iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50083-6:1995

(Main)

Cabled distribution systems for television and sound signals -- Part 6: Optical equipment

Cabled distribution systems for television and sound signals -- Part 6: Optical equipment

This standard - applies to all optical transmitters, receivers, amplifiers, splitters, directional couplers, isolators, multiplexers, connectors and splices used in cabled distribution systems; - covers the frequency range 5 MHz to 1 750 MHz; - identifies guaranteed performance requirements for certain parameters; - lays down data publication requirements with guaranteed performance; - describes methods of measurement for compliance testing. All requirements and published data relate to minimum performance levels within the specified frequency range and in well matched conditions as might be applicable to cabled distribution systems for television and sound.

Kabelverteilsysteme für Ton- und Fernsehrundfunk-Signale -- Teil 6: Optische Geräte

Systèmes de distribution par câble destinés aux signaux de radiodiffusion sonore et de télévision -- Partie 6: Matériels optiques

Kabelski distribucijski sistemi za televizijsko in zvokovno radiofuzijo - 6. del: Komponente za prenos signalov po optičnih vlaknih

General Information

Status
Withdrawn
Publication Date
28-Feb-1995
Withdrawal Date
28-Feb-1995
ICS
33.060.40 - Cabled distribution systems
Technical Committee
RZV - Radiocommunication
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Mar-1995
Due Date
01-Mar-1995
Completion Date
01-Mar-1995
Directive
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
EN 50083-6:1994 - Cabled distribution systems for television and sound signals - Part 6: Optical equipment

Relations

Revised
SIST EN 50083-6:1999 - Cable networks for television signals, sound signals and interactive services -- Part 6: Optical equipment
Effective Date
13-May-2010
Replaced By
SIST EN 50083-6:1999 - Cable networks for television signals, sound signals and interactive services -- Part 6: Optical equipment
Effective Date
28-Jan-2023
Replaced By
SIST EN 50083-6:1999 - Cable networks for television signals, sound signals and interactive services -- Part 6: Optical equipment
Effective Date
07-Jun-2022

Buy Standard

EN 50083-6:1995EN 50083-6:1995
PreviousNext
Standard
EN 50083-6:1995
English language
62 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50083-6:1995
01-marec-1995
.DEHOVNLGLVWULEXFLMVNLVLVWHPL]DWHOHYL]LMVNRLQ]YRNRYQRUDGLRIX]LMRGHO
.RPSRQHQWH]DSUHQRVVLJQDORYSRRSWLþQLKYODNQLK
Cabled distribution systems for television and sound signals -- Part 6: Optical equipment
Kabelverteilsysteme für Ton- und Fernsehrundfunk-Signale -- Teil 6: Optische Geräte
Systèmes de distribution par câble destinés aux signaux de radiodiffusion sonore et de
télévision -- Partie 6: Matériels optiques
Ta slovenski standard je istoveten z: EN 50083-6:1994
ICS:
33.060.40 Kabelski razdelilni sistemi Cabled distribution systems
SIST EN 50083-6:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 2 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 3 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 4 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 5 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 6 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 7 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 8 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 9 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 10 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 11 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 12 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 13 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 14 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 15 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 16 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 17 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 18 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 19 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 20 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 21 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 22 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 23 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 24 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 25 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 26 ----------------------

SIST EN 50083-6:1995

---------------------- Page: 27 ----------------------

SIST EN 50083-6:1995

---------------------- Pag
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST ES 203 811-6 V1.1.1:2023(Main)
Integrated broadband cable telecommunication networks (CABLE) - Sixth generation transmission systems for interactive cable television services - IP cable modem - Part 6: Security - DOCSIS® 4.0 [ANSI/SCTE 262-5 2020]
ETSI ES 203 811-6 V1.1.1 (2022-09)

