SIST EN 1271:2014

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Spielfeldgeräte - Volleyballgeräte - Funktionelle und sicherheitstechnische Anforderungen, PrüfverfahrenÉquipements de jeux - Équipements de volley-ball - Exigences fonctionnelles et de sécurité, méthodes d'essaiPlaying field equipment - Volleyball equipment - Functional and safety requirements, test methods97.220.30Oprema za dvoranske športeIndoor sports equipmentICS:Ta slovenski standard je istoveten z:EN 1271:2014SIST EN 1271:2014en,fr,de01-december-2014SIST EN 1271:2014SLOVENSKI
STANDARDSIST EN 1271:2005/AC:2006SIST EN 1271:20051DGRPHãþD



SIST EN 1271:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1271
October 2014 ICS 97.220.30; 97.220.40 Supersedes EN 1271:2004English Version
Playing field equipment - Volleyball equipment - Functional and safety requirements, test methods
Équipements de jeux - Équipements de volley-ball - Exigences fonctionnelles et de sécurité, méthodes d'essai Spielfeldgeräte - Volleyballgeräte - Funktionelle und sicherheitstechnische Anforderungen, Prüfverfahren This European Standard was approved by CEN on 6 September 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1271:2014 ESIST EN 1271:2014



EN 1271:2014 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Requirements .4 3.1 Tolerances .4 3.2 Classification .4 3.3 Dimensions .5 3.4 Material .8 3.4.1 Posts .8 3.4.2 Net .9 3.4.3 Antenna .9 3.5 Design .9 3.5.1 Posts .9 3.5.2 Net .9 3.5.3 Antennae . 10 3.5.4 Ground sockets . 10 4 Safety requirements . 10 4.1 General . 10 4.2 Posts, tensioning devices, rope and rope attachments . 10 4.3 Post pads . 11 4.4 Base assembly . 11 5 Test methods . 11 5.1 General . 11 5.2 Testing of posts, tensioning devices, rope and rope attachments . 11 6 Instructions for use . 14 7 Marking . 15 Annex A (informative)
Example of foundation . 16 Bibliography . 17
SIST EN 1271:2014



EN 1271:2014 (E) 3 Foreword This document (EN 1271:2014) has been prepared by Technical Committee CEN/TC 136 “Sports, playground and other recreational facilities and equipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2015 and conflicting national standards shall be withdrawn at the latest by April 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. NOTE It is planned that the standard will be listed in the Official Journal of the European Union, therefore a standardization request has been launched to the European Commission (GSPD Committee). This document supersedes EN 1271:2004. In relation to EN 1271:2004, the following main amendments have been made: a) scope was modified regarding umpire stand; b) sitting volleyball was considered; c) dimensions were modified; d) material requirements were modified; e) net breaking strength requirements were modified; f) breaking forces of ropes/net lines were modified; g) breaking forces for the top net line were modified; h) breaking forces for the net tape were deleted; i) antennae requirement regarding colouring was modified; j) safety requirements for the posts, tensioning devices, rope and rope attachments were modified; k) safety requirements for post pads detailed; l) test method and test forces for the posts, tensioning devices, rope and rope attachments were modified (overall test); m) instruction for use was modified; n) marking was detailed. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 1271:2014



EN 1271:2014 (E) 4 1 Scope This European Standard specifies the functional requirements (see Clause 3) and the safety requirements (see Clause 4) for volleyball equipment. This European Standard is applicable to 2 types and 5 classes of volleyball equipment (see 3.2) which are used indoors and outdoors. This European Standard is not applicable to beach volleyball. This European Standard does not cover umpire stand (for the 1st official referee). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 913:2008, Gymnastic equipment
EN ISO 1806,
EN ISO 2307,
ISO 3108, pteel wire ropes for general purposes — aetermination of actual breaking load 3 Requirements 3.1 Tolerances If not otherwise specified in this standard, a tolerance of 2 % applies. 3.2 Classification Volleyball equipment shall be classified by the design (types) and the intended level of the sport (classes) as shown in Table 1 and Table 2. Table 1 — Types Type Description Example 1 with ground sockets/fixings Figure 1 2 with floor fixings Figure 2 SIST EN 1271:2014



EN 1271:2014 (E) 5 Table 2 — Classes Class Description A top level competitions a B club level b competitions C practice and school sports D sitting top level competitions a E sitting for practice and school sports a If top level competitions are played under FIVB rules, then refer to FIVB rules. b If
...