Information technology - Keyboard layouts for text and office systems - Part 4: Numeric section

Within the general scope described in ISO/IEC 9995-1, this part of ISO/IEC 9995 specifies the numeric section of a keyboard and the division of that section into zones. It specifies the arrangement, the number, and the location of the keys in the numeric zone ZN0 and in the function zones ZN1 to ZN6 of the numeric section, as well as the allocation of functions to the keys. The numeric zone ZN0 is to be used in keyboards for applications such as text and data processing, general office environment, banking, point of sales (POS), telematic services, telephony apparatus, home electronic systems, numerical control of machinery and equipment, input of personal identification number (PIN), etc. The function zone ZN1 is to be used in keyboards for applications such as data entry, text and data processing, general office environment, etc.

Technologies de l'information -- Disposition des claviers conçus pour la bureautique - Partie 4: Module numérique

L'ISO/CEI 9995 d�finit une structure pour la disposition de tous les claviers alphanum�riques et num�riques parmi le plus vaste �ventail d'applications actuelles et � venir utilisant des claviers. Les fonctions ex�cut�es par les claviers sont group�es en trois cat�gories qui correspondent aux principaux modules physiques du clavier.
L'application de l'ISO/CEI 9995 dans la conception des claviers va fournir une interface utilisateur-machine uniforme et pr�visible en divisant le clavier en zones et modules, et en affectant des fonctions aux touches.
L'ISO/CEI 9995-4:2009 d�crit le module num�rique d'un clavier et la division de ce module en zones. Elle d�finit �galement l'agencement, le nombre et l'emplacement des touches de la zone num�rique ZN0 et des zones de fonction ZN1 � ZN6 du module num�rique, ainsi que l'affectation de fonctions aux touches.
La zone num�rique ZN0 est utilis�e dans les applications comme le traitement de texte et de donn�es, l'environnement bureautique g�n�ral, la banque, les points de vente, les services t�l�matiques, les appareils t�l�phoniques, les syst�mes �lectroniques domestiques, la commande num�rique de machines et d'�quipements, l'entr�e d'un num�ro d'identification personnel (PIN). La zone de fonctions ZN1 est utilis�e dans des applications telles que la saisie, le traitement de donn�es et de texte, et l'environnement bureautique g�n�ral.

Informacijska tehnologija - Razpored tipk na tipkovnici za potrebe pisanja besedil in pisarniških sistemov - 4. del: Numerični del

V okviru splošnega področja uporabe, opisanega v ISO/IEC 9995-1, ta del ISO/IEC 9995 določa numerični del tipkovnice in delitev tega dela na področja. Določa postavitev, število in položaj tipk na numeričnem področju ZN0 in funkcijskih področjih od ZN1 do ZN6 numeričnega dela, kot tudi dodelitev funkcij tipkam. Numerično področje ZN0 se uporablja pri tipkovnicah, ki se uporabljajo pri pisanju besedila in obdelavi podatkov za splošno pisarniško okolje, bančništvo, blagajništvo (POS), telematske storitve, telefonske aparate, domače elektronske sisteme, numerični nadzor strojev in opreme, vnos osebne identifikacijske številke (PIN) itd. Funkcijsko področje ZN1 se uporablja pri tipkovnicah, ki se uporabljajo pri vnosu podatkov, pisanju besedil in obdelavi podatkov za splošno pisarniško okolje itd.

General Information

Status
Published
Public Enquiry End Date
31-May-2010
Publication Date
03-Jun-2010
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Jun-2010
Due Date
08-Aug-2010
Completion Date
04-Jun-2010

Relations

Buy Standard

Standard
ISO/IEC 9995-4:2009 - Information technology -- Keyboard layouts for text and office systems
English language
9 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO/IEC 9995-4:2010
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO/IEC 9995-4:2009 - Technologies de l'information -- Disposition des claviers conçus pour la bureautique
French language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 9995-4
Third edition
2009-10-15


Information technology — Keyboard
layouts for text and office systems —
Part 4:
Numeric section
Technologies de l'information — Disposition des claviers conçus pour la
bureautique —
Partie 4: Module numérique




