Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995)

Cancels and replaces the first edition (1980). Gives the definition of DN (nominal size) when applied to components of a pipework system, as specified in those standards which use the DN designation system. Gives a list of preferred DN values.

Rohrleitungsteile - Definition und Auswahl von DN (Nennweite) (ISO 6708:1995)

Diese Norm legt die Definition von DN (Nennweite) bei Bauteilen von Rohrleitungen fest, die in Normen, die das DN-System verwenden, festgelegt sind. Anmerkung 1: Andere Bezeichnungsweisen sind auch gebräuchlich, z.B. Erzeugnisse mit Gewinde oder Schneidringverbindungen, gelöteten oder geschweißten Verbindungen oder Erzeugnisse die mit NPS, OD (Außendurchmesser) oder ID (Innendurchmesser) bezeichnet sind, diese sind jedoch nicht in dieser Norm definiert.

Composants de réseau de tuyauteries - Définition et sélection des DN (diametre nominal) (ISO 6708:1995)

La présente Norme internationale donne la définition de DN (diamètre nominal) lorsqu'elle est appliquée à des composants d'un réseau de tuyauteries, comme spécifié dans celles des normes qui utilisent le système de désignation par DN.  
NOTE 1 D'autres méthodes de désignation de dimension sont aussi utilisées, par exemple produits ayant des extrémités à raccordements filetés, à compression, brasés ou soudés, ou produits désignés par NPS (dimension nominale du tube), DE (diamètre extérieur), DI (diamètre intérieur), mais celles-ci ne sont pas définies dans la présente Norme internationale. La présente Norme internationale donne une liste des valeurs de DN préférentielles.

Elementi za cevovode - Definicija in izbira DN (imenski premer) (ISO 6708: 1995)

General Information

Status
Published
Publication Date
30-Sep-1998
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Oct-1998
Due Date
01-Oct-1998
Completion Date
01-Oct-1998

Buy Standard

Standard
EN ISO 6708:1998
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6708:1998
01-oktober-1998
Elementi za cevovode - Definicija in izbira DN (imenski premer) (ISO 6708: 1995)
Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995)
Rohrleitungsteile - Definition und Auswahl von DN (Nennweite) (ISO 6708:1995)
Composants de réseau de tuyauteries - Définition et sélection des DN (diametre
nominal) (ISO 6708:1995)
Ta slovenski standard je istoveten z: EN ISO 6708:1995
ICS:
23.040.01 Deli cevovodov in cevovodi Pipeline components and
na splošno pipelines in general
SIST EN ISO 6708:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 6708:1998

---------------------- Page: 2 ----------------------

SIST EN ISO 6708:1998

---------------------- Page: 3 ----------------------

SIST EN ISO 6708:1998

---------------------- Page: 4 ----------------------

SIST EN ISO 6708:1998
INTERNATIONAL
STANDARD
Second edition
1995-07-01
Pipework components - Definition and
selection of DN (nominal size)
Composants de r&eau de tuyauteries - Dgfinition et s&ection des DN
(diam&re nominal)
Reference number
IS0 6708: 1995(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 6708:1998
IS0 6708:1995(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 6708 was prepared by Technical Committee
lSO/TC 5, Ferrous metal pipes and metallic fittings, Subcommittee SC 10,
Metallic flanges and their joints.
This
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.