Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index

This European Standard describes the reference method, used for type testing and in case of dispute, for determination of the flakiness index of aggregates. For other purposes, in particular production control, other methods may be used, provided that an appropriate working relationship with the reference method has been established.
This European Standard applies to natural, manufactured or recycled aggregates.
The test procedure specified in this part of this European Standard is not applicable to particle sizes less

Prüfverfahren für geometrische Eigenschaften von Gesteinskörnungen - Teil 3: Bestimmung der Kornform - Plattigkeitskennzahl

Diese Europäische Norm beschreibt das Referenzverfahren, das für die Typprüfung und im Streitfall für die
Bestimmung der Plattigkeitskennzahl von Gesteinskörnungen angewendet wird. Für andere Zwecke, speziell
im Rahmen der werkseigenen Produktionskontrolle, dürfen andere Verfahren angewendet werden, sofern ein
ausreichender Zusammenhang mit dem Referenzverfahren nachgewiesen wurde.
Diese Europäische Norm gilt für Gesteinskörnungen, die natürlicher, künstlicher (industrieller) Herkunft oder
aus recyclierten Stoffen hergestellt sind.
Das in diesem Teil der Europäischen Norm festgelegte Verfahren gilt nicht für Korngrößen < 4 mm oder
> 100 mm.

Essais pour déterminer les caractéristiques géométriques des granulats - Partie 3: Détermination de la forme des granulats - Coefficient d'aplatissement

La présente Norme européenne décrit la méthode de référence servant aux essais de type initiaux et, en cas de désaccord, à la détermination du coefficient d’aplatissement des granulats. Pour les besoins du contrôle de la production en particulier, d’autres méthodes peuvent être utilisées sous réserve qu’une corrélation appropriée avec la méthode de référence  ait été établie.
La présente Norme européenne s’applique à des agrégats naturels, artificiels ou recyclés.
Le mode opératoire de l'essai indiqué dans cette partie de la norme européenne ne s'applique pas aux particules de dimension inférieure à 4 mm ou supérieure à 100 mm.

Preskusi geometričnih lastnosti agregatov - 3. del: Določevanje oblike zrn - Modul ploščatosti

Ta evropski standard opisuje referenčno metodo, ki se uporablja za tipsko preskušanje in v primeru spora za določevanje modula ploščatosti agregatov. Za druge namene, zlasti za kontrolo proizvodnje, se lahko uporabijo druge metode, če obstaja primerna delovna povezava z referenčno metodo. Ta evropski standard se uporablja za naravne, umetne ali reciklirane agregate. Preskusni postopek iz tega dela tega evropskega standarda se ne uporablja za zrna, manjša od 4 mm ali večja od 100 mm.

General Information

Status
Published
Public Enquiry End Date
19-Jul-2011
Publication Date
11-Apr-2012
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
27-Mar-2012
Due Date
01-Jun-2012
Completion Date
12-Apr-2012

Relations

Buy Standard

Standard
EN 933-3:2012
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SORãþDWRVWLPrüfverfahren für geometrische Eigenschaften von Gesteinskörnungen - Teil 3: Bestimmung der Kornform - PlattigkeitskennzahlEssais pour déterminer les caractéristiques géométriques des granulats - Partie 3: Détermination de la forme des granulats - Coefficient d'aplatissementTests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 933-3:2012SIST EN 933-3:2012en,fr,de01-maj-2012SIST EN 933-3:2012SLOVENSKI
STANDARDSIST EN 933-3:1999/A1:2004SIST EN 933-3:19991DGRPHãþD



SIST EN 933-3:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 933-3
January 2012 ICS 91.100.15 Supersedes EN 933-3:1997English Version
Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
Essais pour déterminer les caractéristiques géométriques des granulats - Partie 3: Détermination de la forme des granulats - Coefficient d'aplatissement
Prüfverfahren für geometrische Eigenschaften von Gesteinskörnungen - Teil 3: Bestimmung der Kornform - Plattigkeitskennzahl This European Standard was approved by CEN on 29 October 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 933-3:2012: ESIST EN 933-3:2012



EN 933-3:2012 (E) 2 Contents Page Foreword . 31Scope. 52Normative references . 53Terms and definitions . 54Principle . 65Apparatus . 66Preparation of test portions . 87Procedure . 87.1Sieving on test sieves. 87.2Sieving on bar sieves . 88Calculation and expression of results . 89Test report . 99.1Mandatory data . 99.2Optional data . 9Annex A (informative)
Example of test data sheet . 10Annex B (informative)
Precision . 11
SIST EN 933-3:2012



EN 933-3:2012 (E) 3 Foreword This document (EN 933-3:2012) has been prepared by Technical Committee CEN/TC 154 “Aggregates”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2012, and conflicting national standards shall be withdrawn at the latest by July 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 933-3:1997. The following changes have been made to the previous edition: a) the CEN Technical Specification has been adopted as European Standard; b) the document has been editorially revised. This standard forms part of a series of tests for geometrical properties of aggregates. Test methods for other properties are covered by the following European Standards: EN 932 Tests for general properties of aggregates; EN 1097 Tests for mechanical and physical properties of aggregates; EN 1367 Tests for thermal and weathering properties of aggregates; EN 1744 Tests for chemical properties of aggregates; EN 13179 Tests for filler aggregate used in bituminous mixtures. EN 933, Tests for geometrical properties of aggregates, consists of the following parts:  Part 1: Determination of particle size distribution — Sieving method;  Part 2: Determination of particle size distribution — Test sieves, nominal size of apertures;
Part 3: Determination of particle shape — Flakiness index;  Part 4: Determination of particle shape — Shape index;  Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles;  Part 6: Assessment of surface characteristics — Flow coefficient of aggregates;  Part 7: Determination of shell content — Percentage of shells for coarse aggregates;  Part 8: Assessment of fines — Sand equivalent test; SIST EN 933-3:2012



EN 933-3:2012 (E) 4  Part 9: Assessment of fines — Methylene blue test;  Part 10: Assessment of fines — Grading of filler aggregates (air jet sieving);  Part 11: Classification test for the constituents of coarse recycled aggregate. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 933-3:2012



EN 933-3:2012 (E) 5 1 Scope This European Standard describes the reference method, used for type testing and in case of dispute, for determination of the flakiness index of aggregates. For other purposes, in particular production control, other methods may be used, provided that an appropriate working relationship with the reference method has been established. This European Standard applies to natural, manufactured or recycled aggregates. The test procedure specified in this part of this European Standard is not applicable to particle sizes less than 4 mm or greater than 100 mm. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 932-2, Tests
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.