Jig bushes and accessories for drilling purposes -- Dimensions

Deals with press-fit bushes (headed or headless), liners (headed or headless, the dimensions of which are taken from the press-fit range of bushes), renewable bushes (fixed type and slip type), methods of retaining renewable bushes, and acessories (i.e. tenons, locking screws and stop pins).

Guides de perçage et accessoires -- Dimensions

Vodilne puše in pribor za vrtalne priprave - Mere

General Information

Status
Withdrawn
Publication Date
31-Oct-1995
Withdrawal Date
27-Jan-2010
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
26-Jan-2010
Due Date
18-Feb-2010
Completion Date
28-Jan-2010

Buy Standard

Standard
ISO 4247:1977 - Jig bushes and accessories for drilling purposes -- Dimensions
English language
9 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 4247:1995
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 4247:1977 - Guides de perçage et accessoires -- Dimensions
French language
9 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 4247:1977 - Guides de perçage et accessoires -- Dimensions
French language
9 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL STANDARD.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXAYHAPOAHAII OPI-AHM3ALWiII n0 CTAHAAPTW3AL@iM.ORGANISATION INTERNATIONALE DE NORMALISATION
Jig bushes and accessories for drilling purposes - Dimensions
Guides de pertage et accessoires - Dimensions
First edition - 1977-12-15
Ref. No. ISO 4247-1977 (E)
UDC 621.951
Descriptors : tools, drilling jigs, dimensions, equipment specifications.
Price based on 9 pages

---------------------- Page: 1 ----------------------
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards institutes (ISO member bodies). The work of developing
International Standards is carried out through ISO technical committees. Every
member body interested in a subject for which a technical committee has been set
up has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated
to the member bodies for approval before their acceptance as International
Standards by the ISO Council.
International Standard ISO 4247 was developed by Technical Committee
lSO/TC 29, Smal tools, and was circulated to the member bodies in September 1976.
lt has been approved by the member bodies of the following countries :
Austral ia Spain
I reland
Austria Italy Sweden
Belgium Japan Switzerland
Brazil Korea, Rep. of Turkey
Czechoslovakia Mexico United Kingdom
France Netherlands U.S.A.
Germany Poland U.S.S.R.
Hungary Romania Yugoslavia
India South Af-rica, Rep. of
No member body expressed disapproval of the document.
0 International Organkation fot Standardkation, 1977 l
Printed in Switzerland

---------------------- Page: 2 ----------------------
ISO 42474977 (El
INTERNATIONAL STANDARD
Jig bushes and accessories for drilling purposes - Dimensions
3 TOLERANCES
1 SCOPE AND FIELD OF APPLICATION
The definitive tolerantes to be used are still subject to
This International Standard specif ies the dimensions of
discussion. In the meantime, for jig bushes used for general
bushes to be fitted to jigs for guiding twist drills, and of
purposes, the following tolerantes are recommended :
accessories for use with renewable bushes.
3.1 Tolerantes for press fit bushes and liners
lt deals with the following subjects :
- F7 on bore diameter;
-
which may be either headed or
press-f it bushes,
headless;
-
n6 on body diameter;
-
-
liners, which may be either headed or headless, the
hl3 on head diameter.
dimensions of which are taken from the press-fit range
of bushes;
3.2 Tolerantes for renewable bushes
-- -
F7 on bore diameter;
renewable bushes, fixed type and Slip type;
-
m6 on body diameter;
-
methods of retaining renewable bushes;
-
hl3 on head diameter.
-
accessories (i.e. tenons, locking screws and stop
Pins).
3.3 Tolerantes on stop pins
NOTE - The methods of retaining bushes described in clause 6
Stop Pins, when required, shall be supplied with a tolerante
are in generai use, and member bodies will normally select one of
of m6.
these methods for their national Standards.
SO desired, it is permitted to supply renewable bushes which tan
lf When this type of pin is to be used, the bush manufacturer
be used either as fixed type or Slip type by providing the heads with
shall provide a locating hole, with a tolerante of H7, in the
the necessary featu res.
head of the bush, positioned according to the dimensions
shown in table 4.
3.4 Tolerante for jig-plate holes
2 REFERENCE
Press-fit bushes and liners shall be located in holes which
ISO 4248, Jig bushes - Definitions and nomenclature.l ) have an H7 tolerante.
1) At present at the Stage of draft.

