LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft - Installation requirements

This European Standard specifies the requirements for the installation of automotive LPG components that comply with EN 12805 and EN 12806 in boats, yachts and other craft. These requirements are to ensure safe operation of such components.

Flüssiggas-(LPG-)Geräte und Ausrüstungsteile - Flüssiggas-(LPG-)Antriebssysteme für Boote, Yachten und andere Wasserfahrzeuge - Anforderungen an die Installation

Diese Europäische Norm legt Anforderungen an LPG-Antriebssysteme von Booten fest. Diese Norm behandelt Wasserfahrzeuge der Auslegungskategorien C und D nach Richtlinie 94/25/EG.
Diese Anforderungen sollen den sicheren Betrieb derartiger, auf Booten installierter Bauteile sicherstellen.

Equipements pour gaz de pétrole liquéfié et leurs accessoires - Systemes de propulsion GPL des bateaux, yachts et autres navires - Exigences d'installation

La présente norme européenne spécifie les exigences d’installation relatives aux systèmes de propulsion GPL
des bateaux. La présente norme traite des navires qui relèvent des catégories C et D de la Directive 94/25.

Oprema in pribor za utekočinjeni naftni plin (UNP) - Pogonski sistemi na UNP za čolne, jahte in druga plovila - Zahteve za vgradnjo

General Information

Status
Withdrawn
Publication Date
04-Dec-2008
Withdrawal Date
08-Aug-2012
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
08-Aug-2012
Due Date
31-Aug-2012
Completion Date
09-Aug-2012

Relations

Buy Standard

Standard
EN 15609:2009
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k prEN 15609:2008
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Flüssiggas-(LPG-)Geräte und Ausrüstungsteile - Flüssiggas-(LPG-)Antriebssysteme für Boote, Yachten und andere Wasserfahrzeuge - Anforderungen an die InstallationEquipements pour gaz de pétrole liquéfié et leurs accessoires - Systemes de propulsion GPL des bateaux, yachts et autres navires - Exigences d'installationLPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft - Installation requirements47.020.01Splošni standardi v zvezi z ladjedelništvom in konstrukcijami na morjuGeneral standards related to shipbuilding and marine structures23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehiclesICS:Ta slovenski standard je istoveten z:EN 15609:2008SIST EN 15609:2009en,fr,de01-januar-2009SIST EN 15609:2009SLOVENSKI
STANDARD



SIST EN 15609:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15609November 2008ICS 47.020.20; 47.080 English VersionLPG equipment and accessories - LPG propulsion systems forboats, yachts and other craft - Installation requirementsEquipements pour gaz de pétrole liquéfié et leursaccessoires - Systèmes de propulsion GPL des bateaux,yachts et autres navires - Exigences d'installationFlüssiggas-(LPG-)Geräte und Ausrüstungsteile -Flüssiggas-(LPG-)Antriebssysteme für Boote, Jachten undandere Wasserfahrzeuge - Anforderungen an dieInstallationThis European Standard was approved by CEN on 25 October 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15609:2008: ESIST EN 15609:2009



EN 15609:2008 (E) 2 Contents Page Foreword.4 Introduction.5 1 Scope.6 2 Normative references.6 3 Terms and definitions.7 4 Components.8 4.1 General provisions.8 4.2 LPG container(s).8 4.2.1 General provisions.8 4.2.2 Cylinders.8 4.2.3 Fixed container.9 4.3 Fuel system components.9 5 Installation requirements.11 5.1 General requirements.11 5.2 Installer.11 5.3 Other connections to the fuel system.11 5.4 Modifications to the structure of the craft.12 5.5 Container installation.12 5.5.1 General.12 5.5.2 Fixed containers.13 5.5.3 Cylinders.13 5.5.4 Container lockers.14 5.5.5 Installation of more than one container.14 5.6 Components on or in the fixed container.14 5.6.1 General requirements.14 5.6.2 Remote-controlled service valve with excess flow valve on the container.15 5.6.3 Pressure relief valve.15 5.6.4 Filler valve.15 5.6.5 80 % stop valve.15 5.6.6 Level indicator.15 5.6.7 Gas-tight housing.15 5.6.8 Pressure relief device.15 5.7 Other components.16 5.7.1 Gas pipes tubes and hoses.16 5.7.2 Gas connections between components of the LPG-system.17 5.7.3 Remote-controlled shut-off valve.18 5.7.4 Filling unit.18 5.8 Electrical installation.19 5.8.1 General.19 5.8.2 Battery position.19 5.9 Fuel selection system.20 5.10 Gas detection.20 5.10.1 General.20 5.10.2 Alarm position.20 5.10.3 Sensors position.20 5.11 Forced ventilation.21 5.11.1 General.21 5.11.2 Purging of machinery space.21 5.11.3 Position of venting.21 SIST EN 15609:2009



