SIST EN 15094:2008

Oznaka standarda: SIST EN 15094:2008
Koda projekta: 00322004
Organizacija: SIST
Naslov (angleški): Safety of Machinery - Safety requirements for cold flat rolling mills
Naslov (slovenski): Varnost strojev - Varnostne zahteve za valjarne (hladno valjanje)
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 20% popust pri spodnji ceni brez DDV. Cenik SIST
Dokumenti
Ime Jezik Status Cena Dodaj v košarico
SIST EN 15094:2008 angleški jezik Withdrawn SIST-K: 101.64 EUR
PDF
Papir
Tehnični odbor: I13 - Imaginarni 13
ICS: 13.110 25.120.20
Status: Razveljavljen
Objavljen: 01-Dec-2008
Refer. št. objave: Sporočila 2008-12
Razveljavitev: 01-Jul-2022
Referenca razveljavitve: Sporocila 2022-07
Referenčna oznaka: EN 15094:2008
Področje projekta (angleško): This European Standard specifies the general safety requirements for cold rolling mills for flat products. It describes the foreseeable, significant hazards - so far as this is possible for this particular machinery - and indicates possible preventative measures for avoiding the hazards and reducing the risks. Manufacturers shall perform a risk assessment specific to their machinery, its use and environment (other machinery, buildings etc.) in order to determine which hazards are significant and decide the preventative measures to be taken (see Annex H). This standard deals with significant hazards, hazardous situations and events relevant to cold rolling mills for flat products. It deals not only with circumstances where the machinery is used as intended, but also includes other conditions foreseen by the manufacturer, such as foreseeable faults, malfunctions or misuse (see clauses 4 and 5). This standard assumes that the machinery is used with adequate workplace lighting conforming to EN 12464-1 or to local regulations. This standard applies to: Plant and equipment used for the manufacturing of metal cold rolled flat products from the material entry station, through the forming stations, to the exit
Povezava na standarde
Povezava Ime Datum
Revidiran SIST EN 15094:2022 - Varnost strojev - Varnostne zahteve za valjarne (hladno valjanje) 06-Feb-2019
Nadomeščen z SIST EN 15094:2022 - Varnost strojev - Varnostne zahteve za valjarne (hladno valjanje) 11-May-2022


• Slovenski standardi SIST s cenovnim razredom AC so popravki standardov in so v večini primerov brezplačni.

• Slovenski standardi SIST s cenovnim razredom AP so privzeti tuji standardi, katerih sestavni del je izvirni standard, ki ga moramo pridobiti pri izdajatelju v tujini. Naročilo pošljite na: prodaja@sist.si.

Najbolje prodajani standardi