---------------------- Page: 3 ----------------------
ISO 42474977 (E)
4 PRESS-FIT BUSHES AND LINERS
A
Cl
/ The form of the undercut is left
to the manufacturer
FIGURE 1 Press-fit bush or liner - Headed type
FIGURE 2 - Press-fit bush or Iiner - Headless type
- Dimensions of Oiners
TABLE 1
Values in millimetres
Lead
Concen-
Diameter Diameter Entry
on outside
tricity
of bare of body chamferi )
diameter (F.I.M.)
extra-
d v
short lang
cf1 &3
lang
(F7) (n6b max.
10 1,25
16 13
r
25
1,s
0,02
16 28 36
20 36
26 35 39
I I I I -l--
3
2,5
30 42 46 5
25 45 56
35% 48 52
42
55 59
48 62 66 67
55 70 74
78 82
62
78
70 85 90
6
78 95 100
40 78
85 105 110
I I I I
45 89
125 1 130 I
I 105 I
l
1) As an alternative, a radius may be used
2

---------------------- Page: 4 ----------------------
ISO4247-1977 (E)
TABLE 2 - Dimensions of press-fit bushes
Values in millimetres
Diameter of bore
Length
Head 1
I dl 1 I I I
Lead
Concen-
(F7)
Diameter
Entry
on outside tric
...

SLOVENSKI STANDARD
SIST ISO 4247:1995
01-november-1995
Vodilne puše in pribor za vrtalne priprave - Mere
Jig bushes and accessories for drilling purposes -- Dimensions
Guides de perçage et accessoires -- Dimensions
Ta slovenski standard je istoveten z: ISO 4247:1977
ICS:
25.060.20 Delilniki in vpenjala za orodja Dividing and tool-workpiece
in obdelovance holding devices
SIST ISO 4247:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 4247:1995

---------------------- Page: 2 ----------------------

SIST ISO 4247:1995
INTERNATIONAL STANDARD.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXAYHAPOAHAII OPI-AHM3ALWiII n0 CTAHAAPTW3AL@iM.ORGANISATION INTERNATIONALE DE NORMALISATION
Jig bushes and accessories for drilling purposes - Dimensions
Guides de pertage et accessoires - Dimensions
First edition - 1977-12-15
Ref. No. ISO 4247-1977 (E)
UDC 621.951
Descriptors : tools, drilling jigs, dimensions, equipment specifications.
Price based on 9 pages

---------------------- Page: 3 ----------------------

SIST ISO 4247:1995
FOREWORD
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards institutes (ISO member bodies). The work of developing
International Standards is carried out through ISO technical committees. Every
member body interested in a subject for which a technical committee has been set
up has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated
to the member bodies for approval before their acceptance as International
Standards by the ISO Council.
International Standard ISO 4247 was developed by Technical Committee
lSO/TC 29, Smal tools, and was circulated to the member bodies in September 1976.
lt has been approved by the member bodies of the following countries :
Austral ia Spain
I reland
Austria Italy Sweden
Belgium Japan Switzerland
Brazil Korea, Rep. of Turkey
Czechoslovakia Mexico United Kingdom
France Netherlands U.S.A.
Germany Poland U.S.S.R.
Hungary Romania Yugoslavia
India South Af-rica, Rep. of
No member body expressed disapproval of the document.
0 International Organkation fot Standardkation, 1977 l
Printed in Switzerland