EN 15609:2008 (E) 3 5.11.4 Fan sizing.21 6 Owner's manual.21 7 Commissioning.21 7.1 Tightness test.21 7.2 LPG filling of the container and the system.22 7.3 Fuel system test.22 7.4 Water trial.22 Annex A (normative)
Fixing requirements for containers with a capacity up to and including 150 litres.23 A.1 General requirements.23 A.2 Container frame.24 Annex B (normative)
Fixing requirements for containers with a capacity over 150 litres.25 B.1 General requirements.25 B.2 Container frame.25 Annex C (normative)
Cylinder fixing requirements.26 C.1 General requirements.26 C.2 Cylinder frame.26 Annex D (normative)
Instructions to be included in the owner's manual.29 D.1 General requirements.29 D.2 Availability of LPG supply.29 D.3 Position and operation of emergency shut-off valve.29 D.4 Safety instructions to be included in the manual.29 D.5 Instruction for the normal use of the LPG system.30 D.5.1 Filling of the LPG system.30 D.5.2 Switching procedure (for bi-fuelled craft).30 D.5.3 Opening and closing of manual valves (in case of several containers).30 D.5.4 Level indicator (in case of fixed container).30 D.5.5 Maintenance and inspection.30 D.5.6 Defects and repairs.31 D.5.7 Storage, repair and maintenance.31 D.5.8 Disposal.31 D.5.9 Hot work.31 Annex E (informative)
Installation of more than one container.32 Annex F (informative)
Example of installation certificate.33 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 94/25/EC amended by EU Directive 2003/44/EC.34 Bibliography.35
SIST EN 15609:2009



EN 15609:2008 (E) 4 Foreword This document (EN 15609:2008) has been prepared by Technical Committee CEN/TC 286 “Liquefied petroleum gas equipment and accessories”, the secretariat of which is held by NSAI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the latest by May 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 94/25/EC. For relationship with the EU Directive, see informative Annex ZA, which is an integral part of this document. Annexes A, B, C and D are normative. Annexes E and F are informative. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 15609:2009



EN 15609:2008 (E) 5 Introduction This European Standard specifies requirements for the installation of equipment for the use of Liquefied Petroleum Gas (hereafter referred to as LPG) in automotive propulsion systems. This European Standard calls for the use of substances and procedures that can be injurious to health if adequate precautions are not taken. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety at any stage. It has been assumed in the drafting of this European Standard that the execution of its provisions is entrusted to appropriately qualified and experienced people.
This standard is based on EN 12979 [2]. SIST EN 15609:2009



EN 15609:2008 (E) 6
1 Scope This European Standard specifies the requirements for the LPG propulsion systems on craft with hull lengths less than or equal to 24 meters, see Directive 94/25. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1442, LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction EN 12805, Automotive LPG components – Containers EN 12806:2003, Automotive liquefied petroleum gas components – Other than containers EN 12816, Transportable refillable steel and aluminium LPG cylinders – Disposal EN 12864, Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures EN 13109, LPG tanks – Disposal EN 13110, Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction EN 14140, LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction EN 14427, Transportable refillable fully wrapped composite cylinders for Liquefied Petroleum Gases - Design and construction EN 28846, Small craft - Electrical devices - Protection against ignition of surrounding flammable gases (ISO 8846:1990) EN 60529, Degrees of protection provided by enclosures (IP-code) (IEC 60529:1989) EN ISO 898-1:1999, Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999) EN ISO 10133, Small craft – Electrical systems – Extra-low-voltage d.c. installations (ISO 10133:2000) EN ISO 10239, Small craft – Liquefied petroleum gas (LPG) systems (ISO 10239:2008) EN ISO 10240, Small craft – Owner’s manual (ISO 10240:2004) EN ISO 11105, Small craft – Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:1997) EN ISO 11591, Small craft, engine-driven - Field of vision from helm position (ISO 11591:2000) EN ISO 12217 (all parts), Small craft – Stability and buoyancy assessment and categorization SIST EN 15609:2009