The present document provides the ETSI endorsement of ANSI/SCTE standard ANSI/SCTE 262-5 [1].
ANSI/SCTE 262-5 [1] is part of a series of standards that defines the sixth generation of high-speed data-over-cable
systems and is based on a set of specifications commonly referred to as DOCSIS 4.0 specifications. This generation of
the DOCSIS specifications builds upon the previous generations of DOCSIS specifications (commonly referred to as
the DOCSIS 3.1 and earlier specifications), leveraging the existing Media Access Control (MAC) and Physical (PHY)
layers with the addition of appropriate updates to the MAC and management layer to support new PHY functionality. It
includes backward compatibility for the existing PHY layers in order to enable a seamless migration to the new
technology.
ANSI/SCTE 262-5 [1] defines the security requirements, and corresponds to the CableLabs specification
CM-SP-SECv4.0-I01-190815 [i.1].

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
  • Standardization document
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ES 203 811-3 V1.1.1:2023(Main)
Integrated broadband cable telecommunication networks (CABLE) - Sixth generation transmission systems for interactive cable television services - IP cable modem - Part 3: MAC and upper layer protocol interfaces - DOCSIS® 4.0 [ANSI/SCTE 262-2 2020]
ETSI ES 203 811-3 V1.1.1 (2022-09)

The present document provides the ETSI endorsement of ANSI/SCTE standard ANSI/SCTE 262-2 [1].
ANSI/SCTE 262-2 [1] is part of a series of standards that defines the sixth generation of high-speed data-over-cable
systems and is based on a set of specifications commonly referred to as DOCSIS 4.0 specifications. This generation of
the DOCSIS specifications builds upon the previous generations of DOCSIS specifications (commonly referred to as
the DOCSIS 3.1 and earlier specifications), leveraging the existing Media Access Control (MAC) and Physical (PHY)
layers with the addition of appropriate updates to the MAC and management layers to support new PHY functionality.
It includes backward compatibility for the existing PHY layers in order to enable a seamless migration to the new
technology.
ANSI/SCTE 262-2 [1] defines the interface for the MAC and upper layer protocols, and corresponds to the CableLabs
specification CM-SP-MULPIv4.0-I01-190815 [i.1].

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
  • Standardization document
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ES 203 811-5 V1.1.1:2023(Main)
Integrated broadband cable telecommunication networks (CABLE) - Sixth generation transmission systems for interactive cable television services - IP cable modem - Part 5: Converged Cable Access Platform (CCAP) operations support system interface - DOCSIS® 4.0 [ANSI/SCTE 262-4 2020]
ETSI ES 203 811-5 V1.1.1 (2022-09)

The present document provides the ETSI endorsement of ANSI/SCTE standard ANSI/SCTE 262-4 [1].
ANSI/SCTE 262-4 [1] is part of a series of standards that defines the sixth generation of high-speed data-over-cable
systems and is based on a set of specifications commonly referred to as DOCSIS 4.0 specifications. This generation of
the DOCSIS specifications builds upon the previous generations of DOCSIS specifications (commonly referred to as
the DOCSIS 3.1 and earlier specifications), leveraging the existing Media Access Control (MAC) and Physical (PHY)
layers with the addition of appropriate updates to the MAC and management layer to support new PHY functionality. It
includes backward compatibility for the existing PHY layers in order to enable a seamless migration to the new
technology.
ANSI/SCTE 262-4 [1] defines the requirements necessary for the configuration, fault management and performance
management of Cable Modem Termination Systems (CMTS) and the Converged Cable Access Platform (CCAP)
system. The intent of the standard is to define a common, cross-vendor set of functionality for the configuration and
management of CMTSs and CCAPs.
The present document defines a standard configuration information model for the configuration of the CCAP. The
present document also defines the SNMP management requirements for a CCAP. These SNMP requirements include
both protocol conformance and management object definitions, based largely upon existing industry standard
management objects found in DOCSIS CMTSs and universal EQAMs. In addition, The present document defines the
standard event messaging requirements of a CCAP system.
ANSI/SCTE 262-4 [1] corresponds to the CableLabs specification CM-SP-CCAP-OSSIv4.0-I02-200311 [i.1].