---------------------- Page: 4 ----------------------

SIST ISO 4247:1995
ISO 42474977 (El
INTERNATIONAL STANDARD
Jig bushes and accessories for drilling purposes - Dimensions
3 TOLERANCES
1 SCOPE AND FIELD OF APPLICATION
The definitive tolerantes to be used are still subject to
This International Standard specif ies the dimensions of
discussion. In the meantime, for jig bushes used for general
bushes to be fitted to jigs for guiding twist drills, and of
purposes, the following tolerantes are recommended :
accessories for use with renewable bushes.
3.1 Tolerantes for press fit bushes and liners
lt deals with the following subjects :
- F7 on bore diameter;
-
which may be either headed or
press-f it bushes,
headless;
-
n6 on body diameter;
-
-
liners, which may be either headed or headless, the
hl3 on head diameter.
dimensions of which are taken from the press-fit range
of bushes;
3.2 Tolerantes for renewable bushes
-- -
F7 on bore diameter;
renewable bushes, fixed type and Slip type;
-
m6 on body diameter;
-
methods of retaining renewable bushes;
-
hl3 on head diameter.
-
accessories (i.e. tenons, locking screws and stop
Pins).
3.3 Tolerantes on stop pins
NOTE - The methods of retaining bushes described in clause 6
Stop Pins, when required, shall be supplied with a tolerante
are in generai use, and member bodies will normally select one of
of m6.
these methods for their national Standards.
SO desired, it is permitted to supply renewable bushes which tan
lf When this type of pin is to be used, the bush manufacturer
be used either as fixed type or Slip type by providing the heads with
shall provide a locating hole, with a tolerante of H7, in the
the necessary featu res.
head of the bush, positioned according to the dimensions
shown in table 4.
3.4 Tolerante for jig-plate holes
2 REFERENCE
Press-fit bushes and liners shall be located in holes which
ISO 4248, Jig bushes - Definitions and nomenclature.l ) have an H7 tolerante.
1) At present at the Stage of draft.

---------------------- Page: 5 ----------------------

SIST ISO 4247:1995
ISO 42474977 (E)
4 PRESS-FIT BUSHES AND LINERS
A
Cl
/ The form of the undercut is left
to the manufacturer
FIGURE 1 Press-fit bush or liner - Headed type
FIGURE 2 - Press-fit bush or Iiner - Headless type
- Dimensions of Oiners
TABLE 1
Values in millimetres
Lead
Concen-
Diameter Diameter Entry
on outside
tricity
of bare of body chamferi )
diameter (F.I.M.)
extra-
d v
short lang
cf1 &3
lang
(F7) (n6b max.
10 1,25
16 13
r
25
1,s
0,02
16 28 36
20 36
26 35 39
I I I I -l--
3
2,5
30 42 46 5
25 45 56
35% 48 52
42
55 59
48 62 66 67
55 70 74
78 82
62
78
70 85 90
6
78 95 100
40 78
85 105
...

e
INTERNATIONALE
NORME
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION 4MEX~YHAPOflHAB OPrAHH3AUHII n0 CTAHAAPTH3AlWï *ORGANISATION INTERNATIONALE DE NORMALISATION
Guides de percage et accessoires - Dimensions
0
Jig btishes and accessories for drilling purposes. - Dimensions .
Première édition - 1977-12-15
Réf. no : ISO 4247-1977 (F)
CDU 621.951
Descripteurs : outil, canon de perçage, dimension, spécification de matériel.
Prix basé sur 9 pages

---------------------- Page: 1 ----------------------
AVANT-PROPOS
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partiedu comité technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
Normes internationales par le Conseil de I’ISO.
La Norme internationale ISO 4247 a été élaborée par le comité technique
ISO/TC 29, Petit outi//age, et a été soumise aux comités membres en septembre 1976.
Les comités membres des pays suivants l’ont approuvée :
Royaume-Uni
Afrique du Sud, Rép. d’ Hongrie
Allemagne Inde Suède
Suisse
Australie Irlande
Tchécoslovaquie
Autriche Italie
Turquie
Belgique Japon
U.R.S.S.
Brésil Mexique
U.S.A.
Corée, Rép. de Pays-Bas
Espagne Pologne Yougoslavie
France Roumanie
Aucun comité membre ne l’a désapprouvée.
@ Organisation internationale de normalisation, 1977 l
I mprimé en Suisse