EN 15609:2008 (E) 7 EN ISO 13297, Small craft – Electrical systems – Alternating current installations (ISO 13297:2000) ISO 630, Structural steels –Plates, wide flats, bars, sections and profiles ISO 20826, Automotive LPG components – Containers 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 12806:2003 and the following apply. 3.1 accessible capable of being reached for inspection, removal or maintenance without removal of permanent craft structures NOTE Hatches are not regarded as permanent craft structures in this sense, even if tools such as wrenches or screwdrivers are needed to open them. 3.2 container housing ventilated enclosure intended solely for storage of one or more LPG containers, pressure regulators and safety devices and located on the exterior of the boat where any leakage would flow overboard 3.3 container locker gas-tight (to the craft) enclosure with an overboard drain, where any leakage would flow overboard, intended solely for storage of one or more LPG containers in a cockpit or recessed into the craft 3.4 cylinder transportable, refillable container with a water capacity from 0,5 l up to and including 150 l 3.8 filler valve valve system for liquid fill service
3.9 fixed container LPG tank permanently installed to the structure of the craft 3.11 gas detection detection of the presence of LPG outside its containment system 3.13 installer person or organisation, who by qualification, training, experience and resources can assume technical responsibility for the installation of the LPG propulsion system 3.15 Liquefied Petroleum Gas (LPG) mixture of predominantly butane or propane with traces of other hydrocarbon gases classified in accordance with UN number 1965, hydrocarbon gases mixture, liquefied, NOS or UN number 1075, petroleum gases, liquefied NOTE 1 In some countries, UN numbers 1011 and 1978 may also be designated LPG. NOTE 2 For automotive LPG specification, see EN 589 [1].
SIST EN 15609:2009



EN 15609:2008 (E) 8 3.17 permanently installed securely fastened so that tools have to be used for removal 3.21 readily accessible capable of being reached for operation, inspection or maintenance without the removal of any craft structure or the use of any tools or the removal of any item of portable equipment stowed in places intended for storage of portable equipment such as lockers, drawers or shelves 3.24 ventilation system assembly of ducts and an electrical ventilator that is capable of extracting hydrocarbons from the inside of the craft and allowing the entrance of fresh air 3.25 venting tube duct that connects the gas-tight housing to the atmosphere outside of the craft 4 Components 4.1 General provisions Individual components of the system, and the system as a whole, shall be designed to withstand the combined conditions of pressure, vibration, shocks, corrosion and movement encountered under normal operation. All materials used in LPG systems shall be compatible with LPG and with other liquids or compounds with which it may come into contact under normal operating conditions, e.g. grease, lubricating oil, bilge solvents, fresh and sea water. 4.2 LPG container(s) 4.2.1 General provisions The LPG container(s) shall be protected from corrosion in the marine environment by an adequate surface treatment system, or be constructed from materials suitable for the marine environment. For the purpose of this standard, two types of LPG containers are identified:  cylinders; and  fixed containers 4.2.2 Cylinders LPG cylinders may be used in the liquid or gas/vapour phase to fuel the engine of a craft depending on the choice of technology and the required power. The cylinders used on craft shall comply with one of the following:  EN 13110;  EN 1442;  EN 14140; SIST EN 15609:2009



EN 15609:2008 (E) 9  EN 14427; or
 an equivalent standard 4.2.3 Fixed container 4.2.3.1 General A fixed container shall comply with EN 12805, ISO 20826 or an equivalent standard. 4.2.3.2 Components fitted to the fixed container The container shall be equipped with the following components, which may be either separate or combined (e.g. multivalve): a) 80 % stop valve b) filler valve c) level indicator d) pressure relief valve or pressure relief device e) remotely controlled service valve with excess flow valve The container may be equipped with a: 1) gas-tight housing 2) power supply bushing for actuators/LPG fuel pump 3) LPG fuel pump inside the container 4) non-return valve All components fitted to the container shall comply with EN 12806. The filler valve shall incorporate a double non-return valve. The non-return valve in the filler valve shall comply with Annex G of EN 12806. 4.3 Fuel system components The following components of the fuel system, where used, shall comply with EN 12806 and shall be suitable for use in the marine environment: a) pressure regulator/vaporizer b) shut-off valve c) gas injection device or injector d) gas mixing unit e) gas dosage unit f) flexible fuel hoses and gas pipes SIST EN 15609:2009