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
  • Standardization document
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ES 203 811-2 V1.1.1:2023(Main)
Integrated broadband cable telecommunication networks (CABLE) - Sixth generation transmission systems for interactive cable television services - IP cable modem - Part 2: Physical layer - DOCSIS® 4.0 [ANSI/SCTE 262-1 2020]
ETSI ES 203 811-2 V1.1.1 (2022-09)

The present document provides the ETSI endorsement of ANSI/SCTE standard ANSI/SCTE 262-1 [1].
ANSI/SCTE 262-1 [1] is part of a series of standards that defines the sixth generation of high-speed data-over-cable
systems and is based on a set of specifications commonly referred to as DOCSIS 4.0 specifications. This generation of
the DOCSIS specifications builds upon the previous generations of DOCSIS specifications (commonly referred to as
the DOCSIS 3.1 and earlier specifications), leveraging the existing Media Access Control (MAC) and Physical (PHY)
layers. It includes backward compatibility for the existing PHY layers in order to enable a seamless migration to the
new technology. Further, the DOCSIS 4.0 specifications introduce Full Duplex (FDX) DOCSIS PHY layer technology
as an expansion of the OFDM PHY layer introduced in the DOCSIS 3.1 PHY specification to increase upstream
capacity without significant loss of downstream capacity versus DOCSIS 3.1. The DOCSIS 4.0 specification also builds
upon DOCSIS 3.1 OFDM and OFDMA technology with an extended Frequency Division Duplex (FDD) DOCSIS
alternative. DOCSIS 4.0 FDD supports legacy high split and also provides extended splits up to 684 MHz in an
operational band plan which is referred to as Ultra-High Split (UHS). DOCSIS 4.0 FDD also introduces expansion of
usable downstream spectrum up to 1 794 MHz. Both the FDX and FDD DOCSIS 4.0 alternatives are based on OFDM
PHY.
There are differences in the cable spectrum planning practices adopted for different networks in the world. For the
OFDM PHY layer defined in the present document, there is flexibility to deploy the technology in any spectrum plan;
therefore, no special accommodation for different regions of the world is required for this PHY layer.
However, due to the inclusion of the DOCSIS 3.0 PHY layers for backward compatibility purposes, there is still a need
for different region-specific physical layer technologies. Therefore, three options for physical layer technologies are
included in the present document, which have equal priority and are not required to be interoperable. One technology
option is based on the downstream channel identification plan that is deployed in North America using 6 MHz spacing.
The second technology option is based on the corresponding European multi-program television distribution. The third
technology option is based on the corresponding Chinese multi-program television distribution. All three options have
the same status, notwithstanding that the document structure does not reflect this equal priority. The first of these
options is defined in clauses 5 and 6 of [i.1], whereas the second is defined by replacing the content of those clauses
with the content of Annex C of [i.2]. The third is defined by replacing the content of those clauses with the content of
Annex D of [i.2]. Correspondingly, [13] and [i.3] apply only to the first option, and [4] applies to the second and third.
Compliance with the present document requires compliance with one of these implementations, but not with all three. It
is not required that equipment built to one option interoperates with equipment built to the other.
Compliance with frequency planning and EMC requirements is not covered by the present document and remains the
operators' responsibility. In this respect, [10] and [11] are relevant to the USA; [3] and [i.4] to Canada; [i.6], [5], [6],
[7], [8] and [9] are relevant to the European Union; [12] and [i.5] are relevant to China.
ANSI/SCTE 262-1 [1] defines the interface for the physical layer, and corresponds to the CableLabs specification
CM-SP-PHYv4.0-I02-200429 [i.1].

