SIST EN 60191-1:2008

Oznaka standarda: SIST EN 60191-1:2008
Koda projekta: 17088
Organizacija: SIST
Naslov (angleški): Mechanical standardization of semiconductor devices -- Part 1: General rules for the preparation of outline drawings of discrete devices
Naslov (slovenski): Mehanska standardizacija polprevodniških elementov - 1. del: Splošna pravila za pripravo tehničnih risb diskretnih elementov (IEC 60191-1:2007)
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 20% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 60191-1:2008 angleški jezik Active SIST-I: 78.10 EUR
PDF
Papir
Tehnični odbor: I11 - Imaginarni 11
ICS: 01.100.25 31.080.01 31.240
Status: Objavljen
Objavljen: 01-jan-2008
Refer. št. objave: Sporočila 2008-01
Razveljavitev: 01-mar-2021
Referenca razveljavitve: Sporocila 2021-03
Področje projekta (angleško): This part of IEC 60191 gives guidelines on the preparation of outline drawings of discrete devices. The primary object of these drawings is to indicate the space which should be allowed for devices in an equipment, together with other dimensional characteristics required to ensure mechanical interchangeability. It should be noted that complete interchangeability involves other considerations such as the electrical and thermal characteristics of the semiconductor devices concerned. The international standardization represented by these drawings therefore encourages the manufacturers of devices to comply with the tolerances shown on the drawings in order to extend their range of customers internationally. It also gives equipment designers an assurance of mechanical interchangeability between the devices obtained from suppliers in different countries, provided they allow the space in their equipment that is indicated by the drawings and take note of the more precise information on bases, studs, etc.
Povezava na standarde
Povezava Ime Datum
Nadomeščen z SIST EN IEC 60191-1:2018 - Standardizacija mehanskih lastnosti polprevodniških elementov - 1. del: Splošna pravila za pripravo tehničnih risb diskretnih elementov (IEC 60191-1:2018) 03-apr-2018
Revidiran SIST EN IEC 60191-1:2018 - Standardizacija mehanskih lastnosti polprevodniških elementov - 1. del: Splošna pravila za pripravo tehničnih risb diskretnih elementov (IEC 60191-1:2018) 01-nov-2016


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi