Industrial plate screens -- Part 1: Thickness of 3 mm and above

Describes three patterns using round (circular) and square perforations in low carbon steel plate of 3 mm thickness and above. The sizes of holes range from 125 to 3.15 mm inclusive. Five ratios of pitch to hole are prescribed which result in nominal open areas ranging from about 64 to 23 %.

Tôles perforées pour tamisage industriel -- Partie 1: Épaisseur égale ou supérieure à 3 mm

Industrijska ploščna sita - 1. del: Debelina 3 mm in več

General Information

Status
Published
Publication Date
31-May-1999
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jun-1999
Due Date
01-Jun-1999
Completion Date
01-Jun-1999

Buy Standard

Standard
ISO 7805-1:1984 - Industrial plate screens
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 7805-1:1999
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 7805-1:1984 - Tôles perforées pour tamisage industriel
French language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 7805-1:1984 - Tôles perforées pour tamisage industriel
French language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

7805/ 1
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATlON.MElK~YHAPOAHAR OPTAHM3AL&lR fl0 CTAH~APTbl3ALMM.ORGANlSATlON INTERNATIONALE DE NORMALISATION
Industrial plate screens -
Part 1: Thickness of 3 mm and above
T6les perforkes pour tamisage industriel - Partie I: Epaisseur &gale ou suphieure ;i 3 mm
First edition - 1984-04-15
Ref. No. IS0 7805/l-1984 (E)
UDC 621.928.028.2
Descriptors : sieves, sieve plates, sizing screens, hole size, designation.
0
Price based on 5 pages
v)

---------------------- Page: 1 ----------------------
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of developing International
Standards is carried out through IS0 technical committees. Every member body
interested in a subject for which a technical committee has been authorized has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 7805/ 1 was developed by Technical Committee ISO/TC 24,
Sieves, sieving and other sizing methods, and was circulated to the member bodies in
February 1983.
It has been approved by the member bodies of the following countries:
Australia Romania
Italy
Canada Japan South Africa, Rep. of
France Switzerland
Korea, Dem. P. Rep. of
Germany, F. R. Netherlands USSR
India Portugal
The member bodies of the following countries expressed disapproval of the document
on technical grounds :
Belgium
United K .ingdom
0 International Organization for Standardization, 1984
Printed in Switzerland

---------------------- Page: 2 ----------------------
IS0 7805/l-1984 (E)
INTERNATIONAL STANDARD
Industrial plate screens -
Part 1: Thickness of 3 mm and above
0 Introduction 3 Definitions
The purpose of this International Standard is to provide guid- For the purpose of this International Standard the definitions
ance for the development of national standards for industrial given in IS0 2395 and the following definition apply.
plate screens.
open area: Ratio of the total area occupied by the holes to the
overall area of the perforated part of the plate.
1 Scope and field of application
This part of IS0 7805 describes three patterns using round (cir-
cular) and square perforations in low carbon steel plate of 3 mm
4 Material and design
thickness and above; the sizes of holes ranging from 125 to
3,15 mm inclusive. Five ratios of pitch to hole are prescribed
which result in nominal areas ranging from about 64 to 23 %.
Tolerances for both hole and pitch are given. 4.1 Material
As this part of IS0 7805 provides a diversity of choice, it is The following requirements apply to perforated plates of low-
unlikely that every one of the many possible combinations of carbon steel. Plates made of other steels and non-ferrous
size of hole, pitch and plate thickness will be manufactured. metals may require different specifications apart from sizes of
The selection for national standards for industrial plate screens holes.
should be made from those combinations which suit the
products and screening methods in the country concerned.
4.2 Design
Industrial plate screens of thicknesses below 3 mm are dealt
with in IS0 7805/2.
4.2.1 Arrangement of holes
2 References
Three permissible arrangements of holes are illustrated in
figures 1 to 3; figure 1 for round holes in an equilateral triangle
IS0 3, Preferred numbers - Series of preferred numbers.
(60” staggered) arrangement; figures 2 and 3 for square holes
in line or at half pitch stagger.
IS0 2194, Wire screens and plate screens for industrial pur-
poses - Nominal sizes of apertures.
4.2.2 Size of holes w
IS0 2395, Test sieves and test sieving - Vocabulary.
The nominal sizes of round or square holes in industrial plate
IS0 3310/2, Test sieves - Technical requirements and testing
screens are tabulated in IS0 2194.
- Part 2: Metal perforated plate.
First choice shall be made from the R 10 series of preferred
IS0 780512, Industrialplate screens - Part 2: Thickness below
numbers, the second choice from the R 20 series. If necessary,
3 mm.‘)
choice may be made from the R 40 series.
IS0 7806, Industrial plate screens - Codification for
NOTE - The R 10 series of sizes is shown, by way of example, in
designating perforations.
tables 2 and 3.
1) At present at the stage of draft.
1