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    English language
    sale 15% off
  • Standardization document
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ES 203 811-4 V1.1.1:2023(Main)
Integrated broadband cable telecommunication networks (CABLE) - Sixth generation transmission systems for interactive cable television services - IP cable modem - Part 4: Cable modem operations support system interface - DOCSIS® 4.0 [ANSI/SCTE 262-3 2020]
ETSI ES 203 811-4 V1.1.1 (2022-09)

The present document provides the ETSI endorsement of ANSI/SCTE standard ANSI/SCTE 262-3 [1].
ANSI/SCTE 262-3 [1] is part of a series of standards that defines the sixth generation of high-speed data-over-cable
systems and is based on a set of specifications commonly referred to as DOCSIS 4.0 specifications. This generation of
the DOCSIS specifications builds upon the previous generations of DOCSIS specifications (commonly referred to as
the DOCSIS 3.1 and earlier specifications), leveraging the existing Media Access Control (MAC) and Physical (PHY)
layers with the addition of appropriate updates to the MAC and management layers to support new PHY functionality.
It includes backward compatibility for the existing PHY layers in order to enable a seamless migration to the new
technology.
ANSI/SCTE 262-3 [1] defines the interface of the operations support system for the cable modem, and corresponds to
the CableLabs specification CM-SP-CM-OSSIv4.0-I02-200311 [i.1].

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
  • Standardization document
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ES 203 811-1 V1.1.1:2023(Main)
Integrated broadband cable telecommunication networks (CABLE) - Sixth generation transmission systems for interactive cable television services - IP cable modem - Part 1: General - DOCSIS® 4.0
ETSI ES 203 811-1 V1.1.1 (2022-09)

The present document is part of a multi-part deliverable that defines the sixth generation of high-speed data-over-cable
systems and is based on a set of specifications commonly referred to as DOCSIS 4.0 specifications.
This generation of the DOCSIS specifications [i.1] to [i.5] builds upon the previous generations of DOCSIS
specifications (commonly referred to as the DOCSIS 3.1 and earlier specifications), leveraging the existing Media
Access Control (MAC) and Physical (PHY) layers. It includes backward compatibility for the existing PHY layers in
order to enable a seamless migration to the new technology. Further, the DOCSIS 4.0 specifications introduce Full
Duplex (FDX) DOCSIS PHY layer technology as an expansion of the OFDM PHY layer introduced in the DOCSIS 3.1
PHY specification to increase upstream capacity without significant loss of downstream capacity versus DOCSIS 3.1.
The DOCSIS 4.0 specification also builds upon DOCSIS 3.1 OFDM and OFDMA technology with an extended
Frequency Division Duplex (FDD) DOCSIS alternative. DOCSIS 4.0 FDD supports legacy high split and also provides
extended splits up to 684 MHz in an operational band plan which is referred to as Ultra-High Split (UHS). DOCSIS 4.0
FDD also introduces expansion of usable downstream spectrum up to 1 794 MHz. Both the FDX and FDD DOCSIS 4.0
alternatives are based on OFDM PHY. The DOCSIS 4.0 specifications also define appropriate updates to the MAC and
management layers to support new PHY functionality.

  • Standard
    13 pages
    English language
    sale 15% off
  • Standard
    13 pages
    English language
    sale 15% off
  • Standardization document
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ES 205 200-3-2 V1.1.1:2022(Main)
Access, Terminals, Transmission and Multiplexing (ATTM) - Carbon Intensity Management - Operational infrastructures - Implementation of Global KPIs - Part 3: ICT Sites - Sub-part 2: DCCM
ETSI ES 205 200-3-2 V1.1.1 (2022-04)

The present document specifies the requirements for a Global KPI for carbon management in operation (KPIDCCM) and
their underpinning Objective KPIs addressing the following objectives for the ICT sites of broadband deployment:
• Greenhouse gas emissions
• Effectiveness of energy generation over greenhouse gas emissions
• Avoided greenhouse gas emission
• Reused greenhouse gas emission
The management of energy efficiency is outside the scope of the present document.
Within the present document:
• clause 4.1 describes the energy parameters for ICT sites together with inclusions/exclusions of different
energies contributions;
• clause 4.2 specifies the requirements for measurement, calculation, classification and reporting of KPIDCCM.
The present document addresses CO2 equivalent emissions (CO2eq) resulting from energy consumption by operational
equipment in ICT sites or groups of sites. It does not deal with other GHG gas emissions coming from cooling/heating
(including heat recovery systems equipment leakages such as described in the Directive F-Gas EU-517-2014 [i.6] and
emissions related to manufacturing, transportation and end of life.
The Global KPI alone is not designed for comparison of ICT sites or groups of sites. It does not define an ICT site as
good or bad unless combined with other parameters considered relevant for a comparison, such as local climatic
conditions, availability requirements or purpose of the ICT site.
The present document relies on energy measurement and task effectiveness principles defined in standards ETSI
EN 305 200-3-1 [3] for data centres, ETSI EN 305 200-2-2 [1] for fixed networks and ETSI EN 305 200-2-3 [2] for
mobile networks.