EN 15609:2008 (E) 10 g) hydrostatic relief valve h) LPG filter unit i) pressure and/or temperature sensor j) service coupling k) electronic control unit l) fuel rail m) filler unit n) fuel pump The materials of the vaporizer, which are in contact with the engine coolant, shall be compatible with this coolant. The vaporiser shall be designed to contain a coolant pressure of at least 200 kPa. Additional equipment required for the effective operation of the engine, not covered by EN 12806, shall only be installed in parts of the LPG system where the pressure is less than 20 kPa. SIST EN 15609:2009



EN 15609:2008 (E) 11 5 Installation requirements 5.1 General requirements  Fuel supply system, with the exception of a cylinder(s), shall be permanently installed  All parts of the system shall be securely fastened  All valves and other components intended to be operated or observed during normal operation of the craft, or for emergency purposes, shall be readily accessible  All other components of the system shall be accessible  No component of the fuel system shall be located within 100 mm of the exhaust or similar heat source, unless adequate shielding against heat is provided  Clearance between dry exhaust components and an LPG container shall not be less than 250 mm, unless an equivalent thermal barrier is provided  Fuel containers and components of fuel systems shall not be installed directly above batteries, unless the batteries are protected against the effects of fuel leakage  Fuel system shall function in such a manner that the pressure for which it has been designed and approved cannot be exceeded  Fuel system shall be adequately protected against damage  No component of the fuel system shall obstruct the field of vision from the helm position in accordance with the requirements of EN ISO 11591  Specific marking, permanently visible, shall be fixed close to the engine and to the containers, to clearly indicate ‘LPG’ in English and in the local language 5.2 Installer
The installer of the LPG-system shall:  possess the competence and expertise necessary for the proper installation of the LPG-system;  have a quality control system that ensures that the installation of the system meets the requirements of this standard;  maintain records of the leak test (see X7.1X) and start up operations that are carried out after the installation The manufacturer of the system shall supply installation instructions to the installer of the system. NOTE An example of an installation certificate is given in XAnnex F. 5.3 1Other connections to the fuel system Other LPG systems (e.g. for cooking and heating appliances) which are connected to the LPG propulsion system, shall be adequately protected against unintended gas escape and the operation of the LPG propulsion system shall not be affected. Cooking appliances shall be connected to the vapour phase of the fixed container or cylinder and shall be adequately protected against unintended gas escape and the operation of the LPG propulsion system shall not be affected. SIST EN 15609:2009



EN 15609:2008 (E) 12 The vapour takeoff system shall be protected by a manual or remotely controlled shut-off valve incorporating an excess flow, fitted to the container. The LPG heating and/or cooking systems and appliances shall comply with EN ISO 10239. 5.4 Modifications to the structure of the craft Any alteration or modification to any craft resulting from the installation of LPG equipment shall be carried out in accordance with sound engineering practices and in compliance with the relevant marine standards. The installation of LPG containers shall not adversely affect the stability and buoyancy of the craft when evaluated in accordance with EN ISO 12217. If any substantial modification is made to the craft structure to facilitate the installation of the fuel system, a written agreement, accompanied by a detailed drawing, shall be obtained from the builder of the craft or a notified body. 5.5 Container installation 5.5.1 General The container shall:  be stowed either in the open air or in a container locker;  not be stowed in the engine compartment, unless in a container locker (see X5.5.4);  not be stowed in accommodation spaces;  be securely fastened to the craft;  be installed in the correct orientation according to the container manufacturer instructions;  be installed in such a manner that it does not form an obstruction;  be installed in such a way that provisions for escape in the event of fire and/or inversion are not negatively affected When in open air, LPG containers, pressure regulators and safety devices shall be installed in housings protecting them from direct solar radiation. Containers, pressure regulators and saf
...

