130.20 Supersedes EN 62208:2003
English version
Empty enclosures for low-voltage switchgear
and controlgear assemblies -
General requirements (IEC 62208:2011)
Enveloppes vides destinées aux ensembles d'appareillage
à basse tension -
Exigences générales (CEI 62208:2011)
Leergehäuse für Niederspannungs-Schaltgerätekombinationen -
Allgemeine Anforderungen (IEC 62208:2011)
This European Standard was approved by CENELEC on 2011-09-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 62208:2012



EN 62208:2011 - 2 -
Foreword The text of document 17D/442/FDIS, future edition 2 of IEC 62208, prepared by SC 17D, "Low-voltage switchgear and controlgear assemblies", of IEC TC 17, "Switchgear and controlgear" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62208:2011.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-06-23 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2014-09-23
This document supersedes EN 62208:2003. EN 62208:2011 constitutes a technical revision and includes the following significant technical changes with respect to EN 62208:2003: – consideration of the restructured series of standards EN 61439; – alignment of test procedures with the newest relevant standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 62208:2011 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60216 series NOTE
Harmonized in EN 60216 series. IEC 60670 series NOTE
Harmonized in EN 60670 series. IEC/TR 60890 NOTE
Harmonized as CLC/TR 60890. IEC 61000-5-7:2001 NOTE
Harmonized as EN 61000-5-7:2001 (not modified). IEC 61439 series NOTE
Harmonized in EN 61439 series.
SIST EN 62208:2012



- 3 - EN 62208:2011
Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60068-2-2 2007
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.