  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    21 pages
    English language
    sale 15% off
  • Standardization document
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60728-115:2022(Main)
Cable networks for television signals, sound signals and interactive services - Part 115: In-building optical systems for broadcast signal transmissions (IEC 60728-115:2022)
EN IEC 60728-115:2022

This part of IEC 60728 is applicable to in-building optical transmission systems for broadcast signal transmission that consist of optical transmitter, optical amplifiers, splitters, V-ONUs, etc. These systems are primarily intended for television and sound signals using digital transmission technology. This document specifies the basic system parameters and methods of measurement for in-building optical distribution systems between building network interface (BNI) and home network interface (HNI) in order to assess the system performance and its performance limits.
This document is also applicable to broadcast signal transmission using a telecommunication network if it satisfies the requirements of optical section of this document. This document describes RF transmission for fully digitalized broadcast and narrowcast (limited area distribution of broadcast) signals over an FTTH network and introduces xPON system as a physical layer media. The detailed description of the physical layer is out of the scope of this document. The scope is limited to RF signal transmission over optical network, thus, it does not include IP transport technologies, such as IP Multicast and associate protocols.
This standard specifies the required system performance of all-optical building networks in order to connect with FTTH networks which are defined by IEC60728-113 and IEC60728-13-1. Use of In-building optical networks is very effective for saving cost (installation and maintenance) and enabling future network up-grades, especially in huge apartment buildings. In this document, the optical wavelengths and electrical frequency bands listed in Table 1 - and Table 2 - are considered to be used.
[Table 1 and Table 2]

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50083-2-4:2020(Main)
Cable networks for television signals, sound signals and interactive services - Part 2-4: Interference Mitigation Filters operating in the 700 MHz and 800 MHz bands for DTT reception
EN 50083-2-4:2019

This standard specifies the requirements for LTE filters that cover the 700 MHz band in addition to the 800 MHz band. These filters are to be used in individual and MATV antenna installations for reception of DTT signals when the 700 MHz band will be used by telecommunication services (LTE) in addition to the 800 MHz band.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ES 203 311-1 V1.1.1:2020(Main)
Integrated broadband cable telecommunication networks (CABLE) - Fourth generation transmission systems for interactive cable television services - IP cable modems - Part 1: General - DOCSIS® 3.1
ETSI ES 203 311-1 V1.1.1 (2019-05)

The present document is part of a series of specifications that defines the fourth generation of high-speed data-overcable
systems, commonly referred to as the DOCSIS 3.1 specifications. The standard was developed for the benefit of
the cable industry, and includes contributions by operators and vendors from North and South America, Europe and
Asia.
This generation of the DOCSIS specifications builds upon the previous generations of DOCSIS specifications
(commonly referred to as the DOCSIS 3.0 and earlier specifications), leveraging the existing Media Access Control
(MAC) and Physical (PHY) layers, but with the addition of a new PHY layer designed to improve spectral efficiency
and provide better scaling for larger bandwidths (and appropriate updates to the MAC and management layers to
support the new PHY layer). It includes backward compatibility for the existing PHY layers in order to enable a
seamless migration to the new technology.

  • Standard
    13 pages
    English language
    sale 15% off
  • Standard
    13 pages
    English language
    sale 15% off
  • Standardization document
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day