Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test (ISO 276:2019)

This document specifies the requirements and the corresponding test methods for five types of linseed
stand oil suitable for paints and varnishes.

Bindemittel für Beschichtungsstoffe - Leinöl-Standöl - Anforderungen und Prüfverfahren (ISO 276:2019)

Dieses Dokument legt die Anforderungen und die entsprechenden Prüfverfahren für fünf Typen von Leinöl-Standöl fest, die für Beschichtungsstoffe geeignet sind.

Liants pour peintures et vernis - Standolies d'huile de lin - Exigences et méthodes d'essai (ISO 276:2019)

Le présent document spécifie les exigences et les méthodes d'essai correspondantes de cinq types de standolie d'huile de lin pour peintures et vernis.

Veziva za barve in lake - Polimerizirano laneno olje - Zahteve in preskusne metode (ISO 276:2019)

General Information

Status
Published
Public Enquiry End Date
03-Apr-2019
Publication Date
14-Jun-2021
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
27-May-2021
Due Date
01-Aug-2021
Completion Date
15-Jun-2021

Relations

Buy Standard

Standard
EN ISO 276:2021
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 276:2019
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 276:2021
01-julij-2021
Nadomešča:
SIST EN ISO 276:2012
Veziva za barve in lake - Polimerizirano laneno olje - Zahteve in preskusne metode
(ISO 276:2019)
Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test
(ISO 276:2019)
Bindemittel für Beschichtungsstoffe - Leinöl-Standöl - Anforderungen und Prüfverfahren
(ISO 276:2019)
Liants pour peintures et vernis - Standolies d'huile de lin - Exigences et méthodes
d'essai (ISO 276:2019)
Ta slovenski standard je istoveten z: EN ISO 276:2021
ICS:
87.060.20 Veziva Binders
SIST EN ISO 276:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 276:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 276:2021


EN ISO 276
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2021
EUROPÄISCHE NORM
ICS 87.060.20 Supersedes EN ISO 276:2010
English Version

Binders for paints and varnishes - Linseed stand oil -
Requirements and methods of test (ISO 276:2019)
Liants pour peintures et vernis - Standolies d'huile de Bindemittel für Beschichtungsstoffe - Leinöl-Standöl -
lin - Exigences et méthodes d'essai (ISO 276:2019) Anforderungen und Prüfverfahren (ISO 276:2019)
This European Standard was approved by CEN on 9 November 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 276:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 276:2021
EN ISO 276:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 276:2021
EN ISO 276:2021 (E)
European foreword
This document (EN ISO 276:2021) has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2021, and conflicting national standards
shall be withdrawn at the latest by November 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 276:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 276:2019 has been approved by CEN as EN ISO 276:2021 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 276:2021

---------------------- Page: 6 ----------------------
SIST EN ISO 276:2021
INTERNATIONAL ISO
STANDARD 276
Third edition
2019-09
Binders for paints and varnishes —
Linseed stand oil — Requirements and
methods of test
Liants pour peintures et vernis — Standolies d'huile de lin —
Exigences et méthodes d'essai
Reference number
ISO 276:2019(E)
©
ISO 2019

---------------------- Page: 7 ----------------------
SIST EN ISO 276:2021
ISO 276:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 276:2021
ISO 276:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements and test methods .
...

SLOVENSKI STANDARD
oSIST prEN ISO 276:2019
01-marec-2019
Veziva za barve in lake - Polimerizirano laneno olje - Zahteve in preskusne metode
(ISO/DIS 276:2019)
Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test
(ISO/DIS 276:2019)
Bindemittel für Beschichtungsstoffe - Leinöl-Standöl - Anforderungen und Prüfverfahren
(ISO/DIS 276:2019)
Liants pour peintures et vernis - Standolies d'huile de lin - Exigences et méthodes d'essai
(ISO/DIS 276:2019)
Ta slovenski standard je istoveten z: prEN ISO 276
ICS:
87.060.20 Veziva Binders
oSIST prEN ISO 276:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 276:2019

---------------------- Page: 2 ----------------------
oSIST prEN ISO 276:2019
DRAFT INTERNATIONAL STANDARD
ISO/DIS 276
ISO/TC 35 Secretariat: NEN
Voting begins on: Voting terminates on:
2019-02-08 2019-05-03
Binders for paints and varnishes — Linseed stand oil —
Requirements and methods of test
Liants pour peintures et vernis — Standolies d'huile de lin — Exigences et méthodes d'essai
ICS: 87.060.20
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 276:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019

---------------------- Page: 3 ----------------------
oSIST prEN ISO 276:2019
ISO/DIS 276:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 276:2019
ISO/DIS 276:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements and test methods . 1
5 Test report . 2
© ISO 2019 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 276:2019
ISO/DIS 276:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.