Reference number
ISO/IEC 9995-4:2009(E)
©
ISO/IEC 2009

---------------------- Page: 1 ----------------------
ISO/IEC 9995-4:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO/IEC 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2009 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 9995-4:2009(E)
Contents Page
Foreword .iv
1 Scope.1
2 Conformance .1
3 Normative references.1
4 Terms and definitions .1
5 Arrangement and location.2
6 Division into zones.2
7 Arrangement, location and functions of the keys in the numeric zone.2
8 Allocation of functions to the keys of the numeric zone .3
8.1 The "1-2-3" layout.3
8.2 The "7-8-9" layout.5
9 Arrangement, location and functions of the function zone ZN1 .7
10 Allocation of functions to the keys of the function zone ZN1 .8

© ISO/IEC 2009 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 9995-4:2009(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 9995-4 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 35, User interfaces.
This third edition cancels and replaces the second edition (ISO/IEC 9995-4:2002), which has been technically
revised. The main modification is:
⎯ fewer zones.
ISO/IEC 9995 consists of the following parts, under the general title Information technology — Keyboard
layouts for text and office systems:
⎯ Part 1: General principles governing keyboard layouts
⎯ Part 2: Alphanumeric section
⎯ Part 3: Complementary layouts of the alphanumeric zone of the alphanumeric section
⎯ Part 4: Numeric section
⎯ Part 5: Editing and function section
⎯ Part 7: Symbols used to represent functions
⎯ Part 8: Allocation of letters to the keys of a numeric keypad

iv © ISO/IEC 2009 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO/IEC 9995-4:2009(E)

Information technology — Keyboard layouts for text and office
systems —
Part 4:
Numeric section
1 Scope
Within the general scope described in ISO/IEC 9995-1, this part of ISO/IEC 9995 specifies the numeric
section of a keyboard and the division of that section into zones. It specifies the arrangement, the number,
and the location of the keys in the numeric zone ZN0 and in the function zones ZN1 to ZN6 of the numeric
section, as well as the allocation of functions to the keys.
The numeric zone ZN0 is to be used in keyboards for applications such as text and data processing, general
office environment, banking, point of sales (POS), telematic services, telephony apparatus, home electronic
systems, numerical control of machinery and equipment, input of personal identification number (PIN), etc.
The function zone ZN1 is to be used in keyboards for applications such as data entry, text and data
processing, general office environment, etc.
NOTE Certain of these applications are under the responsibility of the ITU-T.
2 Conformance
Equipment is in conformance with this part of ISO/IEC 9995 if it meets the requirements of Clauses 5, 6, 7, 8,
9, 10 and either 8.1, 8.2.
3 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO/IEC 9995-1, Information technology — Keyboard layouts for text and office systems — Part 1: General
principles governing keyboard layouts
ITU-T Recommendation E.161, Arrangement of digits, letters and symbols on telephones and other devices
that can be used for gaining access to a telephone network
4 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO/IEC 9995-1 apply.
© ISO/IEC 2009 – All rights reserved 1

---------------------- Page: 5 ----------------------
ISO/IEC 9995-4:2009(E)
5 Arrangement and location
The numeric section is generally a rectangular arrangement of keys located to the right or to the left of the
alphanumeric section and the cursor key zone of the editing and function section and below a part of the
editing and function section, see ISO/IEC 9995-1.
6 Division into zones
The numeric section is divided into zones as illustrated in Figure 1.

NOTE Not drawn to scale — all lines are only indicative.
Figure 1 — Division of the numeric section into zones
7 Arrangement, location and functions of the keys in the numeric zone
The keys shall be arranged in the numeric zone ZN0 and be located as illustrated in Figure 2.
The functions to be allocated to the keys of the numeric zone are the digits zero to nine, the decimal
separator, and two telematic functions.
2 © ISO/IEC 2009 – All rights reserved

---------------------- Page: 6 ----------------------
ISO/IEC 9995-4:2009(E)

NOTE Not drawn to scale — all lines are only indicative.
Figure 2 — Arrangement and location of the keys in the numeric zone
8 Allocation of functions to the keys of the numeric zone
The ten digits zero to nine shall be alloca
...