---------------------- Page: 3 ----------------------
Is0 7805/l-1984 (El
W
L-4
P
u
Figure 1 - Round holes : 60° staggered arrangement
(i.e. at the apices of equilateral triangles)
[Open area
= 0,9 bv/pPl
...

SLOVENSKI STANDARD
SIST ISO 7805-1:1999
01-junij-1999
,QGXVWULMVNDSORãþQDVLWDGHO'HEHOLQDPPLQYHþ
Industrial plate screens -- Part 1: Thickness of 3 mm and above
Tôles perforées pour tamisage industriel -- Partie 1: Épaisseur égale ou supérieure à 3
mm
Ta slovenski standard je istoveten z: ISO 7805-1:1984
ICS:
73.120 Oprema za predelavo rudnin Equipment for processing of
minerals
SIST ISO 7805-1:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 7805-1:1999

---------------------- Page: 2 ----------------------

SIST ISO 7805-1:1999
7805/ 1
International Standard
INTERNATIONAL ORGANIZATION FOR STANDARDIZATlON.MElK~YHAPOAHAR OPTAHM3AL&lR fl0 CTAH~APTbl3ALMM.ORGANlSATlON INTERNATIONALE DE NORMALISATION
Industrial plate screens -
Part 1: Thickness of 3 mm and above
T6les perforkes pour tamisage industriel - Partie I: Epaisseur &gale ou suphieure ;i 3 mm
First edition - 1984-04-15
Ref. No. IS0 7805/l-1984 (E)
UDC 621.928.028.2
Descriptors : sieves, sieve plates, sizing screens, hole size, designation.
0
Price based on 5 pages
v)

---------------------- Page: 3 ----------------------

SIST ISO 7805-1:1999
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of developing International
Standards is carried out through IS0 technical committees. Every member body
interested in a subject for which a technical committee has been authorized has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council.
International Standard IS0 7805/ 1 was developed by Technical Committee ISO/TC 24,
Sieves, sieving and other sizing methods, and was circulated to the member bodies in
February 1983.
It has been approved by the member bodies of the following countries:
Australia Romania
Italy
Canada Japan South Africa, Rep. of
France Switzerland
Korea, Dem. P. Rep. of
Germany, F. R. Netherlands USSR
India Portugal
The member bodies of the following countries expressed disapproval of the document
on technical grounds :
Belgium
United K .ingdom
0 International Organization for Standardization, 1984
Printed in Switzerland

