Routine analytical cigarette-smoking machine - Additional test methods for machine verification

This International Standard specifies additional test methods for routine analytical cigarette-smoking machines intended to check the conformity of these machines with ISO 3308:2012, Clause 4. It only establishes additional test methods for smoking machines and does not deal with actual smoking, which is described in other International Standards. It is composed of three sections relating to: - the determination of pressure drop; - the determination of significant puff profile parameters ; - the verification of restricted smoking.

Machine à fumer analytique de routine pour cigarettes -- Méthodes d'essais complémentaires pour la vérification de la machine

L'ISO 7210:2013 sp�cifie des m�thodes d'essais compl�mentaires relatives aux machines � fumer analytiques de routine pour cigarettes, destin�es � v�rifier la conformit� de ces machines avec l'ISO 3308:2012, Article 4.

Rutinski analizni cigaretni dimni stroj - Dodatne preskusne metode za strojno preverjanje

Ta mednarodni standard določa dodatne preskusne metode za rutinske analizne cigaretne dimne stroje, namenjene preverjanju skladnosti teh naprav s standardom ISO 3308:2012, točka 4. Določa zgolj dodatne preskusne metode za cigaretne dimne stroje in ne obravnava dejanskega kajenja, ki je opisano v drugih mednarodnih standardih. Sestavljen je iz treh delov, ki se nanašajo na: – ugotavljanje padca tlaka; – ugotavljanje pomembnih parametrov profilov puhanja; – preverjanje omejenega kajenja.

General Information

Status
Withdrawn
Publication Date
28-Nov-2013
Withdrawal Date
18-May-2020
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
18-May-2020
Due Date
10-Jun-2020
Completion Date
19-May-2020

Relations

Buy Standard

Standard
ISO 7210:2013 - Routine analytical cigarette-smoking machine -- Additional test methods for machine verification
English language
7 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 7210:2014
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 7210:2013 - Machine a fumer analytique de routine pour cigarettes -- Méthodes d'essais complémentaires pour la vérification de la machine
French language
7 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 7210
Third edition
2013-01-15
Routine analytical cigarette-smoking
machine — Additional test methods
for machine verification
Machine à fumer analytique de routine pour cigarettes — Méthodes
d’essais complémentaires pour la vérification de la machine
Reference number
ISO 7210:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 7210:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 7210:2013(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Determination of pressure drop . 2
4.1 Principle . 2
4.2 Apparatus . 2
4.3 Test atmosphere . 3
4.4 Procedure . 3
4.5 Expression of results . 4
5 Determination of significant puff profile parameters . 4
5.1 Principle . 4
5.2 Apparatus . 4
6 Verification of restricted smoking . 6
6.1 Principle . 6
6.2 Apparatus . 6
6.3 Procedure . 6
6.4 Expression of results . 7
© ISO 2013 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 7210:2013(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 7210 was prepared by Technical Committee ISO/TC 126, Tobacco and tobacco products, Subcommittee
SC 1, Physical and dimensional tests.
This third edition cancels and replaces the second edition (ISO 7210:1997), which has been
technically revised.
iv © ISO 2013 – All rights reserved

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD ISO 7210:2013(E)
Routine analytical cigarette-smoking machine —
Additional test methods for machine verification
1 Scope
This International Standard specifies additional test methods for routine analytical cigarette-smoking
machines intended to check the conformity of these machines with ISO 3308:2012, Clause 4.
It only establishes additional test methods for smoking machines and does not deal with actual smoking,
which is described in other International Standards.
It is composed of three sections relating to:
— the determination of pressure drop (Clause 4);
— the determination of significant puff profile parameters (Clause 5);
— the verification of restricted smoking (Clause 6).
NOTE There are more possibilities to determine the aforementioned parameters. Systems giving the same
results and accuracies can be used. The certificate of compliance with this International Standard may be obtained
from machine manufacturer. The frequency to carry out these additional test methods for smoking machines’
verification is not part of the scope of this International Standard.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 3308:2012, Routine analytical cigarette-smoking machine — Definitions and standard conditions
ISO 3402, Tobacco and tobacco products — Atmosphere for conditioning and testing
3 Terms and definitions
For the purposes of this International Standard, the following terms and definitions apply.
3.1
pressure drop
static pressure difference between the two en
...

SLOVENSKI STANDARD
SIST ISO 7210:2014
01-januar-2014
1DGRPHãþD
SIST ISO 7210:1998
Rutinski analizni cigaretni dimni stroj - Dodatne preskusne metode za strojno
preverjanje
Routine analytical cigarette-smoking machine - Additional test methods for machine
verification
Machine à fumer analytique de routine pour cigarettes -- Méthodes d'essais
complémentaires pour la vérification de la machine
Ta slovenski standard je istoveten z: ISO 7210:2013
ICS:
65.160 7REDNWREDþQLL]GHONLLQ Tobacco, tobacco products
RSUHPD and related equipment
SIST ISO 7210:2014 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 7210:2014

---------------------- Page: 2 ----------------------

SIST ISO 7210:2014
INTERNATIONAL ISO
STANDARD 7210
Third edition
2013-01-15
Routine analytical cigarette-smoking
machine — Additional test methods
for machine verification
Machine à fumer analytique de routine pour cigarettes — Méthodes
d’essais complémentaires pour la vérification de la machine
Reference number
ISO 7210:2013(E)
©
ISO 2013

---------------------- Page: 3 ----------------------

SIST ISO 7210:2014
ISO 7210:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO 7210:2014
ISO 7210:2013(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Determination of pressure drop . 2
4.1 Principle . 2
4.2 Apparatus . 2
4.3 Test atmosphere . 3
4.4 Procedure . 3
4.5 Expression of results . 4
5 Determination of significant puff profile parameters . 4
5.1 Principle . 4
5.2 Apparatus . 4
6 Verification of restricted smoking . 6
6.1 Principle . 6
6.2 Apparatus . 6
6.3 Procedure . 6
6.4 Expression of results . 7
© ISO 2013 – All rights reserved iii

