SIST IEC 60884-2-2:2010

SLOVENSKI STANDARD
SIST IEC 60884-2-2:2010
01-julij-2010
9WLþLLQYWLþQLFH]DJRVSRGLQMVWYDLQSRGREQHQDPHQHGHO3RVHEQH]DKWHYH
]DYWLþQLFH]DDSDUDWH
Plugs and socket-outlets for household and similar purposes - Part 2-2: Particular
requirements for socket-outlets for appliances
Ta slovenski standard je istoveten z: IEC 60884-2-2
ICS:
29.120.30 9WLþLYWLþQLFHVSRMNH Plugs, socket-outlets,
couplers
SIST IEC 60884-2-2:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST IEC 60884-2-2:2010

---------------------- Page: 2 ----------------------

SIST IEC 60884-2-2:2010


INTERNATIONAL IEC


STANDARD 60884-2-2





Second edition
2006-10


Plugs and socket-outlets for
household and similar purposes –
Part 2-2:
Particular requirements for socket-outlets
for appliances

© IEC 2006 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical,
including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
L
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue

---------------------- Page: 3 ----------------------

SIST IEC 60884-2-2:2010
60884-2-2 © IEC:2006 – 3 –
CONTENTS
FOREWORD.5

1 Scope.9
2 Normative references .9
3 Definitions .11
4 General requirements .11
5 General notes on tests .11
6 Ratings.11
7 Classification.13
8 Marking .13
9 Checking of dimensions.13
10 Protection against electric shock .13
11 Provision for earthing .13
12 Terminals and terminations .13
13 Construction of fixed socket-outlets .17
14 Construction of plugs and portable socket-outlets.17
15 Interlocked socket-outlets.17
16 Resistance to ageing, protection provided by enclosures, and resistance to
humidity .17
17 Insulation resistance and electric strength .17
18 Operation of earthing contacts.17
19 Temperature rise .17
20 Breaking capacity .17
21 Normal operation.17
22 Force necessary to withdraw the plug.17
23 Flexible cables and cords and their connection.19
24 Mechanical strength .19
25 Resistance to heat.21
26 Screws, current-carrying parts and connections.21
27 Creepage distances, clearances and distances through sealing compound .21
28 Resistance of insulating material to abnormal heat, to fire and to tracking .21
29 Resistance to rusting.21
30 Additional tests on pins provided with insulating sleeves .21

Table 101 – Forces to be applied to tabs .15
Table 102 – Relationship between tab size and rated current .15
Table 103 – Relationship between height of fall of pendulum and spring hammer
energy .19

---------------------- Page: 4 ----------------------

SIST IEC 60884-2-2:2010
60884-2-2 © IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD
AND SIMILAR PURPOSES –

Part 2-2: Particular requirements for
socket-outlets for appliances


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60884-2-2 has been prepared by subcommittee 23B: Plugs,
socket-outlets and switches, of IEC technical committee 23: Electrical accessories.
This second edition of IEC 60884-2-2 cancels and replaces the first edition published in 1989,
and constitutes a technical revision. The main changes from the previous edition are as
follows:
– alignment to IEC 60884-1 third edition;
– modification of Clause 12 to clarify the use of flat quick-connect terminations and for
looping in;
– modification of Clause 24 to refer to IEC 60068-2-75 for details of the test apparatus.

---------------------- Page: 5 ----------------------

SIST IEC 60884-2-2:2010
60884-2-2 © IEC:2006 – 7 –
The text of this standard is based on the following documents:
FDIS Report on voting
23B/830/FDIS 23B/847/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
This Part 2-2 is intended to be used in conjunction with IEC 60884-1. It was established on
the basis of the third edition (2002) of that standard.
This Part 2-2 supplements or modifies the corresponding clauses in IEC 60884-1, so as to
convert that publication into the IEC standard: Particular requirements for socket-outlets for
appliances.
When a particular subclause of Part 1 is mentioned in this Part 2-2, that subclause applies as
far as reasonable. Where this standard states “addition”, “modification” or “replacement”, the
relevant text of Part 1 is to be adapted accordingly.
In this standard the following print types are used:
– requirements proper: in roman type;
– test specification: in italic type;
– explanatory notes: in small roman type.
Subclauses and tables which are additional to those in Part 1 are numbered starting from 101.
When clauses of Part 1 are declared as applicable, they apply only where they contain
requirements concerning socket-outlets for appliances.
A list of all parts of the IEC 60884 series, under the general title Plugs and socket-outlets for
household and similar purposes, ca
...