---------------------- Page: 4 ----------------------

SIST ISO 7805-1:1999
IS0 7805/l-1984 (E)
INTERNATIONAL STANDARD
Industrial plate screens -
Part 1: Thickness of 3 mm and above
0 Introduction 3 Definitions
The purpose of this International Standard is to provide guid- For the purpose of this International Standard the definitions
ance for the development of national standards for industrial given in IS0 2395 and the following definition apply.
plate screens.
open area: Ratio of the total area occupied by the holes to the
overall area of the perforated part of the plate.
1 Scope and field of application
This part of IS0 7805 describes three patterns using round (cir-
cular) and square perforations in low carbon steel plate of 3 mm
4 Material and design
thickness and above; the sizes of holes ranging from 125 to
3,15 mm inclusive. Five ratios of pitch to hole are prescribed
which result in nominal areas ranging from about 64 to 23 %.
Tolerances for both hole and pitch are given. 4.1 Material
As this part of IS0 7805 provides a diversity of choice, it is The following requirements apply to perforated plates of low-
unlikely that every one of the many possible combinations of carbon steel. Plates made of other steels and non-ferrous
size of hole, pitch and plate thickness will be manufactured. metals may require different specifications apart from sizes of
The selection for national standards for industrial plate screens holes.
should be made from those combinations which suit the
products and screening methods in the country concerned.
4.2 Design
Industrial plate screens of thicknesses below 3 mm are dealt
with in IS0 7805/2.
4.2.1 Arrangement of holes
2 References
Three permissible arrangements of holes are illustrated in
figures 1 to 3; figure 1 for round holes in an equilateral triangle
IS0 3, Preferred numbers - Series of preferred numbers.
(60” staggered) arrangement; figures 2 and 3 for square holes
in line or at half pitch stagger.
IS0 2194, Wire screens and plate screens for industrial pur-
poses - Nominal sizes of apertures.
4.2.2 Size of holes w
IS0 2395, Test sieves and test sieving - Vocabulary.
The nominal sizes of round or square holes in industrial plate
IS0 3310/2, Test sieves - Technical requirements and testing
screens are tabulated in IS0 2194.
- Part 2: Metal perforated plate.
First choice shall be made from the R 10 series of preferred
IS0 780512, Industrialplate screens - Part 2: Thickness below
numbers, the second choice from the R 20 series. If necessary,
3 mm.‘)
choice may be made from the R 40 series.
IS0 7806, Industrial plate screens - Codification fo
...

Norme internationale 780511
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlEI+t~YHAPOQHAR OPfAHM3AUMR fIO CTAH~APTbl3A~Wl.ORGANISAilON INTERNATIONALE DE NORMALISATION
Tôles perforées pour tamisage industriel -
Partie 1: Épaisseur égale ou supérieure à 3 mn?
lndustrial plate screens - Part 1: Thickness of 3 mm and above
Première édition - 1984-04-15
CDU 621.928.028.2
Réf. no : ISO 7805/1-1984 (F)
Descripteurs : tamis, plaque perforée pour tamisage, crible, dimension du trou, désignation.
0
v)
Prix basé sur 5 pages

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 7805/1 a été élaborée par le comité technique ISO/TC 24,
Tamis, tamisage et autres méthodes de séparation granuîométrique, et a été soumise
aux comités membres en février 1983.
Les comités membres des pays suivants l’ont approuvée:
Afrique du Sud, Rép. d’
France Portugal
Allemagne, R. F. Inde Roumanie
Australie
Italie Suisse
Canada Japon URSS
Corée, Rép. dém. p. de Pays- Bas
Les comités membres des pays suivants l’ont désapprouvée pour
techniques :
Belgique
Royaume-Uni
l
0 Organisation internationale de normalisation, 1984
Imprimé en Suisse

