Electrical installations of buildings - Part 7: Requirements for special installations or locations - Section 714: External lighting installations

Deals with fixed external lighting installations. The requirements  apply particularly to lighting installations e.g. for roads, parks, gardens, public places, sporting areas, illumination of monuments   and flood lighting, and other equipment incorporating lighting such as telephone kiosks, bus shelters, advertising panels, town maps,   road signs.                                                                                                                       Note:  External lighting comprises luminaires, wiring system and accessories located outside buildings.                          [
]This English-language version is derived from the original bilingual publication by leaving out all French-language pages. Missing page   numbers correspond to the French-language pages.

Electrical installations of buildings - Part 7: Requirements for special installations and locations - Section 714: External lighting installations

General Information

Status
Withdrawn
Publication Date
31-Jan-2000
Withdrawal Date
30-Jun-2002
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jul-2002
Due Date
01-Jul-2002
Completion Date
01-Jul-2002

Buy Standard

Standard
IEC 60364-7-714:2000
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST IEC 60364-7-714:2000
01-februar-2000
Electrical installations of buildings - Part 7: Requirements for special installations
and locations - Section 714: External lighting installations
Electrical installations of buildings - Part 7: Requirements for  special installations or
locations - Section 714: External lighting installations
Ta slovenski standard je istoveten z: IEC 60364-7-714
ICS:
91.140.50 Sistemi za oskrbo z elektriko Electricity supply systems
91.160.20 Zunanja razsvetljava stavb Exterior building lighting
SIST IEC 60364-7-714:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST IEC 60364-7-714:2000

---------------------- Page: 2 ----------------------

SIST IEC 60364-7-714:2000


INTERNATIONAL IEC


STANDARD 60364-7-714





First edition
1996-04


Electrical installations of buildings –
Part 7-714:
Requirements for special installations or
locations –
External lighting installations



 IEC 1996 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical,
including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
H
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

---------------------- Page: 3 ----------------------

SIST IEC 60364-7-714:2000
364-7-714 © IEC: 1996 – 3 –
CONTENTS
Page
FOREWORD 5
7
INTRODUCTION
Clause
External lighting installations 9
714
9
714.1 Scope, object and fundamental principles
714.11 Scope 9
714.12 Normative references 9
11
714.13 Definitions
11 714.3 Assessment of general characteristics
Classification of external influences 11
714.31
714.4 Protection for safety 11
11
714.41 Protection against electric shock
13
Selection and erection of electrical equipment 714.5
13
714.51 Common rules

---------------------- Page: 4 ----------------------

SIST IEC 60364-7-714:2000
364-7-714 © IEC: 1996 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
ELECTRICAL INSTALLATIONS OF BUILDINGS —
Partie 7: Requirements for special installations or locations —
Section 714: External lighting installations
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national
electrotechnical committees (IEC National Committees). The object of the IEC is to promote intemational co-operation on
all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities,
the IEC publishes International Standards. Their preparation is entrusted to technical committees; any IEC National
Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and
non-govemmental organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with
ons determined by agreement between
the International Organization for Standardization (ISO) in accordance with condi ti
the two organizations.
The formal decisions or agreements of the IEC on technical matters, express as nearly as possible, an inte rnational
2)
consensus of opinion on the relevant subjects since each technical committee has representation from all interested
National Committees.
rna onal use and are published in the form of
3) The documents produced have the form of recommendations for inte ti
standards, technical reports or guides and they are accepted by the Na tional Committees in that sense.
In order to promote inte rnational unification, IEC National Committees undertake to apply IEC International Standards
4)
transparently to the maximum extent possible in their national and regional standards. Any divergence between the IEC
corresponding national or regional standard shall be clearly indicated in the latter.
Standard and the
The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
5)
equipment declared to be in conformity with one of its standards.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
6)
of patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 364-7-714 has been prepared by IEC technical committee 64: Electrical
installations of buildings.
The text of this standard is based on the following documents:
on voting
FDIS Report
64/839/RVD
64/794/FDIS
Full information on the voting for the approval of this standard can be found in the report on voting
indicated in the above table.

---------------------- Page: 5 ----------------------

SIST IEC 60364-7-714:2000
364-7-714 © IEC: 1996 – 7 –
INTRODUCTION
The requirements of pa rt 7 supplement, modify or replace certain of the general requirements of the
IEC 364. The numbers following the particular number of section 714 are those of the corresponding
parts, chapters, sections or clauses of IEC Publication 364. The absence of reference to a chapter, a
section or a clause means that the general requirements of IEC 364 are applicable.

---------------------- Page: 6 ----------------------

SIST IEC 60364-7-714:2000
364-7-714 © I EC: 1996 – 9 –
ELECTRICAL INSTALLATIONS OF BUILDINGS —
Requirements for special installations or locations —
Partie 7:
Section 714: External lighting installations
714 External lighting installations
714.1 Scope, object and fundamental principles
714.11 Scope
This section of IEC 364-7 deals with fixed external lighting installations.
ses luminaires, wiring system and accessories located outside buildings.
NOTE - External lighting comp ri
The requirements apply particularly to:
lighting installations e.g. for roads, parks, gardens, public places, sporting areas, illumination of

monuments and floodlighting;
– other equipment incorporating lighting such as telephone kiosks, bus shelters, advertising
panels, town plans, roads signs.
These rules do not apply to:
rt of public power grid and operated by a public supply
– public lighting installations which are pa
authority who is responsible for and has taken all necessary measures regarding saf
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.