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE ISO 4247-1977 (F)
Guides de percage et accessoires - Dimensions
8
1 OBJET ET DOMAINE D’APPLICATION 3 TOLÉRANCES
Les tolérances définitives à utiliser sont encore en discus-
La présente Norme internationale fixe les dimensions des
sion. Entre-temps, pour les guides d’utilisation générale, il
douilles destinées à être emmanchées dans les gabarits de
est recommandé d’adopter les tolérances suivantes :
perçage, en vue de guider les forets hélicoïdaux, et des
accessoires utilisés avec les guides de perçage amovibles.
3.1 Tolérances pour les douilles de perçage et douilles
Elle est applicable aux éléments suivants :
porte-guide
- douilles de perçage, avec ou sans collerette;
- F7 sur le diamètre d’alésage;
-
n6 sur le diamétre du corps;
- douilles porte-guide, avec ou sans collerette, dont
les dimensions sont reprises de la gamme de dimensions
- hi3 sur le diamètre de collerette.
des douilles de perçage;
3.2 Tolérances pour les guides de perçage amovibles
- guides de perçage amovibles, type ((fixe)) et type
ctà montage rapiden;
- F7 sur le diamétre d’alésage;
- dispositif de retenue des guides amovibles; -
m6 sur le diamètre du corps;
-
- h13 sur le diamètre de tête.
accessoires (tenons d’arrêt, vis d’arrêt et goupilles
d’arrêt).
3.3 Tolérances sur les goupilles d’arrêt
NOTE - Les dispositifs de retenue dkrits au chapitre 6 sont d’usage
général et les comités membres pourront sélectionner l’une de ces
Les goupilles d’arrêt, lorsqu’elles sont nécessaires, doivent
méthodes pour leurs normes nationales.
4
être prévues avec une tolérance m6.
Si on le désire, on peut prévoir des guides de perçage amovibles pour
utilisation soit en ((type fixe)) soit en ((type à montage rapide)), en
Lorsque ce type de retenue est utilisé, le fabricant de guides
prévoyant sur les têtes les caractéristiques nécessaires.
de perçage doit prévoir un trou de positionnement sur la
tête du guide de perçage réalisé avec une tolérance H7 et
positionné suivant les dimensions données au tableau 4.
ZRÉFÉRENCE 3.4 Tolérances sur les alésages des gabarits de perçage
ISO 4248, Guides de perçage - Définitions et nomen- Les douilles de perçage et les douilles porte-guide doivent
cla turc. 1 )
être positionnées dans des alésages ayant une tolérance H7.
1) Actuellement au stade de projet.
1

---------------------- Page: 3 ----------------------
ISO 4247-1977 (F)
4 DOUILLES DE PERCAGE ET DOUILLES PORTE-GUIDE
A
La forme de la gorge de h
dégagement est laide
à l’initiative du fabricant
FIGURE 1 - Douille de perçage ou douille porte-guide - FIGURE 2 - Douille de perçage ou douille porte-guide -
Type avec collerette Type sans collerette
TABLEAU 1 - Djmensions des douilles porte-guide
Valeurs en millimètres
Longueur
Chanfrein
Collerette
Diamatre Diam&tre Chanfrein Concen-
1
sur diamdtre
d’albage du corps - - d’entreet ) tricite
extb-mur
d iamètte hauteur
extta-
d 12 13 V
courte longue
dl d2 11
longue
(F7) max.
(n6) h13) max.
u
8
12 15 10 16 - 1,25 1,5
3 L
10 15 18
12 20 25
12 18 22
I t
/ 1,5 2
15
22 26 4 0,02
16 28 36
18
26 30
22 34
30
20 36 45
26 35 39
2,5 3
30 42 46 5
25 45 56
.
35 48 52
.
42 55 59
48 62 66
30 56 67 3,5
70
55 74
I
62
78 82
1 35 67 78
39 o,w
70 85 90
. 6 / 1
78 95 100
40
78 105 4
85 105 110
I
95 115 120
45
89 112
105 125 130
1) Un rayon peut être utilisé en variante.
2

