Fire-resistance tests - Elements of building construction - Part 1: General requirements - AMENDMENT 1

Essai de résistance au feu - Éléments de construction - Partie 1: Exigences générales - AMENDEMENT 1

Preskusi požarne odpornosti - Gradbeni elementi - 1. del: Splošne zahteve - Dopolnilo A1

General Information

Status
Published
Publication Date
06-Oct-2021
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
08-Sep-2021
Due Date
13-Nov-2021
Completion Date
07-Oct-2021

Relations

Buy Standard

Standard
ISO 834-1:1999/Amd 1:2012
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
Amendment
ISO 834-1:2021/A1:2021
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

INTERNATIONAL  ISO
STANDARD 834-1
First edition
1999-09-15
AMENDMENT 1
2012-01-15
Fire-resistance tests — Elements of
building construction —
Part 1:
General requirements
AMENDMENT 1
Essai de résistance au feu — Éléments de construction —
Partie 1: Exigences générales
AMENDEMENT 1
Reference number
ISO 834-1:1999/Amd.1:2012(E)
©
 ISO 2012

---------------------- Page: 1 ----------------------
ISO 834-1:1999/Amd.1:2012(E)
COPYRIGHT PROTECTED DOCUMENT
©  ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 834-1:1999/Amd.1:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 834-1:1999 was prepared by Technical Committee ISO/TC 92, Fire safety, Subcommittee
SC 2, Fire containment.
© ISO 2012 – All rights reserved  iii

---------------------- Page: 3 ----------------------
ISO 834-1:1999/Amd.1:2012(E)
Fire-resistance tests — Elements of building construction —
Part 1:
General requirements
AMENDMENT 1
Page iii, Foreword
Add ISO/TR 834-2 to the list of parts:
Part 2: Guidance on measuring uniformity of furnace exposure on test samples [Technical Report]
Page 4, 5.5.1.1
Replace the subheading with the following:
5.5.1.1  Furnace temperature thermocouples
Replace the first paragraph with the following:
The furnace thermocouples temperature shall be measured with plate thermometers which comprise an
assembly of a folded steel nickel alloy plate, the thermocouple fixed to it and containing insulation material.
The measuring and recording equipment shall be capable of operating within the limits specified in 5.6.
Page 5, 5.5.1.1
Replace the second paragraph with following:
The plate part shall be constructed from (150 ± 1) mm long by (100 ± 1) mm wide by (0,7 ± 0,1) mm
thick nickel alloy sheet strips folded to the design as shown in figure 1. The folded metal plate shall be
constructed from a strip of austenitic nicke
...

SLOVENSKI STANDARD
SIST ISO 834-1:2021/A1:2021
01-november-2021
Preskusi požarne odpornosti - Gradbeni elementi - 1. del: Splošne zahteve -
Dopolnilo A1
Fire-resistance tests - Elements of building construction - Part 1: General requirements -
AMENDMENT 1
Essai de résistance au feu - Éléments de construction - Partie 1: Exigences générales -
AMENDEMENT 1
Ta slovenski standard je istoveten z: ISO 834-1:1999/Amd 1:2012
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.060.01 Stavbni elementi na splošno Elements of buildings in
general
SIST ISO 834-1:2021/A1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST ISO 834-1:2021/A1:2021

---------------------- Page: 2 ----------------------
SIST ISO 834-1:2021/A1:2021
INTERNATIONAL  ISO
STANDARD 834-1
First edition
1999-09-15
AMENDMENT 1
2012-01-15
Fire-resistance tests — Elements of
building construction —
Part 1:
General requirements
AMENDMENT 1
Essai de résistance au feu — Éléments de construction —
Partie 1: Exigences générales
AMENDEMENT 1
Reference number
ISO 834-1:1999/Amd.1:2012(E)
©
 ISO 2012

---------------------- Page: 3 ----------------------
SIST ISO 834-1:2021/A1:2021
ISO 834-1:1999/Amd.1:2012(E)
COPYRIGHT PROTECTED DOCUMENT
©  ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

---------------------- Page: 4 ----------------------
SIST ISO 834-1:2021/A1:2021
ISO 834-1:1999/Amd.1:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 834-1:1999 was prepared by Technical Committee ISO/TC 92, Fire safety, Subcommittee
SC 2, Fire containment.
© ISO 2012 – All rights reserved  iii

---------------------- Page: 5 ----------------------
SIST ISO 834-1:2021/A1:2021

---------------------- Page: 6 ----------------------
SIST ISO 834-1:2021/A1:2021
ISO 834-1:1999/Amd.1:2012(E)
Fire-resistance tests — Elements of building construction —
Part 1:
General requirements
AMENDMENT 1
Page iii, Foreword
Add ISO/TR 834-2 to the list of parts:
Part 2: Guidance on measuring uniformity of furnace exposure on test samples [Technical Report]
Page 4, 5.5.1.1
Replace the subheading with the following:
5.5.1.1  Furnace temperature thermocouples
Replace the first paragraph with the following:
The furnace
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.