Integrated optics - Vocabulary - Part 2: Terms used in classification (ISO 11807-2:2021)

This document defines terms used in the classification of integrated optical elements, integrated optical
components and integrated optical devices, which find applications, for example, in the fields of optical
communications and sensors

Integrierte Optik - Begriffe - Teil 2: Begriffe für die Klassifizierung (ISO 11807-2:2021)

Dieses Dokument definiert Begriffe zur Klassifizierung von integriert-optischen Elementen, integriert-optischen Komponenten und integriert-optischen Baugruppen, wie sie beispielsweise in den Bereichen optische Nachrichtentechnik und Sensorik eingesetzt werden.

Optique intégrée - Vocabulaire - Partie 2: Termes utilisés pour la classification (ISO 11807-2:2021)

Le présent document définit les termes utilisés pour la classification des éléments optiques intégrés, des composants optiques intégrés et des dispositifs optiques intégrés, qui trouvent leurs applications, par exemple, dans les domaines des communications optiques et des capteurs.

Integrirana optika - Slovar - 2. del: Strokovni izrazi v klasifikaciji (ISO 11807-2:2021)

General Information

Status
Published
Public Enquiry End Date
19-May-2020
Publication Date
15-Nov-2021
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
04-Nov-2021
Due Date
09-Jan-2022
Completion Date
16-Nov-2021

Relations

Buy Standard

Standard
EN ISO 11807-2:2021
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 11807-2:2020
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11807-2:2021
01-december-2021
Nadomešča:
SIST EN ISO 11807-2:2005
Integrirana optika - Slovar - 2. del: Strokovni izrazi v klasifikaciji (ISO 11807-2:2021)
Integrated optics - Vocabulary - Part 2: Terms used in classification (ISO 11807-2:2021)
Integrierte Optik - Begriffe - Teil 2: Begriffe für die Klassifizierung (ISO 11807-2:2021)
Optique intégrée - Vocabulaire - Partie 2: Termes utilisés pour la classification (ISO
11807-2:2021)
Ta slovenski standard je istoveten z: EN ISO 11807-2:2021
ICS:
01.040.31 Elektronika (Slovarji) Electronics (Vocabularies)
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
SIST EN ISO 11807-2:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11807-2:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 11807-2:2021


EN ISO 11807-2
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2021
EUROPÄISCHE NORM
ICS 01.040.31; 31.260 Supersedes EN ISO 11807-2:2005
English Version

Integrated optics - Vocabulary - Part 2: Terms used in
classification (ISO 11807-2:2021)
Optique intégrée - Vocabulaire - Partie 2: Termes Integrierte Optik - Begriffe - Teil 2: Begriffe für die
utilisés pour la classification (ISO 11807-2:2021) Klassifizierung (ISO 11807-2:2021)
This European Standard was approved by CEN on 9 October 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11807-2:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 11807-2:2021
EN ISO 11807-2:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 11807-2:2021
EN ISO 11807-2:2021 (E)
European foreword
This document (EN ISO 11807-2:2021) has been prepared by Technical Committee ISO/TC 172 "Optics
and photonics" in collaboration with Technical Committee CEN/TC 123 “Lasers and photonics” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2022, and conflicting national standards shall be
withdrawn at the latest by April 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11807-2:2005.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 11807-2:2021 has been approved by CEN as EN ISO 11807-2:2021 without any
modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 11807-2:2021

---------------------- Page: 6 ----------------------
SIST EN ISO 11807-2:2021
INTERNATIONAL ISO
STANDARD 11807-2
Second edition
2021-10
Integrated optics — Vocabulary —
Part 2:
Terms used in classification
Optique intégrée — Vocabulaire —
Partie 2: Termes utilisés pour la classification
Reference number
ISO 11807-2:2021(E)
© ISO 2021