SLOVENSKI STANDARD
SIST ISO/IEC 9995-4:2010
01-julij-2010
1DGRPHãþD
SIST ISO/IEC 9995-4:2008
,QIRUPDFLMVNDWHKQRORJLMD5D]SRUHGWLSNQDWLSNRYQLFL]DSRWUHEHSLVDQMDEHVHGLO
LQSLVDUQLãNLKVLVWHPRYGHO1XPHULþQLGHO
Information technology - Keyboard layouts for text and office systems - Part 4: Numeric
section
Technologies de l'information -- Disposition des claviers conçus pour la bureautique -
Partie 4: Module numérique
Ta slovenski standard je istoveten z: ISO/IEC 9995-4:2009
ICS:
35.180 Terminalska in druga IT Terminal and other
periferna oprema IT peripheral equipment
SIST ISO/IEC 9995-4:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO/IEC 9995-4:2010

---------------------- Page: 2 ----------------------

SIST ISO/IEC 9995-4:2010

INTERNATIONAL ISO/IEC
STANDARD 9995-4
Third edition
2009-10-15


Information technology — Keyboard
layouts for text and office systems —
Part 4:
Numeric section
Technologies de l'information — Disposition des claviers conçus pour la
bureautique —
Partie 4: Module numérique




Reference number
ISO/IEC 9995-4:2009(E)
©
ISO/IEC 2009

---------------------- Page: 3 ----------------------

SIST ISO/IEC 9995-4:2010
ISO/IEC 9995-4:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO/IEC 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2009 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO/IEC 9995-4:2010
ISO/IEC 9995-4:2009(E)
Contents Page
Foreword .iv
1 Scope.1
2 Conformance .1
3 Normative references.1
4 Terms and definitions .1
5 Arrangement and location.2
6 Division into zones.2
7 Arrangement, location and functions of the keys in the numeric zone.2
8 Allocation of functions to the keys of the numeric zone .3
8.1 The "1-2-3" layout.3
8.2 The "7-8-9" layout.5
9 Arrangement, location and functions of the function zone ZN1 .7
10 Allocation of functions to the keys of the function zone ZN1 .8

© ISO/IEC 2009 – All rights reserved iii

---------------------- Page: 5 ----------------------

SIST ISO/IEC 9995-4:2010
ISO/IEC 9995-4:2009(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 9995-4 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 35, User interfaces.
This third edition cancels and replaces the second edition (ISO/IEC 9995-4:2002), which has been technically
revised. The main modification is:
⎯ fewer zones.
ISO/IEC 9995 consists of the following parts, under the general title Information technology — Keyboard
layouts for text and office systems:
⎯ Part 1: General principles governing keyboard layouts
⎯ Part 2: Alphanumeric section
⎯ Part 3: Complementary layouts of the alphanumeric zone of the alphanumeric section
⎯ Part 4: Numeric section
⎯ Part 5: Editing and function section
⎯ Part 7: Symbols used to represent functions
⎯ Part 8: Allocation of letters to the keys of a numeric keypad

iv © ISO/IEC 2009 – All rights reserved

---------------------- Page: 6 ----------------------

SIST ISO/IEC 9995-4:2010
INTERNATIONAL STANDARD ISO/IEC 9995-4:2009(E)

Information technology — Keyboard layouts for text and office
systems —
Part 4:
Numeric section
1 Scope
Within the general scope described in ISO/IEC 9995-1, this part of ISO/IEC 9995 specifies the numeric
section of a keyboard and the division of that section into zones. It specifies the arrangement, the number,
and the location of the keys in the numeric zone ZN0 and in the function zones ZN1 to ZN6 of the numeric
section, as well as the allocation of functions to the keys.
The numeric zone ZN0 is to be used in keyboards for applications such as text and data processing, general
office environment, banking, point of sales (POS), telematic services, telephony apparatus, home electronic
systems, numerical control of machinery and equipment, input of personal identification number (PIN), etc.
The function zone ZN1 is to be used in keyboards for applications such as data entry, text and data
processing, general office environment, etc.
NOTE Certain of these applications are under the responsibility of the ITU-T.
2 Conformance
Equipment is in conformance with this part of ISO/IEC 9995 if it meets the requirements of Clauses 5, 6, 7, 8,
9, 10 and either 8.1, 8.2.
3 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO/IEC 9995-1, Information technology — Keyboard layouts for text and office systems — Part 1: General
principles governing keyboard layouts
ITU-T Recommendation E.161, Arrangement of digits, letters and symbols on telephones and other devices
that can be used for gaining access to a telephone network
4 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO/IEC 9995-1 apply.
© ISO/IEC 2009 – All rights reserved 1