---------------------- Page: 4 ----------------------
ISO 4247-1977 (F)
TABLEAU 2 - Dimensions des douilles de perçage
Valeurs en millimètres
Diamettes d’akage Longueur
1
1 1 Collerette
dl
Chanfrein
Chanfrein Concen-
sur diametre
d’entrbel )
tr icité
extérieur
extra- extra-
courte courte longue longue
V
13
longue longue
max.
~~ / I
I 1 r 3 1 6 -1
6 6 9 9 - -
1,s 1 W( 5 1 8 1
1
1 0,Ol
2,6 1
...

@ 4247
NORME INTERNATIONALE
'*!e
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION *MEMlYHAPOllHAR OPrAHH3AUHR II0 CTAHnAPTH3AUHH .ORGANISATION INTERNATIONALE DE NORMALISATION
Guides de percage et accessoires - Dimensions
Jig bushes and accessories for drilling purposes - Dimensions
Premiere Mition - 1977-12-15
-
U
-
CDU 621.951 Rbf. no : IS0 4247-1977 (F)
r-
r-
a
-
Descripteun : outil, canon de perçage, dimension, specification de matériel.
r-
O
N
d
8
Prix basé sur 9 pages

---------------------- Page: 1 ----------------------
AVANT-PROPOS
L'ISO (Organisation internationale de normalisation) est une fédération mondiale
d'organismes nationaux de normalisation (comités membres de I'ISO). L'élaboration
des Normes internationales est confiée aux comités techniques de I'ISO. Chaque
comité membre intéressé par une étude a le droit de faire partiedu comité technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I'ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
Normes internationales par le Conseil de I'ISO.
La Norme internationale IS0 4247 a été élaborée par le comité technique
ISO/TC 29, Petit oufilage, et a eté soumise aux comités membres en septembre 1976.
Les comités membres des pays suivants l'ont approuvée :
Royaume-Uni
Afrique du Sud, Rép. d' Hongrie
Suède
Allemagne Inde
Suisse
Australie Irlande
Tchécoslovaquie
Autriche Italie
Turquie
Belgique Japon
U.R.S.S.
Mexique
Brésil
U.S.A.
Pays-Bas
Corée, Rép. de
Yougoslavie
Pologne
Espagne
Roumanie
France
Aucun comité membre ne l'a désapprouvée.
O Organisation internationale de normalisation, 1977 O
lmDrim6 en Suisse

---------------------- Page: 2 ----------------------
I SO 4247 - 1977 ( F)
TABLEAU 2 - Dimensions des douilles de perçage
Valeurs en millimètres
Chanfrein
Concen-
d'entrh1)
tricité
V
13
max.
1
0.01
1.5
2
0.02
3
3.5
0.04
1
3

---------------------- Page: 3 ----------------------
IS0 4247-1977 (F)
5 GUIDES DE PERCAGE AMOVIBLES
5.1 Dimensions générales
La forme de la gorge de
i
dégagement est laissée à
l'initiative du fabricant
FIGURE 3 - Guide de perçage amovible
TABLEAU 3 - Dimensions générales des guides de perçage amovibles
Valeurs en millimètres
Diametres d'alésage
dl
:oncen-
(F7)
tricité
jusqu'à
audessus
et Y
V
de
compris
-
O 4
4 6
6 8
8 10
0.02
10 12
12
15
15
18
18 22
22 26
26 30
30
35
35 42
42
48
0,04
48 55
55 62
62 70
70 78
78 85
1) Un rayon peut itre utilisé en variante.
4

---------------------- Page: 4 ----------------------
IS0 4247-1977 (F)
5.2 Détails d'exécution de la tête
Retenue par tenon d'arrêt
Retenue par goupille d'arrêt
vis d'arrêt
ou et vis d'arrêt
-1-
I
_, 43 ,_
l
Les guides peuvent Ctre prévus avec
une pu les deux possiblités de retenue
w P-4
a) Typefixe b) Type d montage rapide
FIGURE 4 - TBte
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.