SIST EN 61646:2008

Oznaka standarda: SIST EN 61646:2008
Koda projekta: 20764
Organizacija: SIST
Naslov (angleški): Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval
Naslov (slovenski): Tankoplastni prizemni fotonapetostni (PV) moduli - Ocena zasnove in odobritev tipa (IEC 61646:2008)
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 20% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 61646:2008 angleški jezik Active SIST-I: 71.00 EUR
PDF
Papir
Tehnični odbor: PVS - Fotonapetostni sistemi
ICS: 27.160
Status: Objavljen
Objavljen: 01-dec-2008
Refer. št. objave: Sporočila 2008-12
Razveljavitev: 01-apr-2020
Referenca razveljavitve: Sporocila 2020-04
Področje projekta (angleško): This International Standard lays down requirements for the design qualification and type approval of terrestrial, thin-film photovoltaic modules suitable for long-term operation in general open-air climates as defined in IEC 60721-2-1. This standard is intended to apply to all terrestrial flat plate module materials not covered by IEC 61215. The test sequence is derived from IEC 61215 for the design qualification and type approval of terrestrial crystalline silicon PV modules. However, it no longer relies on meeting a plus/minus criterion before and after each test, but rather on meeting a specified percentage of the rated minimum power after all of the tests have been completed and the modules have been lightsoaked. This eliminates the technology-specific preconditioning necessary to accurately measure the changes caused by the test. This standard does not apply to modules used with concentrators. The object of this test sequence is to determine the electrical and thermal characteristics of the module and to show, as far as possible within reasonable constraints of cost and time, that the module is capable of withstanding prolonged exposure in climates described in the scope. The actual life expectancy of modules so qualified will depend on their design, their environment and the conditions under which they are operated.
Povezava na standarde
Povezava Ime Datum
Nadomeščen z SIST EN 61215-1-2:2017 - Prizemni fotonapetostni (PV) moduli - Ocena zasnove in odobritev tipa - 1-2. del: Posebne zahteve za preskušanje fotonapetostnih modulov iz tankoslojnega kadmij-telurja (CdTe) 01-jul-2017
Nadomeščen z SIST EN 61215-1-4:2017 - Prizemni fotonapetostni (PV) moduli - Ocena zasnove in odobritev tipa - 1-4. del: Posebne zahteve za preskušanje fotonapetostniih modulov s tankoslojno zasnovo iz Cu(In,Ga)(S,Se)2 01-jul-2017
Nadomeščen z SIST EN 61215-1-3:2017 - Prizemni fotonapetostni (PV) moduli - Ocena zasnove in odobritev tipa - 1-3. del: Posebne zahteve za preskušanje fotonapetostnih modulov iz tankoslojnega amorfnega silicija 01-jul-2017
Nadomešča SIST EN 61646:2001 - Tankoplastni prizemni fotonapetostni (PV) moduli – Ocena zasnove in odobritev tipa 13-maj-2010
Revidiran SIST EN 61215-2:2017 - Prizemni fotonapetostni (PV) moduli - Ocena zasnove in odobritev tipa - 2. del: Preskusni postopki 11-jul-2017


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi