Gullies for buildings - Part 3: Evaluation of conformity

This draft European Standard specifies the requirements for evaluation of conformity for floor gullies, roof drains and access covers for buildings to ensure conformity of these products with EN 1253-1, EN 1253-2 and FprEN 1253-4.

Abläufe für Gebäude - Teil 3: Bewertung der Konformität

Diese Europäische Norm legt die Anforderungen an die Bewertung der Konformität für Bodenabläufe, Dach-abläufe und Abdeckungen für Gebäuden fest, um die Konformität dieser Produkte mit EN 1253-1, EN 1253-2 und EN 1253-4 sicherzustellen.

Avaloirs et siphons pour bâtiments - Partie 3 : Évaluation de la conformité

Le présent projet de Norme européenne spécifie les exigences pour l'évaluation de la conformité des avaloirs/siphons de sol, des avaloirs de toiture et des tampons/couvercles d'accès utilisés dans des bâtiments, afin de garantir la conformité de ces produits avec les normes EN 1253-1, EN 1253-2 et FprEN 1253-4.

Odtoki v stavbah - 3. del: Vrednotenje skladnosti

Ta osnutek evropskega standarda določa zahteve za vrednotenje skladnosti za talne odtoke, žlebove in pokrove za stavbe, da se zagotovi skladnost teh izdelkov s standardi EN 1253-1, EN 1253-2 in FprEN 1253-4.

General Information

Status
Published
Public Enquiry End Date
29-Oct-2015
Publication Date
16-Jun-2016
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
30-May-2016
Due Date
04-Aug-2016
Completion Date
17-Jun-2016

Relations

Buy Standard

Standard
EN 1253-3:2016
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN 1253-3:2015
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Odtoki v stavbah - 3. del: Vrednotenje skladnostiAbläufe für Gebäude - Teil 3: Bewertung der KonformitätAvaloirs et siphons pour bâtiments - Partie 3 : Évaluation de la conformitéGullies for buildings - Part 3: Evaluation of conformity91.140.80Drenažni sistemiDrainage systemsICS:Ta slovenski standard je istoveten z:EN 1253-3:2016SIST EN 1253-3:2016en,fr,de01-julij-2016SIST EN 1253-3:2016SLOVENSKI
STANDARDSIST EN 1253-3:20001DGRPHãþD



SIST EN 1253-3:2016



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1253-3
May
t r s x ICS
{ sä s v rä z r Supersedes EN
s t w uæ uã s { { {English Version
Gullies for buildings æ Part
uã Evaluation of conformity Avaloirs et siphons pour bâtiments æ Partie
uã Évaluation de la conformité
Abläufe für Gebäude æ Teil
uã Bewertung der Konformität This European Standard was approved by CEN on
s v February
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s t w uæ uã t r s x ESIST EN 1253-3:2016



EN 1253-3:2016 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Evaluation of conformity . 4 4.1 General . 4 4.2 Type testing . 4 4.3 Factory production control . 4 Annex A (informative)
Control by third party (third party control) . 8 A.1 General . 8 A.2 Procedure of the third party control . 8 A.3 Report by the third party . 9 A.4 Retesting . 10 A.5 Non-conforming products . 10 Bibliography . 11
SIST EN 1253-3:2016



EN 1253-3:2016 (E) 3 European foreword This document (EN 1253-3:2016) has been prepared by Technical Committee CEN/TC 165 “Waste water engineering”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2016, and conflicting national standards shall be withdrawn at the latest by November 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1253-3:1999. This is the third part in EN 1253, a series of standards relating to different types of floor gullies, roof drains and access covers for drainage systems inside buildings. The EN 1253 series under the main title Gullies for buildings actually consists of the following parts: — Part 1: Trapped floor gullies with a depth water seal of at least 50 mm; — Part 2: Roof drains and floor gullies without trap; — Part 3: Evaluation of conformity; — Part 4: Access covers; — Part 5: Gullies with light liquids closure. Since the latest edition of EN 1253-3 the most significant technical changes are the following: a) introduction of the new standards on trapped floor gullies with a depth of water seal of at least 50 mm (EN 1253-1) and roof drains and floor gullies without trap (EN 1253-2); b) amendment of items to be inspected as well as modification of frequency of control for specific requirements. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 1253-3:2016



EN 1253-3:2016 (E) 4 1 Scope This European Standard specifies the requirements for evaluation of conformity for floor gullies, roof drains and access covers for buildings to ensure conformity of these products with EN 1253–1, EN 1253-2 and EN 1253–4. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1253–1:2015, Gullies for buildings — Part 1: Trapped floor gullies with a depth water seal of at least 50 mm EN 1253-2:2015, Gullies for buildings — Part 2: Roof drains and floor gullies without trap EN 1253–4:2016, Gullies for buildings — Part 4: Access covers 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1253-1, EN 1253-2 and EN 1253–4 apply. 4 Evaluation of conformity 4.1 General Products manufactured in accordance with EN 1253–1, EN 1253–2 and EN 1253–4 will be subjected to the evaluation of conformity procedure as follows: a) type testing; b) factory production control. The control by a third party is recommended. If third party control is carried out, this should be done in accordance with Annex A. The actual practice of third party control in the different countries may be maintained as long as the third party control in this standard retains its recommended character. 4.2 Type testing Complete drawings of the products shall be available. Three production specimens shall be tested in accordance with EN 1253-1, EN 1253–2 and EN 1253–4 and shall comply with all the relevant requirements of EN 1253–1, EN 1253-2 and EN 1253–4. This procedure also applies if the design is subsequently amended structurally or if the material is changed. All subsequent amendments, whether structural or not, shall have the approval of the certification body, if required. 4.3 Factory production control The purpose of the factory production control is to constantly ensure that current production of floor gullies, roof drains and access covers is in conformity with the technical requirements of EN 1253–1, EN 1253-2, and EN 1253–4. SIST EN 1253-3:2016