---------------------- Page: 7 ----------------------

SIST ISO/IEC 9995-4:2010
ISO/IEC 9995-4:2009(E)
5 Arrangement and location
The numeric section is generally a rectangular arrangement of keys located to the right or to the left of the
alphanumeric section and the cursor key zone of the editing and function section and below a part of the
editing and function section, see ISO/IEC 9995-1.
6 Division into zones
The numeric section is divided into zones as illustrated in Figure 1.

NOTE Not drawn to scale — all lines are only indicative.
Figure 1 — Division of the numeric section into zones
7 Arrangement, location and functions of the keys in the numeric zone
The keys shall be arranged in the numeric zone ZN0 and be located as illustrated in Figure
...

NORME ISO/CEI
INTERNATIONALE 9995-4
Troisième édition
2009-10-15


Technologies de l'information —
Disposition des claviers conçus pour la
bureautique —
Partie 4:
Module numérique
Information technology — Keyboard layouts for text and office
systems —
Part 4: Numeric section




Numéro de référence
ISO/CEI 9995-4:2009(F)
©
ISO/CEI 2009

---------------------- Page: 1 ----------------------
ISO/CEI 9995-4:2009(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.


DOCUMENT PROTÉGÉ PAR COPYRIGHT


©  ISO/CEI 2009
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse

ii © ISO/CEI 2009 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO/CEI 9995-4:2009(F)
Sommaire Page
Avant-propos .iv
1 Domaine d'application .1
2 Conformité.1
3 Références normatives.1
4 Termes et définitions .1
5 Agencement et emplacement.2
6 Division en zones .2
7 Agencement, emplacement et fonctions des touches de la zone numérique .2
8 Affectation de fonctions aux touches de la zone numérique .3
8.1 Disposition «1-2-3».3
8.2 Disposition «7-8-9».5
9 Agencement, emplacement et fonctions de la zone de fonction ZN1 .7
10 Affectation de fonctions aux touches de la zone de fonction ZN1 .9

© ISO/CEI 2009 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO/CEI 9995-4:2009(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) et la CEI (Commission électrotechnique internationale)
forment le système spécialisé de la normalisation mondiale. Les organismes nationaux membres de l'ISO ou
de la CEI participent au développement de Normes internationales par l'intermédiaire des comités techniques
créés par l'organisation concernée afin de s'occuper des domaines particuliers de l'activité technique. Les
comités techniques de l'ISO et de la CEI collaborent dans des domaines d'intérêt commun. D'autres
organisations internationales, gouvernementales et non gouvernementales, en liaison avec l'ISO et la CEI
participent également aux travaux. Dans le domaine des technologies de l'information, l'ISO et la CEI ont créé
un comité technique mixte, l'ISO/CEI JTC 1.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale du comité technique mixte est d'élaborer les Normes internationales. Les projets de
Normes internationales adoptés par le comité technique mixte sont soumis aux organismes nationaux pour
vote. Leur publication comme Normes internationales requiert l'approbation de 75 % au moins des
organismes nationaux votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO et la CEI ne sauraient être tenues pour
responsables de ne pas avoir identifié de tels droits de propriété et averti de leur existence.
L'ISO/CEI 9995-4 a été élaborée par le comité technique mixte ISO/CEI JTC 1, Technologies de l'information,
sous-comité SC 35, Interfaces utilisateur.
Cette troisième édition annule et remplace la deuxième édition (ISO/CEI 9995-4:2002), qui a fait l'objet d'une
révision technique. La principale modification consiste en ce qui suit:
⎯ moins de zones.
L'ISO/CEI 9995 comprend les parties suivantes, présentées sous le titre général Technologies de
l'information — Disposition des claviers conçus pour la bureautique:
⎯ Partie 1: Principes généraux pour la disposition des claviers
⎯ Partie 2: Module alphanumérique
⎯ Partie 3: Dispositions complémentaires de la zone alphanumérique du module alphanumérique
⎯ Partie 4: Module numérique
⎯ Partie 5: Module d'édition et de fonctions
⎯ Partie 7: Symboles employés pour la représentation de fonctions
⎯ Partie 8: Affectation de lettres aux touches d'un pavé numérique

iv © ISO/CEI 2009 – Tous droits réservés

---------------------- Page: 4 ----------------------
NORME INTERNATIONALE ISO/CEI 9995-4:2009(F)