---------------------- Page: 2 ----------------------
1s0 7805/1-1984 (FI
NORME INTERNATIONALE
Tôles perforées pour tamisage industriel -
Partie 1: Épaisseur égale ou supérieure à 3 mm
0 Introduction 3 Définitions
La présente Norme internationale a pour objet d’établir un Dans le cadre de la présente Norme internationale, les défini-
tions données dans I’ISO 2395 et la définition suivante sont
guide pour l’élaboration des normes nationales relatives aux
tôles perforées pour tamisage industriel. applicables.
vide: Rapport de l’aire totale occupée par les trous à I’airë
totale de la partie perforée de la tôle.
1 Objet et domaine d’application
La présente partie de I’ISO 7805 traite des perforations rondes
et carrées selon trois dispositions différentes dans les tôles en 4 Matériau et aspect
acier à faible teneur en carbone dont l’épaisseur est égale ou
supérieure à 3 mm. Les dimensions des trous varient entre 125
4.1 Matériau
et 3,15 mm. II est prescrit cinq rapports entraxekrou donnant
des vides nominaux variant approximativement de 64 à 23 %.
Les exigences suivantes sont applicables aux tôles perforées en
Les tolérances sur les dimensions des trous ainsi que sur les
entraxes sont données. acier à faible teneur en carbone. Des tôles composées d’autres
nuances d’aciers et de métaux non ferreux pourraient exiger
d’autres spécifications que celles des dimensions des trous.
La présente partie de I’ISO 7805 permet un grand nombre de
possibilités. II est peu probable que toutes les combinaisons
possibles des trous, entraxes et épaisseurs soient fabriquées.
Les normes nationales relatives aux tôles perforées pour tami-
4.2 Aspect
sage industriel devraient baser leur choix sur les combinaisons
appropriées aux produits et aux méthodes de tamisage courant
dans chaque pays particulier.
4.2.1 Dispositions des trous
Les tôles perforées pour tamisage industriel d’une épaisseur
Trois dispositions admissibles de trous sont représentées sur les
inférieure à 3 mm sont traitées dans I’ISO 7805/2.
figures 1 à 3; la figure 1 pour les trous ronds disposés en quin-
conce sur les sommets d’un triangle équilatéral (à angle
de 60”); les figures 2 et 3 pour les trous carrés disposés en
lignes ou en quinconce.
2 Références
ISO 3, Nombres normaux - Séries de nombres normaux.
4.2.2 Dimensions des trous w
ISO 2194, Toiles et feuilles ou plaques perforées pour tamisage
Dimensions nominales des ouvertures. Les dimensions nominales des trous ronds ou carrés dans les
industriel -
tôles perforées pour tamisage industriel sont indiquées sous
ISO 2395, Tamis et tamisage de contrôle - Vocabulaire.
forme de tableaux dans I’ISO 2194.
ISO 3310/2, Tamis de contrôle - Exigences techniques et véri-
Le premier choix doit se faire parmi les nombres normaux dans
fications - Partie 2: Tôles perforées métalliques.
la série R 10; le deuxième choix dans la série R 20. II est possi-
ble de faire son choix parmi les valeurs de la série R 40 si néces-
ISO 780512, Tôles perforées pour tamisage industriel -
saire.
Partie 2: Epaisseur inférieure à 3 mm.‘)
I SO 7806, Tôles perforées pour tamisage industriel - Codifica-
NOTE - La série R 10 des dimensions est indiquée, à titre d’exemple,
tion pour la désiignation des perforations.
dans les tableaux 2 et 3. .
1) Actuellement au stade de projet.

---------------------- Page: 3 ----------------------
ISO 7805/1-1984 (FI
Trous ronds dispos& en quinconce & angle de 60’
Figure 1 -
(c’est-à-dire sur les sommets d’un triangle équilatéral)
[vide =
0,9 ( wlp) 21
P P
W
2 2
L-J
P
H
Figure 3 - Trou
...

Norme internationale 780511
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlEI+t~YHAPOQHAR OPfAHM3AUMR fIO CTAH~APTbl3A~Wl.ORGANISAilON INTERNATIONALE DE NORMALISATION
Tôles perforées pour tamisage industriel -
Partie 1: Épaisseur égale ou supérieure à 3 mn?
lndustrial plate screens - Part 1: Thickness of 3 mm and above
Première édition - 1984-04-15
CDU 621.928.028.2
Réf. no : ISO 7805/1-1984 (F)
Descripteurs : tamis, plaque perforée pour tamisage, crible, dimension du trou, désignation.
0
v)
Prix basé sur 5 pages

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 7805/1 a été élaborée par le comité technique ISO/TC 24,
Tamis, tamisage et autres méthodes de séparation granuîométrique, et a été soumise
aux comités membres en février 1983.
Les comités membres des pays suivants l’ont approuvée:
Afrique du Sud, Rép. d’
France Portugal
Allemagne, R. F. Inde Roumanie
Australie
Italie Suisse
Canada Japon URSS
Corée, Rép. dém. p. de Pays- Bas
Les comités membres des pays suivants l’ont désapprouvée pour
techniques :
Belgique
Royaume-Uni
l
0 Organisation internationale de normalisation, 1984
Imprimé en Suisse