SLOVENSKI STANDARD
kSIST prEN 15609:2008
2SUHPDLQSULERU]DXWHNRþLQMHQLQDIWQLSOLQ 813 3RJRQVNLVLVWHPLQD813]D
þROQHMDKWHLQGUXJDSORYLOD=DKWHYH]DYJUDGQMR
LPG equipment and accessories - LPG propulsion systems for boats, yachts and other
craft - Installation requirements
Flüssiggas-(LPG-)Geräte und Ausrüstungsteile - Flüssiggas-(LPG-)Antriebssysteme für
Boote, Yachten und andere Wasserfahrzeuge - Anforderungen an die Installation
Equipements pour gaz de pétrole liquéfié et leurs accessoires - Systemes de propulsion
GPL des bateaux, yachts et autres navires - Exigences d'installation
Ta slovenski standard je istoveten z: prEN 15609
ICS:
23.020.20 Posode in vsebniki, montirani Vessels and containers
na vozila mounted on vehicles
47.020.01 Splošni standardi v zvezi z General standards related to
ladjedelništvom in shipbuilding and marine
konstrukcijami na morju structures
kSIST prEN 15609:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

kSIST prEN 15609:2008

---------------------- Page: 2 ----------------------

kSIST prEN 15609:2008
EUROPEAN STANDARD
FINAL DRAFT
prEN 15609
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2008
ICS 47.020.20; 47.080

English Version
LPG equipment and accessories - LPG propulsion systems for
boats, yachts and other craft - Installation requirements
Equipements pour gaz de pétrole liquéfié et leurs Flüssiggas-(LPG-)Geräte und Ausrüstungsteile -
accessoires - Systèmes de propulsion GPL des bateaux, Flüssiggas-(LPG-)Antriebssysteme für Boote, Yachten und
yachts et autres navires - Exigences d'installation andere Wasserfahrzeuge - Anforderungen an die
Installation
This draft European Standard is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee CEN/TC
286.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15609:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

kSIST prEN 15609:2008
prEN 15609:2008 (E)
Contents Page
Foreword.4
Introduction .5
1 Scope .6
2 Normative references .6
3 Terms and definitions .7
4 Components.8
4.1 General provisions .8
4.2 LPG container(s).8
4.2.1 General provisions .8
4.2.2 Cylinders.8
4.2.3 Fixed container .9
4.3 Fuel system components.9
5 Installation requirements .11
5.1 General requirements.11
5.2 Installer .11
5.3 Other connections to the fuel system .11
5.4 Modifications to the structure of the craft .12
5.5 Container installation .12
5.5.1 General.12
5.5.2 Fixed containers .13
5.5.3 Cylinders.13
5.5.4 Container lockers.14
5.5.5 Installation of more than one container .14
5.6 Components on or in the fixed container .14
5.6.1 General requirements.14
5.6.2 Remote-controlled service valve with excess flow valve on the container.15
5.6.3 Pressure relief valve.15
5.6.4 Filler valve .15
5.6.5 80 % stop valve .15
5.6.6 Level indicator.15
5.6.7 Gas-tight housing .15
5.6.8 Pressure relief device.15
5.7 Other components.16
5.7.1 Gas pipes tubes and hoses .16
5.7.2 Gas connections between components of the LPG-system.17
5.7.3 Remote-controlled shut-off valve.18
5.7.4 Filling unit.18
5.8 Electrical installation.19
5.8.1 General.19
5.8.2 Battery position.19
5.9 Fuel selection system .20
5.10 Gas detection .20
5.10.1 General.20
5.10.2 Alarm position.20
5.10.3 Sensors position.20
5.11 Forced ventilation.21
5.11.1 General.21
5.11.2 Purging of machinery space.21
5.11.3 Position of venting.21
2