Technologies de l'information — Disposition des claviers
conçus pour la bureautique —
Partie 4:
Module numérique
1 Domaine d'application
Dans le domaine d'application général de l'ISO/CEI 9995-1, la présente partie de l'ISO/CEI 9995 décrit le
module numérique d'un clavier et la division de ce module en zones. Elle définit également l'agencement, le
nombre et l'emplacement des touches de la zone numérique ZN0 et des zones de fonction ZN1 à ZN6 du
module numérique, ainsi que l'affectation de fonctions aux touches.
La zone numérique ZN0 est utilisée dans les applications comme le traitement de texte et de données,
l'environnement bureautique général, la banque, les points de vente, les services télématiques, les appareils
téléphoniques, les systèmes électroniques domestiques, la commande numérique de machines et
d'équipements, l'entrée d'un numéro d'identification personnel (PIN), etc.
La zone de fonctions ZN1 est utilisée dans des applications telles que la saisie, le traitement de données et
de texte, l'environnement bureautique général, etc.
NOTE Certaines de ces applications se trouvent sous la responsabilité de l'UIT-T.
2 Conformité
L'équipement est conforme à la présente partie de l'ISO/CEI 9995 s'il répond aux exigences des Articles 5, 6,
7, 8, 9, 10 et de 8.1 ou 8.2.
3 Références normatives
Les documents de référence suivants sont indispensables pour l'application du présent document. Pour les
références datées, seule l'édition citée s'applique. Pour les références non datées, la dernière édition du
document de référence s'applique (y compris les éventuels amendements).
ISO/CEI 9995-1, Technologies de l'information — Disposition des claviers conçus pour la bureautique —
Partie 1: Principes généraux pour la disposition des claviers
Recommandation UIT T E.161, Disposition des chiffres, des lettres et des symboles sur les appareils
téléphoniques et les autres dispositifs permettant d'accéder au réseau téléphonique
4 Termes et définitions
Pour les besoins du présent document, les termes et définitions donnés dans l'ISO/CEI 9995-1 s'appliquent.
© ISO/CEI 2009 – Tous droits réservés 1

---------------------- Page: 5 ----------------------
ISO/CEI 9995-4:2009(F)
5 Agencement et emplacement
Le module numérique est généralement un ensemble de touches rectangulaire situé à la droite ou à la
gauche du modules alphanumérique et de la zone de déplacement du curseur du module d’édition et de
fonctions, et au-dessous d'une partie du module d’édition et de fonctions, voir l'ISO/CEI 9995-1.
6 Division en zones
Le module numérique est divisé en zones comme illustré à la Figure 1.

NOTE Échelle non représentative — Les traits sont donnés à titre indicatif uniquement.
Figure 1 — Division du module numérique en zones
7 Agencement, emplacement et fonctions des touches de la zone numérique
Les touches doivent se situer dans la zone numérique ZN0 comme indiqué à la Figure 2.
Les fonctions à affecter aux touches de la zone numérique sont les chiffres 0 à 9, le séparateur décimal et
deux fonctions télématiques.
2 © ISO/CEI 2009 – Tous droits réservés

---------------------- Page: 6 ----------------------
ISO/CEI 9995-4:2009(F)

NOTE Échelle non représentative — Les traits sont donnés à titre indicatif uniquement.
Figure 2 — Agencement et emplacement des touches de la zone numérique
8 Affectation de fonctions aux touches de la zone numérique
Les fonctions à affecter aux dix touches de la zone numérique ZN0 sont les chiffres 0 à 9. La disposition
«1-2-3» (voir 8.1) ou «7-8-9» (voir 8.2) peut être utilisée. La disposition «1-2-3» est re
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.