oSIST prEN 1012-3:2008

Oznaka standarda: oSIST prEN 1012-3:2008
Koda projekta: 00232009
Organizacija: SIST
Naslov (angleški): Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
Naslov (slovenski): Kompresorji in vakuumske črpalke - Varnostne zahteve - 3. del: Procesni kompresorji
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 20% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
oSIST prEN 1012-3:2008 angleški jezik Active SIST-G: 66.00 EUR
PDF
Papir
Tehnični odbor: I13 - Imaginarni 13
ICS: 23.140 23.160
Status: Neobjavljen
Področje projekta (angleško): This part of EN 1012 is applicable to compressors having an operating pressure greater than 0,5 bar and designed to utilise all gases other than air, nitrogen or inert gases which are covered in part 1. The standard lists the significant hazards associated with compressors and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of compressors during their foreseeable lifetime and subsequent disposal. This part of EN 1012 includes under the general term compressors, those machines which comprise; - the compressor itself - a prime mover - any component or device supplied which is necessary for safe operation of the compressor. In addition it applies to partly completed compressors having a compressor in combination with some of these components as well as compressor assemblies operating in combination. Excluded are refrigerant compressors used in refrigerating systems or heat pumps as defined in EN 378-1.

Najbolje prodajani standardi