---------------------- Page: 4 ----------------------

kSIST prEN 15609:2008
prEN 15609:2008 (E)
5.11.4 Fan sizing .21
6 Owner's manual.21
7 Commissioning.21
7.1 Tightness test .21
7.2 LPG filling of the container and the system .22
7.3 Fuel system test .22
7.4 Water trial .22
Annex A (normative) Fixing requirements for containers with a capacity up to and including 150
litres .23
A.1 General requirements .23
A.2 Container frame .24
Annex B (normative) Fixing requirements for containers with a capacity over 150 litres.25
B.1 General requirements .25
B.2 Container frame .25
Annex C (normative) Cylinder fixing requirements.26
C.1 General requirements .26
C.2 Cylinder frame .26
Annex D (normative) Instructions to be included in the owner's manual.29
D.1 General requirements .29
D.2 Availability of LPG supply .29
D.3 Position and operation of emergency shut-off valve .29
D.4 Safety instructions to be included in the manual .29
D.5 Instruction for the normal use of the LPG system.30
D.5.1 Filling of the LPG system .30
D.5.2 Switching procedure (for bi-fuelled craft).30
D.5.3 Opening and closing of manual valves (in case of several containers).30
D.5.4 Level indicator (in case of fixed container) .30
D.5.5 Maintenance and inspection .30
D.5.6 Defects and repairs .31
D.5.7 Storage, repair and maintenance.31
D.5.8 Disposal.31
D.5.9 Hot work .31
Annex E (informative) Installation of more than one container .32
Annex F (informative) Example of installation certificate.33
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 94/25/EC amended by EU Directive 2003/44/EC .34
Bibliography.35

3

---------------------- Page: 5 ----------------------

kSIST prEN 15609:2008
prEN 15609:2008 (E)
Foreword
This document (prEN 15609:2008) has been prepared by Technical Committee CEN/TC 286 “Liquefied
petroleum gas equipment and accessories”, the secretariat of which is held by NSAI.
This document is currently submitted to the Formal Vote.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 94/25/EC.
For relationship with the EU Directive, see informative Annex ZA, which is an integral part of this document.
4

---------------------- Page: 6 ----------------------

kSIST prEN 15609:2008
prEN 15609:2008 (E)
Introduction
This European Standard calls for the use of substances and procedures that can be injurious to health if
adequate precautions are not taken. It refers only to technical suitability and does not absolve the user from
legal obligations relating to health and safety at any stage.
It has been assumed in the drafting of this European Standard that the execution of its provisions is entrusted
to appropriately qualified and experienced people.
This standard is based on EN 12979 [2].
5

---------------------- Page: 7 ----------------------

kSIST prEN 15609:2008
prEN 15609:2008 (E)

1 0BScope
This European Standard specifies the requirements for the LPG propulsion systems on craft with hull lengths
less than or equal to 24 meters, see Directive 94/25.
2 1BNormative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 630:1995, Structural steels –Plates, wide flats, bars, sections and profiles
EN ISO 898-1:1999, Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts,
screws and studs (ISO 898-1:1999)
EN 1442, LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design
and construction
EN ISO 10133, Small craft – Electrical systems – Extra-low-voltage d.c. installations (ISO 10133:2000)
EN ISO 10239, Small craft – Liquefied petroleum gas (LPG) systems (ISO 10239:2008)
EN ISO 10240, Small craft – Owner’s manual (ISO 10240:2004)
EN ISO 11105, Small craft – Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:1997)
EN ISO 11591, Small craft, engine-driven - Field of vision from helm position (ISO 11591:2000)
EN ISO 12217 (all parts), Small craft – Stability and buoyancy assessment and categorization
EN 12805, Automotive LPG components – Containers
EN 12806:2003, Automotive liquefied petroleum gas components – Other than containers
EN 12816, Transportable refillable steel and aluminium LPG cylinders – Disposal
EN 12864, Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal
to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane,
propane or their mixtures
EN 13109, LPG tanks – Disposal
EN 13110, Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and
construction
EN ISO 13297, Small craft – Electrical systems – Alternating current installations (ISO 13297:2000)
EN 14140, Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative
design and construction
EN 14427, Transportable refillable fully wrapped composite cylinders for Liquefied Petroleum Gases - Design
and construction
6

