SIST ISO 6336-2:2008

Oznaka standarda: SIST ISO 6336-2:2008
Koda projekta: 036328
Organizacija: SIST
Naslov (angleški): Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting)
Naslov (slovenski): Izračun nosilnosti ravnozobih in poševnozobih zobnikov - 2. del: Izračun obratovalne vzdržljivosti zobnih bokov (jamičenje)
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 20% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST ISO 6336-2:2008 angleški jezik Active SIST-H: 71.50 EUR
PDF
Papir
Tehnični odbor: ISEL - Strojni elementi
ICS: 21.200
Status: Objavljen
Objavljen: 01-jul-2008
Refer. št. objave: Sporočila 2008-07
Področje projekta (angleško): This part of ISO 6336 specifies the fundamental formulæ for use in the determination of the surface load capacity of cylindrical gears with involute external or internal teeth. It includes formulæ for all influences on surface durability for which quantitative assessments can be made. It applies primarily to oil-lubricated transmissions, but can also be used to obtain approximate values for (slow-running) grease-lubricated transmissions, as long as sufficient lubricant is present in the mesh at all times. The given formulæ are valid for cylindrical gears with tooth profiles in accordance with the basic rack standardized in ISO 53. They may also be used for teeth conjugate to other basic racks where the actual transverse contact ratio is less than <(inf)n> 2,5. The results are in good agreement with other methods for the range, as indicated in the scope of ISO 6336-1. These formulæ cannot be directly applied for the assessment of types of gear tooth surface damage such as plastic yielding, scratching, scuffing or any other than that described in Clause 4. The load capacity determined by way of the permissible contact stress is called the "surface load capacity" or "surface durability".
Povezava na standarde
Povezava Ime Datum
Nadomešča SIST ISO 6336-2:2002 - Izračun nosilnosti ravnozobih in poševnozobih zobnikov - 2. del: Izračun obratovalne vzdržljivosti zobnih bokov (jamičenje) 01-jul-2008
Nadomešča SIST ISO 6336-2:2002/TC 2:2002 - Izračun nosilnosti ravnozobih in poševnozobih zobnikov - 2. del: Izračun obratovalne vzdržljivosti zobnih bokov (jamičenje) - Tehnični popravek 2 01-mar-2015
Nadomešča SIST ISO 6336-2:2002/TC 1:2002 - Izračun nosilnosti ravnozobih in poševnozobih zobnikov - 2. del: Izračun obratovalne vzdržljivosti zobnih bokov (jamičenje) - Tehnični popravek 1 01-jul-2008


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi