SIST EN 4710-005:2015
(Main)Aerospace series - Quick release fastening systems for non-structural applications - Part 005: Spring clamp - Two ways tolerance compensation
Aerospace series - Quick release fastening systems for non-structural applications - Part 005: Spring clamp - Two ways tolerance compensation
This European Standard specifies the dimensions, mass, tolerances and static values of catch spring for
use in fuselage interior equipment and non-structural or secondary structural area.
This European Standard is to be used in conjunction with EN 4710-06 and EN 4710-07 as described in
EN 4710-02.
The applicable temperature range is -55 °C to 85 °C.
Luft- und Raumfahrt - Druckverschlüsse nicht-strukturelle Anwendungen - Teil 005: Feder Clip - Zweifacher Toleranzausgleich
Diese Europäische Norm legt die Maße, Massen, Toleranzen und statischen Werte von Federclips für die Anwendung bei Inneneinrichtungen von Luftfahrzeugen und in nicht-strukturellen oder Sekundärstrukturbereichen fest.
Diese Europäische Norm ist in Verbindung mit EN 4710-06 und EN 4710-07 wie in EN 4710-02 beschrieben anzuwenden.
Der gültige Temperaturbereich ist zwischen −55 °C und 85 °C.
Série aérospatiale - Fixations rapides filetées pour applications non-structurales - Partie 005 : Collier lyre - Deux degrés de liberté
La présente Norme européenne spécifie les dimensions, la masse, les tolérances et les valeurs statiques des colliers lyres pour utilisation dans les équipements intérieurs et dans les zones non structurales ou structurales secondaires du fuselage.
La présente Norme européenne doit être utilisée conjointement avec les EN 4710-06 et EN 4710-07 comme défini dans l’EN 4710-02.
La gamme de température applicable est comprise entre - 55 °C et 85 °C.
Aeronavtika - Spončni sistemi za hitro sprostitev za nestrukturne aplikacije - 005. del: Vzmetna objemka - Dvostranska tolerančna izravnava
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Druckverschlüsse nicht-strukturelle Anwendungen - Teil 005: Feder Clip - Zweifacher ToleranzausgleichSérie aérospatiale - Fixations rapides filetées pour applications non-structurales - Partie 005 : Collier lyre - Deux degrés de libertéAerospace series - Quick release fastening systems for non-structural applications - Part 005: Spring clamp - Two ways tolerance compensation49.030.01Vezni elementi na splošnoFasteners in generalICS:Ta slovenski standard je istoveten z:EN 4710-05:2015SIST EN 4710-005:2015en,fr,de01-december-2015SIST EN 4710-005:2015SLOVENSKI
STANDARD
SIST EN 4710-005:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4710-05
October
t r s w ICS
v {ä r u w English Version
Aerospace series æ Quick release fastening systems for nonæstructural applications æ Part
r wã Spring clamp æ Two ways tolerance compensation Série aérospatiale æ Fixations rapides filetées pour applications nonæstructurales æ Partie
r w ã Collier lyre æDeux degrés de liberté
Luftæ und Raumfahrt æ Schnellverschlüsse für nichtæstrukturelle Anwendungen æ Teil
r wã Federclip æ Zweifacher Toleranzausgleich This European Standard was approved by CEN on
w March
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s w CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v y s ræ r wã t r s w ESIST EN 4710-005:2015
EN 4710-05:2015 (E) 2 Contents
Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Requirements . 4 4 Designation. 6 5 Marking . 6 6 Technical specification . 7
SIST EN 4710-005:2015
EN 4710-05:2015 (E) 3 European foreword This document (EN 4710-05:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2016, and conflicting national standards shall be withdrawn at the latest by April 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.