Vitreous and porcelain enamels - Low voltage test for detecting and locating defects (ISO 8289:2000)

Two low voltage tests for detecting and locating defects that extend to the basis metal in vitreous and porcelain enamel coatings.

Emails und Emaillierungen - Niedrigspannungsprüfung zum Nachweis und Lokalisieren von Fehlstellen (ISO 8289:2000)

Anwendungsbereich
Diese Internationale Norm legt zwei Niedrigspannungsprüfungen zum Nachweis und Lokalisieren von Fehlstellen in Email-Überzügen, die bis zum Grundmetall durchgehen, fest.
Verfahren A (elektronisches Verfahren) ist geeignet für den raschen Nachweis und die Grobbestimmung der Lage der Fehlstellen. Verfahren B (optisches Verfahren), das auf Farbeffekten beruht, ist geeignet für den präziseren Nachweis von Fehlstellen und ihrer exakten Lage. Verfahren A wird gewöhnlich für ebene Oberflächen angewendet, wogegen Verfahren B für kompliziertere Formen bevorzugt wird.
ANMERKUNG 1   Die Auswahl des richtigen Prüfverfahrens zur Unterscheidung von Bereichen erhöhter Leitfähigkeit, die mit dem Verfahren B nachgewiesen wurden, von vorhandenen Poren, die bis zum Grundmetall durchgehen und mit beiden Verfahren nachgewiesen werden können, ist kritisch.
ANMERKUNG 2   Die Niedrigspannungsprüfung ist ein zerstörungsfreies Verfahren für den Nachweis von Fehlstellen (siehe Abschnitt 3) und ist daher vollständig verschieden im Vergleich zur Hochspannungsprüfung nach ISO 2746. Die Ergebnisse von Hoch- und Niedrigspannungsprüfungen sind nicht vergleichbar und abweichend voneinander.

Emaux vitrifiés - Essai a basse tension pour la détection et la localisation des défauts (ISO 8289:2000)

La présente Norme internationale spécifie deux méthodes d'essai à basse tension permettant de détecter et de localiser les défauts s'étendant jusqu'au métal de base sur les articles en émail vitrifié. La méthode A (électrique) convient pour une détection rapide et une localisation globale des défauts. La méthode B (optique), basée sur des effets de couleur convient pour une détection sensible et une localisation exacte des défauts. La méthode A est généralement appliquée aux surfaces planes, tandis que la méthode B est recommandée pour des formes plus complexes.
NOTE 1 Le choix de la méthode d'essai appropriée est essentiel pour distinguer les zones de conductivité accrue détectées par la méthode B, des pores effectifs qui s'étendent jusqu'au métal de base, lesquels peuvent être détectés par les deux méthodes.
NOTE 2 L'essai à basse tension est une méthode d'essai non destructif permettant la détection des défauts (voir article 3), et n'a donc rien à voir avec l'essai à haute tension spécifié dans l'ISO 2746. Il n'est par conséquent pas possible de comparer les résultats des essais des deux méthodes.

Steklasti in porcelanski emajli - Nizkonapetostni preskus za odkrivanje in lociranje napak (ISO 8289:2000)

General Information

Status
Withdrawn
Publication Date
28-Feb-2002
Withdrawal Date
10-Mar-2020
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
10-Mar-2020
Due Date
02-Apr-2020
Completion Date
11-Mar-2020

Relations

Buy Standard

Standard
EN ISO 8289:2002
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8289:2002
01-marec-2002
Steklasti in porcelanski emajli - Nizkonapetostni preskus za odkrivanje in lociranje
napak (ISO 8289:2000)
Vitreous and porcelain enamels - Low voltage test for detecting and locating defects (ISO
8289:2000)
Emails und Emaillierungen - Niedrigspannungsprüfung zum Nachweis und Lokalisieren
von Fehlstellen (ISO 8289:2000)
Emaux vitrifiés - Essai a basse tension pour la détection et la localisation des défauts
(ISO 8289:2000)
Ta slovenski standard je istoveten z: EN ISO 8289:2001
ICS:
25.220.50 Emajlne prevleke Enamels
SIST EN ISO 8289:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8289:2002

---------------------- Page: 2 ----------------------

SIST EN ISO 8289:2002
EUROPEAN STANDARD
EN ISO 8289
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2001
ICS 25.220.50
English version
Vitreous and porcelain enamels - Low voltage test for detecting
and locating defects (ISO 8289:2000)
Emaux vitrifiés - Essai à basse tension pour la détection et Emails und Emaillierungen - Niedrigspannungsprüfung zum
la localisation des défauts (ISO 8289:2000) Nachweis und Lokalisieren von Fehlstellen (ISO
8289:2000)
This European Standard was approved by CEN on 24 June 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8289:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 8289:2002
EN ISO 8289:2001 (E)
CORRECTED 2001-09-26
Foreword
The text of the International Standard from Technical Committee ISO/TC 107 "Metallic and
other inorganic coatings" of the International Organization for Standardization (ISO) has been
taken over as an European Standard by Technical Committee CEN/TC 262 "Metallic and
other inorganic coatings", the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by February 2002, and conflicting national
standards shall be withdrawn at the latest by February 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United
Kingdom.
Endorsement notice
The text of the International Standard ISO 8289:2000 has been approved by CEN as a
European Standard without any modification.
2

---------------------- Page: 4 ----------------------

SIST EN ISO 8289:2002
INTERNATIONAL ISO
STANDARD 8289
Second edition
2000-08-01
Vitreous and porcelain enamels — Low
voltage test for detecting and locating
defects
Émaux vitrifiés — Essai à basse tension pour la détection et la localisation
des défauts
Reference number
ISO 8289:2000(E)
© ISO 2000

---------------------- Page: 5 ----------------------

SIST EN ISO 8289:2002
ISO 8289:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be
edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,
parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2000
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, elec-
tronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's mem-
ber body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
©
ii ISO 2000 – All rights reserved

---------------------- Page: 6 ----------------------

SIST EN ISO 8289:2002
ISO 8289:2000(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical com-
mittees. Each member body interested in a subject for which a technical committee has been established has the
right to be represented on that committee. International organizations, governmental and non-governmental, in liai-
son with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 8289 was prepared by Technical Committee ISO/TC 107, Metallic and other inorganic
coatings.
This second edition cancels and replaces the first edition (ISO 8289:1986), which has been technically revised.
©
ISO 2000 – All rights reserved iii

---------------------- Page: 7 ----------------------

SIST EN ISO 8289:2002

---------------------- Page: 8 ----------------------

SIST EN ISO
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.