---------------------- Page: 7 ----------------------
SIST EN ISO 11807-2:2021
ISO 11807-2:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2021 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 11807-2:2021
ISO 11807-2:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 Types of component configuration . 1
3.2 Types of function . 2
3.3 Passive elements, components and modules . 3
3.4 Dynamic elements, components and modules . 7
3.5 Active elements, components and modules . 7
Bibliography . 9
iii
© ISO 2021 – All rights reserved

---------------------- Page: 9 ----------------------
SIST EN ISO 11807-2:2021
ISO 11807-2:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 172 Optics and photonics, Subcommittee
SC 9, Laser and electro optical systems, in collaboration with the European Committee for Standardization
(CEN) Technical Committee CEN/TC 123, Lasers and photonics, in accordance with the agreement on
technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 11807-2:2001), which has been technically
revised. The main changes compared to the previous edition are as follows:
— Terminologies that have not been frequently used over the last 5 to 10 years are revised to those
matching to current trends.
— In particular, in 3.1 types of component configuration, configuration is revised by adding a new
configuration, component, while “chip” is replaced for “component” and ”module.”
— In 3.2 “controllable” is replaced by “dynamic,” which is placed between passive and active.
— In the revision process, terminologies and definitions are compared to similar terminology definition
in IEC and harmonized.
A list of all parts in the ISO 11807 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
 © ISO 2021 – All rights reserved

---------------------- Page: 10 ----------------------
SIST EN ISO 11807-2:2021
ISO 11807-2:2021(E)
Introduction
Integrated optical devices are classified using three major fields based on user-oriented criteria. In the
following text, the attribute “integrated optical” will usually be omitted.
The first criterion for classification is that the devices may be single-mode or multi-mode components.
Secondly, integrated optical devices are classified according to complexity of the configuration (see
Clause 3 and Figure 1: elements, components, modules and devices).
The third criterion for classification is the function of the component. In 3.2, components are classified
according to a general definition of the function, (passive, dynamic, active). In 3.3, more specific
subclassification is made according to functional criteria. The functional classification is defined for
integrated optical elements, but can also be used in a similar manner for components, modules and
devices. In the latter cases, the classification refers to the element of highest functional complexity (i.e.
passive, dynamic, active).
v
© ISO 2021 – All rights reserved

---------------------- Page: 11 ----------------------
SIST EN ISO 11807-2:2021

---------------------- Page: 12 ----------------------
SIST EN ISO 11807-2:2021
INTERNATIONAL STANDARD ISO 11807-2:2021(E)
Integrated optics — Vocabulary —
Part 2:
Terms used in classification
1 Scope
This document defines terms used in the classification of integrated optical elements, integrated optical
components and integrated optical devices, which find applications, for example, in the fields of optical
communications and sensors.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 11807-
...

SLOVENSKI STANDARD
oSIST prEN ISO 11807-2:2020
01-maj-2020
Integrirana optika - Slovar - 2. del: Strokovni izrazi v klasifikaciji (ISO/DIS 11807-
2:2020)
Integrated optics - Vocabulary - Part 2: Terms used in classification (ISO/DIS 11807-
2:2020)
Integrierte Optik - Begriffe - Teil 2: Begriffe für die Klassifizierung (ISO/DIS 11807-
2:2020)
Optique intégrée - Vocabulaire - Partie 2: Termes utilisés pour la classification (ISO/DIS
11807-2:2020)
Ta slovenski standard je istoveten z: prEN ISO 11807-2
ICS:
01.040.31 Elektronika (Slovarji) Electronics (Vocabularies)
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
oSIST prEN ISO 11807-2:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 11807-2:2020

---------------------- Page: 2 ----------------------
oSIST prEN ISO 11807-2:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 11807-2
ISO/TC 172/SC 9 Secretariat: DIN
Voting begins on: Voting terminates on:
2020-03-30 2020-06-22
Integrated optics — Vocabulary —
Part 2:
Terms used in classification
Optique intégrée — Vocabulaire —
Partie 2: Termes utilisés pour la classification
ICS: 01.040.31; 31.260
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 11807-2:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020