---------------------- Page: 8 ----------------------

kSIST prEN 15609:2008
prEN 15609:2008 (E)
ISO 20826, Automotive LPG components – Containers
EN 28846, Small craft - Electrical devices - Protection against ignition of surrounding flammable gases
(ISO 8846:1990)
EN 60529, Degrees of protection provided by enclosures (IP-code) (IEC 60529:1989)
3 2BTerms and definitions
For the purposes of this document, the terms and definitions given in EN 12806:2003 and the following apply.
3.1
accessible
capable of being reached for inspection, removal or maintenance without removal of permanent craft
structures
NOTE Hatches are not regarded as permanent craft structures in this sense, even if tools such as wrenches or
screwdrivers are needed to open them.
3.2
container housing
ventilated enclosure intended solely for storage of one or more LPG containers, pressure regulators and
safety devices and located on the exterior of the boat where any leakage would flow overboard
3.3
container locker
gas-tight (to the craft) enclosure with an overboard drain, where any leakage would flow overboard, intended
solely for storage of one or more LPG containers in a cockpit or recessed into the craft
3.4
cylinder
transportable, refillable container with a water capacity from 0,5 l up to and including 150 l
3.8
filler valve
valve system for liquid fill service
3.9
fixed container
LPG tank permanently fixed to the structure of the craft
3.11
gas detection
detection of the presence of LPG outside its containment system
3.13
installer
person or organisation, who by qualification, training, experience and resources can assume technical
responsibility for the installation of the LPG propulsion system
3.15
Liquefied Petroleum Gas (LPG)
mixture of predominantly butane or propane with traces of other hydrocarbon gases classified in accordance
with UN number 1965, hydrocarbon gases mixture, liquefied, NOS or UN number 1075, petroleum gases,
liquefied
NOTE 1 In some countries, UN numbers 1011 and 1978 may also be designated LPG.
7

---------------------- Page: 9 ----------------------

kSIST prEN 15609:2008
prEN 15609:2008 (E)
NOTE 2 For automotive LPG specification, see EN 589 [1].
3.17
permanently installed
securely fastened so that tools have to be used for removal
3.21
readily accessible
capable of being reached for operation, inspection or maintenance without the removal of any craft structure
or the use of any tools or the removal of any item of portable equipment stowed in places intended for storage
of portable equipment such as lockers, drawers or shelves
3.24
ventilation system
assembly of ducts and an electrical ventilator that is capable of extracting hydrocarbons from the inside of the
craft and allowing the entrance of fresh air
3.25
venting tube
duct that connects the gas-tight housing to the atmosphere outside of the craft
4 3BComponents
4.1 7BGeneral provisions
Individual components of the system, and the system as a whole, shall be designed to withstand the
combined conditions of pressure, vibration, shocks, corrosion and movement encountered under normal
operation.
All materials used in LPG systems shall be compatible with LPG and with other liquids or compounds with
which it may come into contact under normal operating conditions, e.g. grease, lubricating oil, bilge solvents,
fresh and sea water.
4.2 8BLPG container(s)
4.2.1 25BGeneral provisions
The LPG container(s) shall be protected from corrosion in the marine environment by an adequate surface
treatment system, or be constructed from materials suitable for the marine environment.
For the purpose of this standard, two types of LPG containers are identified:
 cylinders; and
 fixed containers.
4.2.2 26BCylinders
LPG cylinders may be used in the liquid or gas/vapour phase to fuel the engine of a craft depending on the
choice of technology and the required power.
The cylinders used on craft shall comply with one of the following:
 EN 13110,
 EN 1442,
8

---------------------- Page: 10 ----------------------

kSIST prEN 15609:2008
prEN 15609:2008 (E)
 EN 14140,
 EN 14427, or
 an equivalent standard.
4.2.3 27BFixed container
4.2.3.1 54BGeneral
A fixed container shall comply with EN 12805, ISO 20826 or an equivalent standard.
4.2.3.2 55BComponents fitted to the fixed container
The container shall be equipped with the following components, which may be either separate or combined
(e.g. multivalve):
a) 80 % stop valve,
b) filler valve,
c) level indicator,
d) pressure relief valve or pressure relief device,
e) remotely controlled service valve with excess flow valve.
The container may be equipped with a:
1) gas-tight housing,
2) power supply bushing for actuators/LPG fuel pump,
3) LPG fuel pump inside the container,
4) non-return valve.
All components fitted to the container shall comply with EN 12806.
The filler valve shall incorporate a double non-return valve.
The non-return valve in the filler valve shall comply with Annex G of EN 12806:2003.
4.3 9BFuel system components
The following components of the fuel system, where used, shall comply with EN 12806 and shall be suitable
for use in the marine environment:
a) pressure regulator/vaporizer,
b) shut-off valve,
c) gas injection device or injector,
d) gas mixing unit,
e) gas dosage unit,
9