EN 1253-3:2016 (E) 5 Suitable staff and independence of quality control of production are indispensable prerequisites. The facilities necessary for factory production control include the measuring and test equipment for the tests in accordance with EN 1253-1, EN 1253–2 and EN 1253–4. The factory production control shall at least cover the specific items listed in Tables 1, 2 and 3. The documentation shall include all steps of production from the incoming raw materials to the final product leaving the factory. The factory production control
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Odtoki v stavbah - 3. del: Vrednotenje skladnostiAbläufe für Gebäude - Teil 3: Bewertung der KonformitätAvaloirs et siphons pour bâtiments - Partie 3 : Évaluation de la conformitéGullies for buildings - Part 3: Evaluation of conformity91.140.80Drenažni sistemiDrainage systemsICS:Ta slovenski standard je istoveten z:FprEN 1253-3kSIST FprEN 1253-3:2015en,fr,de01-oktober-2015kSIST FprEN 1253-3:2015SLOVENSKI
STANDARD



kSIST FprEN 1253-3:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 1253-3
August 2015 ICS 91.140.80 Will supersede EN 1253-3:1999English Version
Gullies for buildings - Part 3: Evaluation of conformity
Avaloirs et siphons pour bâtiments - Partie 3 : Évaluation de la conformité
Abläufe für Gebäude - Teil 3: Bewertung der Konformität This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 165.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 1253-3:2015 EkSIST FprEN 1253-3:2015



FprEN 1253-3:2015 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Evaluation of conformity .4 4.1 General .4 4.2 Type testing .4 4.3 Factory production control .4 Annex A (informative)
Control by third party (third party control) .8 A.1 General .8 A.2 Procedure of the third party control .8 A.3 Report by the third party .9 A.4 Retesting . 10 A.5 Non-conforming products . 10
kSIST FprEN 1253-3:2015



FprEN 1253-3:2015 (E) 3 Foreword This document (FprEN 1253-3:2015) has been prepared by Technical Committee CEN/TC 165 “Waste water engineering”, the secretariat of which is held by DIN. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 1253-3:1999. This is the third part in EN 1253, a series of standards relating to different types of floor gullies, roof drains and access covers for drainage systems inside buildings. The EN 1253 series under the main title Gullies for buildings actually consists of the following parts: — Part 1: Trapped floor gullies with a depth water seal of at least 50 mm; — Part 2: Roof drains and floor gullies without trap; — Part 3: Evaluation of conformity; — Part 4: Access covers; — Part 5: Gullies with light liquids closure. Since the latest edition of EN 1253-3 the most significant technical changes are the following: a) introduction of the new standards on trapped floor gullies with a depth of water seal of at least 50 mm (EN 1253-1) and roof drains and floor gullies without trap (EN 1253-2); b) amendment of items to be inspected as well as modification of frequency of control for specific requirements. kSIST FprEN 1253-3:2015



FprEN 1253-3:2015 (E) 4 1 Scope This draft European Standard specifies the requirements for evaluation of conformity for floor gullies, roof drains and access covers for buildings to ensure conformity of these products with EN 1253–1, EN 1253-2 and FprEN 1253–4. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1253–1:2015, Gullies for buildings — Part 1: Trapped floor gullies with a depth water seal of at least 50 mm EN 1253-2:2015, Gullies for buildings — Part 2: Roof drains and floor gullies without trap FprEN 1253–4:2015, Gullies for buildings — Part 4: Access covers 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1253-1, EN 1253-2 and FprEN 1253–4 apply. 4 Evaluation of conformity 4.1 General Products manufactured in accordance with EN 1253–1, EN 1253–2 and FprEN 1253–4 will be subjected to the evaluation of conformity procedure as follows: a) type testing; b) factory production control. The control by a third party is recommended. If third party control is carried out, this should be done in accordance with Annex A. The actual practice of third party control in the different countries may be maintained as long as the third party control in this standard retains its recommended character. 4.2 Type testing Complete drawings of the products shall be available. Three production specimens shall be tested in accordance with EN 1253-1, EN 1253–2 and FprEN 1253–4 and shall comply with all the relevant requirements of EN 1253–1, EN 1253-2 and FprEN 1253–4. This procedure also applies if the design is subsequently amended structurally or if the material is changed. All subsequent amendments, whether structural or not, shall have the approval of the certification body, if required. 4.3 Factory production control The purpose of the factory production control is to constantly ensure that current production of floor gullies, roof drains and access covers is in conformity with the technical requirements of EN 1253–1, EN 1253-2, and FprEN 1253–4. kSIST FprEN 1253-3:2015



FprEN 1253-3:2015 (E) 5 Suitable staff and independence of quality control of production are indispensable prerequisites. The facilities necessary for factory production control include the measuring and test equipment for the tests in accordance with EN 1253-1, EN 1253–2 and FprEN 1253–4. The factory production control shall at least cover the specific items listed in Tables 1, 2 and 3. The documentation shall include all steps of production from the incoming raw materials to the final product leaving the factory. The factory production control may be organized in accordance with EN ISO 9001. The manufacturer shall have at his disposal: — an organization scheme with defined responsibilities; — skilled personnel; — all the necessary production facilities; — all the necessary testing facilities. Furthermore, the manufacturer shall establish and maintain a quality plan in which
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.