---------------------- Page: 3 ----------------------
oSIST prEN ISO 11807-2:2020
ISO/DIS 11807-2:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 11807-2:2020
ISO/DIS 11807-2:2020(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 Types of component configuration . 1
3.2 Types of function . 2
3.3 Passive elements, components, and modules . 3
3.4 Dynamic elements, components, and modules . 7
3.5 Active elements, components, and modules . 7
Bibliography . 9
© ISO 2020 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 11807-2:2020
ISO/DIS 11807-2:2020(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 172 Optics and photonics, Subcommittee
SC 9, Laser and electro optical systems
This second edition cancels and replaces the first edition (ISO 11807-2:2001), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— Terminologies that have not been frequently used over the last 5 to 10 years are revised to those
matching to current trends.
— In particular, in 3.1 types of component configuration, configuration is revised by adding a new
configuration, component, while “chip” is replaced for “component” and”module.”
— In 3.2 “controllable” is replaced by “dynamic,” which is placed between passive and active.
— In the revision process, terminologies and definitions are compared to similar terminology definition
in IEC and harmonized.
A list of all parts in the ISO 11807 series can be found on the ISO website.
Annex A of this document is for information only.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html .
iv © ISO 2020 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 11807-2:2020
ISO/DIS 11807-2:2020(E)

Introduction
Integrated optical devices are classified using three major fields based on user-oriented criteria. In the
following text, the attribute “integrated optical” will usually be omitted.
The first criterion for classification is that the devices may be single-mode or multi-mode components.
Secondly, integrated optical devices are classified according to complexity of the configuration (see
Clause 3 and Figure 1: elements, components, and devices).
The third criterion for classification is the function of the component. In 3.2, components are classified
according to a general definition of the function, (passive, controllable, active). In 3.3, more specific
subclassification is made according to functional criteria. The functional classification is defined for
integrated optical elements, but can also be used in a similar manner for components and devices. In
the latter cases, the classification refers to the element of highest functional complexity (i.e. passive,
controllable, active).
© ISO 2020 – All rights reserved v

---------------------- Page: 7 ----------------------
oSIST prEN ISO 11807-2:2020

---------------------- Page: 8 ----------------------
oSIST prEN ISO 11807-2:2020
DRAFT INTERNATIONAL STANDARD ISO/DIS 11807-2:2020(E)
Integrated optics — Vocabulary —
Part 2:
Terms used in classification
1 Scope
This document defines terms used in the classification of integrated optical elements, integrated optical
components and integrated optical devices, which find applications, for example, in the fields of optical
communications and sensors.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 11807-1, Integrated optics -Vocabulary - Part 1: Basic terms and symbols
ISO 14881, Integrated optics - Interfaces - Parameters relevant to coupling properties
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 11807-1 and ISO 14881 and
the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http:// www .electropedia .org/
— ISO Online browsing platform: available at https:// www .iso .org/ obp
3.1 Types of component configuration
3.1.1
integrated optical element
optical element which performs a basic function of integrated optics
Note 1 to entry: See Figure 1.
3.1.2
integrated optical component
packaged unit which contains at least one integrated optical element
Note 1 to entry: See Figure 1.
3.1.2
integrated optical module
packaged integration of optical components and/or elements, accomplishing defined functionality
Note 2 to entry: See Figure 1.
© ISO 2020 – All rights reserved 1

---------------------- Page: 9 ----------------------
oSIST prEN ISO 11807-2:2020
ISO/DIS 11807-2:2020(E)

3.1.3
integrated optical device
generic optical unit, either an optical element, an optical component, an optical assembly, an optical
sub-assembly, or an optical module.
Note 1 to entry: See Figure 1.
a) integrated optical element b) integrated optical component
c) integrated optical module d) integrated optical device
Key
1 Interfaces
Figure 1 — Illustration of the classification into elements, components and devices
3.2 Types of function
Note 1 to entry The types of function defined here are specified for elements, whereby they are valid for all
correspon
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.