---------------------- Page: 11 ----------------------

kSIST prEN 15609:2008
prEN 15609:2008 (E)
f) flexible fuel hoses and gas pipes,
g) hydrostatic relief valve,
h) LPG filter unit,
i) pressure and/or temperature sensor,
j) service coupling,
k) electronic control unit,
l) fuel rail,
m) filler unit,
n) fuel pump.
The materials of the vaporizer, which are in contact with the engine coolant, shall be compatible with this
coolant. The vaporiser shall be designed to contain a coolant pressure of at least 200 kPa.
Additional equipment required for the effective operation of the engine, not covered by EN 12806, shall only
be installed in parts of the LPG system where the pressure is less than 20 kPa.
10

---------------------- Page: 12 ----------------------

kSIST prEN 15609:2008
prEN 15609:2008 (E)
5 4BInstallation requirements
5.1 10BGeneral requirements
 The fuel supply system, with the exception of a cylinder(s), shall be permanently installed.
 All parts of the system shall be securely fastened.
 All valves and other components intended to be operated or observed during normal operation of the
craft, or for emergency purposes, shall be readily accessible.
 All other components of the system shall be accessible.
 No component of the fuel system shall be located within 100 mm of the exhaust or similar heat source,
unless adequate shielding against heat is provided.
 The clearance between dry exhaust components and an LPG container shall not be less than 250 mm,
unless an equivalent thermal barrier is provided.
 Fuel containers and components of fuel systems shall not be installed directly above batteries, unless the
batteries are protected against the effects of fuel leakage.
 The fuel system shall function in such a manner that the pressure for which it has been designed and
approved cannot be exceeded.
 The fuel system shall be adequately protected against damage.
 No component of the fuel system shall obstruct the field of vision from the helm position in accordance
with the requirements of EN ISO 11591.
 A specific marking, permanently visible, shall be fixed close to the engine and to the containers, to clearly
indicate ‘LPG’ in English and in the local language.
5.2 11BInstaller
The installer of the LPG-system shall:
 possess the competence and expertise necessary for the proper installation of the LPG-system;
 have a quality control system that ensures that the installation of the system meets the requirements of
this standard;
 maintain records of the leak test (see X7.1X) and start up operations that are carried out after the installation.
The manufacturer of the system shall supply installation instructions to the installer of the system.
NOTE An example of an installation certificate is given in XAnnex FX.
5.3 12BOther connections to the fuel system
Other LPG systems (e.g. for cooking and heating appliances) which are connected to the LPG propulsion
system, shall be adequately protected against unintended gas escape and the operation of the LPG
propulsion system shall not be affected.
Cooking appliances shall be connected to the vapour phase of the fixed container or cylinder and shall be
adequately protected against unintended gas escape and the operation of the LPG propulsion system shall
not be affected.
11

---------------------- Page: 13 ----------------------

kSIST prEN 15609:2008
prEN 15609:2008 (E)
The vapour takeoff system shall be protected by a manual or remotely controlled shut-off valve incorporating
an excess flow, fitted to the container.
The LPG heating and/or cooking systems and appliances shall comply with EN ISO 10239.
5.4 13BModifications to the structure of the craft
Any alteration or modification to any craft resulting from the installation of LPG equipment shall be carried out
in accordance with sound engineering practices and in compliance with the relevant marine standards.
The installation of LPG containers shall not adversely affect the stability and buoyancy of the craft when
evaluated in accordance with EN ISO 12217.
If any substantial modification is made to the craft structure to facilitate the installation of the fuel system, a
written agreement, accompanied by a detailed drawing, shall be obtained from the builder of the craft or a
notified body.
5.5 14BContainer installation
5.5.1 28BGeneral
The container shall:
 be stowed either in the open air or in a container locker;
 not be stowed in the engine compartment, unless in a container locker (see X5.5.4);
 no
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.