Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board

This document describes procedures for the testing of dyed paper and board intended to come into contact with foodstuffs. Two procedures are given. Procedure A for contact of long duration (e. g. food packaging) and procedure B for contact of short duration (e. g. napkins, kitchen papers, household papers).
Visual evaluation against a blank is used only in order to detect any bleeding (yes/no) while evaluation against a grey scale provides grading of the bleeding.

Papier und Pappe vorgesehen für den Kontakt mit Lebensmitteln - Bestimmung der Farbechtheit von gefärbtem Papier und Pappe

Dieses Dokument legt ein Verfahren zur Prüfung von gefärbtem Papier und Pappe, die bestimmungsgemäß in
Kontakt mit Lebensmitteln kommen, fest. Es werden zwei Varianten angegeben: Verfahren A für langzeitigen
Kontakt (z. B. Lebensmittelverpackung) und Verfahren B für kurzzeitigen Kontakt (z. B. Servietten,
Küchentücher, Haushaltspapiere).
Visuelle Auswertung gegen eine Blindprobe wird nur durchgeführt, um ein generelles Ausbluten festzustellen
(ja/nein), während eine Auswertung gegen einen Graumaßstab eine Abstufung beim Ausbluten zulässt.

Papiers et cartons destinés a entrer en contact avec les denrées alimentaires - Détermination de la solidité de la couleur des papiers et cartons colorés

Le présent document décrit deux mode opératoires d’essai pour papiers et cartons colorés destinés a entrer
en contact avec les denrées alimentaires. Le mode opératoire A s’applique a ceux ayant un contact de longue
durée avec les denrées (emballage des aliments, par exemple) et le mode opératoire B a ceux ayant avec ces
dernieres un contact de courte durée (serviettes de table, papier essuie-tout, papiers a usage domestique, par
exemple).
L’examen visuel par rapport a un « blanc » n’est utilisé qu’afin de détecter un éventuel dégorgement (oui/non)
alors que l’évaluation par rapport a une échelle de gris permet un classement de celui-ci.

Papir, karton in lepenka, namenjeni neposrednemu stiku z živili - Ugotavljanje obstojnosti barve v obarvanem papirju, kartonu in lepenki

General Information

Status
Withdrawn
Publication Date
31-Aug-2006
Withdrawal Date
10-Dec-2018
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
10-Dec-2018
Due Date
02-Jan-2019
Completion Date
11-Dec-2018

Relations

Buy Standard

Standard
EN 646:2006
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and boardPapir, karton in lepenka, namenjeni neposrednemu stiku z živili - Ugotavljanje obstojnosti barve v obarvanem papirju, kartonu in lepenkiPapiers et cartons destinés a entrer en contact avec les denrées alimentaires - Détermination de la solidité de la couleur des papiers et cartons colorésPapier und Pappe vorgesehen für den Kontakt mit Lebensmitteln - Bestimmung der Farbechtheit von gefärbtem Papier und PappeTa slovenski standard je istoveten z:EN 646:2006SIST EN 646:2006en85.06067.250ICS:SIST EN 646:20021DGRPHãþDSLOVENSKI
STANDARDSIST EN 646:200601-september-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 646April 2006ICS 67.250; 85.060Supersedes EN 646:2000
English VersionPaper and board intended to come into contact with foodstuffs -Determination of colour fastness of dyed paper and boardPapiers et cartons destinés à entrer en contact avec lesdenrées alimentaires - Détermination de la solidité de lacouleur des papiers et cartons colorésPapier und Pappe vorgesehen für den Kontakt mitLebensmitteln - Bestimmung der Farbechtheit vongefärbtem Papier und PappeThis European Standard was approved by CEN on 28 March 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 646:2006: E



EN 646:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.4 5 Materials and equipment.4 6 Reagents.5 7 Sampling.5 8 Preparation of sample.6 9 Procedure A (long duration contact).6 10 Procedure B (short time contact).6 11 Evaluation.6 12 Report.7 Bibliography.8



EN 646:2006 (E) 3 Foreword This document (EN 646:2006) has been prepared by Technical Committee CEN/TC 172 “Pulp, paper and board”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2006, and conflicting national standards shall be withdrawn at the latest by October 2006. This document supersedes EN 646:2000. With regard to EN 646:2000 the following changes have been made: a) the test fluid "sodium carbonate solution" has been omitted and the test fluid "saliva simulant" has been introduced to cover a demand; b) editorial changes. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



EN 646:2006 (E) 4 1 Scope This document describes procedures for the testing of dyed paper and board intended to come into contact with foodstuffs. Two procedures are given. Procedure A for contact of long duration (e. g. food packaging) and procedure B for contact of short duration (e. g. napkins, kitchen papers, household papers). Visual evaluation against a blank is used only in order to detect any bleeding (yes/no) while evaluation against a grey scale provides grading of the bleeding. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 8787, Paper and board — Determination of capillary rise — Klemm method 3 Terms and definitions For the purposes of this document, the following term and definition applies. colour fastness lack of transfer of colour from a paper to a non stained glass-fibre paper, saturated with a test fluid and evaluated visually for staining against a grey scale or a blank 4 Principle A sample is brought into contact with glass fibre papers which have been saturated with a test fluid and placed under load for a given time. The staining of the glass fibre paper is evaluated with the grey scale. The staining of the glass fibre paper is evaluated against a blank or grey scale. The test fluids used are
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.