---------------------- Page: 2 ----------------------
1s0 7805/1-1984 (FI
NORME INTERNATIONALE
Tôles perforées pour tamisage industriel -
Partie 1: Épaisseur égale ou supérieure à 3 mm
0 Introduction 3 Définitions
La présente Norme internationale a pour objet d’établir un Dans le cadre de la présente Norme internationale, les défini-
tions données dans I’ISO 2395 et la définition suivante sont
guide pour l’élaboration des normes nationales relatives aux
tôles perforées pour tamisage industriel. applicables.
vide: Rapport de l’aire totale occupée par les trous à I’airë
totale de la partie perforée de la tôle.
1 Objet et domaine d’application
La présente partie de I’ISO 7805 traite des perforations rondes
et carrées selon trois dispositions différentes dans les tôles en 4 Matériau et aspect
acier à faible teneur en carbone dont l’épaisseur est égale ou
supérieure à 3 mm. Les dimensions des trous varient entre 125
4.1 Matériau
et 3,15 mm. II est prescrit cinq rapports entraxekrou donnant
des vides nominaux variant approximativement de 64 à 23 %.
Les exigences suivantes sont applicables aux tôles perforées en
Les tolérances sur les dimensions des trous ainsi que sur les
entraxes sont données. acier à faible teneur en carbone. Des tôles composées d’autres
nuances d’aciers et de métaux non ferreux pourraient exiger
d’autres spécifications que celles des dimensions des trous.
La présente partie de I’ISO 7805 permet un grand nombre de
possibilités. II est peu probable que toutes les combinaisons
possibles des trous, entraxes et épaisseurs soient fabriquées.
Les normes nationales relatives aux tôles perforées pour tami-
4.2 Aspect
sage industriel devraient baser leur choix sur les combinaisons
appropriées aux produits et aux méthodes de tamisage courant
dans chaque pays particulier.
4.2.1 Dispositions des trous
Les tôles perforées pour tamisage industriel d’une épaisseur
Trois dispositions admissibles de trous sont représentées sur les
inférieure à 3 mm sont traitées dans I’ISO 7805/2.
figures 1 à 3; la figure 1 pour les trous ronds disposés en quin-
conce sur les sommets d’un triangle équilatéral (à angle
de 60”); les figures 2 et 3 pour les trous carrés disposés en
lignes ou en quinconce.
2 Références
ISO 3, Nombres normaux - Séries de nombres normaux.
4.2.2 Dimensions des trous w
ISO 2194, Toiles et feuilles ou plaques perforées pour tamisage
Dimensions nominales des ouvertures. Les dimensions nominales des trous ronds ou carrés dans les
industriel -
tôles perforées pour tamisage industriel sont indiquées sous
ISO 2395, Tamis et tamisage de contrôle - Vocabulaire.
forme de tableaux dans I’ISO 2194.
ISO 3310/2, Tamis de contrôle - Exigences techniques et véri-
Le premier choix doit se faire parmi les nombres normaux dans
fications - Partie 2: Tôles perforées métalliques.
la série R 10; le deuxième choix dans la série R 20. II est possi-
ble de faire son choix parmi les valeurs de la série R 40 si néces-
ISO 780512, Tôles perforées pour tamisage industriel -
saire.
Partie 2: Epaisseur inférieure à 3 mm.‘)
I SO 7806, Tôles perforées pour tamisage industriel - Codifica-
NOTE - La série R 10 des dimensions est indiquée, à titre d’exemple,
tion pour la désiignation des perforations.
dans les tableaux 2 et 3. .
1) Actuellement au stade de projet.

---------------------- Page: 3 ----------------------
ISO 7805/1-1984 (FI
Trous ronds dispos& en quinconce & angle de 60’
Figure 1 -
(c’est-à-dire sur les sommets d’un triangle équilatéral)
[vide =
0,9 ( wlp) 21
P P
W
2 2
L-J
P
H
Figure 3 - Trou
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.