---------------------- Page: 5 ----------------------

SIST ISO 7210:2014
ISO 7210:2013(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 7210 was prepared by Technical Committee ISO/TC 126, Tobacco and tobacco products, Subcommittee
SC 1, Physical and dimensional tests.
This third edition cancels and replaces the second edition (ISO 7210:1997), which has been
technically revised.
iv © ISO 2013 – All rights reserved

---------------------- Page: 6 ----------------------

SIST ISO 7210:2014
INTERNATIONAL STANDARD ISO 7210:2013(E)
Routine analytical cigarette-smoking machine —
Additional test methods for machine verification
1 Scope
This International Standard specifies additional test methods for routine analytical cigarette-smoking
machines intended to check the conformity of these machines with ISO 3308:2012, Clause 4.
It only establishes additional test methods for smoking machines and does not deal with actual smoking,
which is described in other International Standards.
It is composed of three sections relating to:
— the determination of pressure drop (Clause 4);
— the determination of significant puff profile parameters (Clause 5);
— the verification of restricted smoking (Clause 6).
NOTE There are more possibilities to determine the aforementioned parameters. Systems giving the same
results and accuracies can be used. The certificate of compliance with this International Standard may be obtained
from machine manufacturer. The frequency to carry out these additional test methods for smoking machines’
verification is not part of the scope of this International Standard.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies
...

NORME ISO
INTERNATIONALE 7210
Troisième édition
2013-01-15
Machine à fumer analytique de
routine pour cigarettes — Méthodes
d’essais complémentaires pour la
vérification de la machine
Routine analytical cigarette-smoking machine — Additional test
methods for machine verification
Numéro de référence
ISO 7210:2013(F)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 7210:2013(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2013
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2013 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 7210:2013(F)

Sommaire Page
Avant-propos .iv
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Détermination de la perte de charge . 2
4.1 Principe . 2
4.2 Appareillage. 2
4.3 Atmosphère d’essai . 3
4.4 Mode opératoire . 3
4.5 Expression des résultats . 4
5 Détermination des paramètres significatifs du profil de la bouffée .4
5.1 Principe . 4
5.2 Appareillage. 4
6 Vérification du fumage fermé. 6
6.1 Principe . 6
6.2 Appareillage. 6
6.3 Mode opératoire . 6
6.4 Expression des résultats . 7
© ISO 2013 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 7210:2013(F)

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (CEI) en ce qui concerne
la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives
ISO/CEI, Partie 2.
La tâche principale des comités techniques est d’élaborer les Normes internationales. Les projets de
Normes internationales adoptés par les comités techniques sont soumis aux comités membres pour vote.
Leur publication comme Normes internationales requiert l’approbation de 75 % au moins des comités
membres votants.
L’attention est appelée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable de
ne pas avoir identifié de tels droits de propriété et averti de leur existence.
L’ISO 7210 a été élaborée par le comité technique ISO/TC 126, Tabac et produits du tabac, sous-comité
SC 1, Essais physiques et dimensionnels.
Cette troisième édition annule et remplace la deuxième édition (ISO 7210:1997), qui a fait l’objet d’une
révision technique.
iv © ISO 2013 – Tous droits réservés

---------------------- Page: 4 ----------------------
NORME INTERNATIONALE ISO 7210:2013(F)
Machine à fumer analytique de routine pour cigarettes —
Méthodes d’essais complémentaires pour la vérification
de la machine
1 Domaine d’application
La présente Norme internationale spécifie des méthodes d’essais complémentaires relatives aux
machines à fumer analytiques de routine pour cigarettes, destinées à vérifier la conformité de ces
machines avec l’ISO 3308:2012, Article 4.
La présente Norme internationale ne fait qu’établir des méthodes d’essais complémentaires pour les
machines à fumer et ne traite pas du fumage proprement dit, qui est décrit dans d’autres Normes
internationales.
Elle est composée de trois sections distinctes relatives à
— la détermination de la perte de charge (Article 4),
— la détermination des paramètres significatifs du profil de la bouffée (Article 5), et
— la vérification du fumage fermé (Article 6).
NOTE Il existe d’autres moyens de déterminer ces paramètres. Tout système permettant d’obtenir les mêmes
résultats, avec le même niveau d’incertitude de mesure, peut être utilisé. Le certificat de conformité à la présente
Norme internationale peut être obtenu auprès du fabricant de la machine. La fréquence à laquelle sont réalisées
ces méthodes d’essais complémentaires pour la vérification de la machine à fumer ne fait pas partie du domaine
d’application de la présente Norme internationale.
2 Références normatives
Les documents de référence suivants sont indispensables pour l’application du présent document. Pour
les références datées, seule l’édition citée s’applique. Pour les références non datées, la dernière édition
du document de référence s’applique (y compris les éventuels amendements).
ISO 3308:2012, Machine à fumer analytique de routine pour cigarettes — Définitions et conditions normalisées
ISO 3402, Tabac et produits du tabac — Atmosphère de conditionnement et d’essai
3 Termes et définitions
Pour les besoins du présent document, les termes et définitions suivants s’appliquent.
3.1
perte de charge
différence de pression statique entre les deux extrémités d’un circuit pneumatique (de machine à fumer)
parcouru par un flux d’air dans des conditions de régime permanent, le débit volumétrique mesuré dans
les conditions normales à la sortie étant de 17,5 ml/s
3.2
profil de la bouffée
débit mesuré directement derrière
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.