Radio Equipment and Systems (RES); Attachment requirements for terminal equipment for Digital Enhanced Cordless Telecommunications (DECT) Generic Access Profile (GAP) applications

Technical charcteristics which shall be provided by terminal equipment which is capable of connection to a public telecommunications network (1) and which uses DECT cordless communications. These requirements shall apply to DECT equipment providing any telephony application. The cordless transmission of such terminal equipment operate within the frequency band 1880-1900 MHz. It shall apply in addition to the attachment requirements for the appropriate public network; and in addition to the CTRs for DECT General attachment requirement for telephony applications.  DECT comprises two equipment elements referred to as Fixed Part (FP) and Portable Part (PP).  The objective of this document is to ensure the air interface interoperability of DECT equipment capable of telephony applications, in such a way that any DECT FP conforming to the procedures described in this document shall be capable of interoperability with any DECT PP conforming to the procedures described in this document.  The FP and/or the PP shall conform to the requirements and tests in this document. This document is structured to allow type approval of the FP and PP as separate items. Where the DECT FP is connected to a PSTN, and where there are specific national variations in the requirements for voice telephony, these shall be accomodated within the FP so that the PP shall be common.  (1) Note 1: CTR for basic rate ISDN, CTR for primary rate ISDN, or national regulations (implementing  ETS 300 001) for PSTN. Inteconnection of DECT terminals to the GSM network is still under study; in due course, the scope statement may need amending to reflect this point. Note 2: It is expected that this document will be based on the radio and protocol provisions of ETS 300 175

Radijska oprema in sistemi (RES) - Priključitvene zahteve za terminalsko opremo za digitalne izboljšane brezvrvične telekomunikacije (DECT): Uporaba profila generičnega dostopa (GAP)

General Information

Status
Published
Publication Date
31-May-2000
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jun-2000
Due Date
01-Jun-2000
Completion Date
01-Jun-2000
Mandate

Buy Standard

Standardization document
P TBR 022:1998
English language
86 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standardization document
TBR 022:2000
English language
86 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
3SIST TBR 022:
01-DYJXVW
5DGLMVNDRSUHPDLQVLVWHPL 5(6 3ULNOMXþLWYHQH]DKWHYH]DWHUPLQDOVNRRSUHPR
]DGLJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH '(&7 8SRUDEDSURILOD
JHQHULþQHJDGRVWRSD *$3
Radio Equipment and Systems (RES); Attachment requirements for terminal equipment
for Digital Enhanced Cordless Telecommunications (DECT) Generic Access Profile
(GAP) applications
Ta slovenski standard je istoveten z: TBR 022 Edition 1
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
3SIST TBR 022: en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST TBR 022:2000

---------------------- Page: 2 ----------------------

SIST TBR 022:2000
TECHNICAL TBR 22
BASIS for January 1997
REGULATION
Source: ETSI TC-RES Reference: DTBR/RES-03055
ICS: 33.020
Key words: Access, DECT, type approval
Radio Equipment and Systems (RES);
Attachment requirements for terminal equipment for
Digital Enhanced Cordless Telecommunications (DECT)
Generic Access Profile (GAP) applications
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.fr
Tel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1997. All rights reserved.

---------------------- Page: 3 ----------------------

SIST TBR 022:2000
Page 2
TBR 22: January 1997
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST TBR 022:2000
Page 3
TBR 22: January 1997
Contents
Foreword .7
1 Scope .9
2 Normative references.9
3 Definitions and abbreviations .12
3.1 Definitions .12
3.2 Abbreviations .12
4 How to use this TBR.13
5 Requirements.13
5.1 Network (NWK) layer features.14
5.2 Data Link Control (DLC) layer services.16
5.3 Medium Access Control (MAC) layer services .17
5.4 Application features .18
5.5 PHysical (PH) layer requirements.18
6 Test specification .19
6.1 Portable Part (PP).19
6.1.1 NWK layer .19
6.1.1.1 Test suit structure.19
6.1.1.2 Test case index .21
6.1.2 DLC layer.28
6.1.2.1 Test suit structure.28
6.1.2.2 Test case index .29
6.1.3 MAC layer.31
6.1.3.1 Test suit structure.31
6.1.3.2 Test case index .33
6.1.4 PH layer.34
6.1.4.1 Normal Transmitted Power (NTP) .34
6.1.4.2 PP radio receiver sensitivity.34
6.1.4.3 Radio receiver interference performance .34
6.1.4.4 Receiver intermodulation performance.34
6.1.4.5 User controlled volume control .35
6.1.4.6 Additional test cases.35
6.2 Fixed Part (FP).36
6.2.1 NWK layer .36
6.2.1.1 Test suit structure.36
6.2.1.2 Test case index .38
6.2.2 DLC layer.44
6.2.2.1 Test suit structure.44
6.2.2.2 Test case index .45
6.2.3 MAC layer.47
6.2.3.1 Test suit structure.47
6.2.3.2 Test case index .48
6.2.4 PH layer.50
6.2.4.1 Normal Transmitted Power (NTP) .50
6.2.4.2 RFP radio receiver sensitivity .50
6.2.4.3 Radio receiver interference performance .50
6.2.4.4 Receiver intermodulation performance.50
6.2.4.5 Additional test cases.50
Annex A (normative): Requirements Tables (RT).51

---------------------- Page: 5 ----------------------

SIST TBR 022:2000
Page 4
TBR 22: January 1997
A.1 Introduction. 51
A.2 Portable Part (PP). 52
A.2.1 Tables for PP NWK layer . 52
A.2.1.1 Major Capabilities . 52
A.2.1.1.1 Entities . 52
A.2.1.1.2 CC features. 53
A.2.1.1.3 MM features . 54
A.2.1.1.4 SS features (services). 54
A.2.1.1.5 LCE features . 54
A.2.1.1.6 Procedures. 55
A.2.1.2 Messages . 57
A.2.1.2.1 Call control messages. 57
A.2.1.2.2 Mobility management messages . 57
A.2.1.2.3 Link control entity messages. 58
A.2.2 Tables for PP DLC layer.58
A.2.2.1 Capabilities . 58
A.2.2.1.1 Services . 58
A.2.2.1.2 Procedures. 59
A.2.2.2 Protocol PDUs . 60
A.2.2.2.1 C-plane PDUs . 60
A.2.2.2.2 C-plane messages. 61
A.2.2.2.3 U-plane PDUs . 61
A.2.3 Tables for PP MAC layer. 61
A.2.3.1 Major Capabilities . 61
A.2.3.1.1 Services . 61
A.2.3.1.1.1 Connection oriented control services . 61
A.2.3.1.1.2 Broadcast control services. 62
A.2.3.1.1.3 Multiplexing services . 62
A.2.3.1.1.4 Management services. 62
A.2.3.2 Procedures . 62
A.2.3.2.1 Connection setup procedures . 62
A.2.3.2.2 Connection data transfer procedures. 63
A.2.3.2.3 Connection handover procedures. 63
A.2.3.2.4 Connection release procedures . 63
A.2.3.2.5 Broadcast procedures. 63
A.2.3.2.6 CSF multiplexing procedures. 64
A.2.3.2.7 Layer management procedures. 64
A.2.3.3 Other capabilities . 64
A.2.4 Tables for PP PHL layer.64
A.2.4.1 Physical layer procedures. 64
A.2.5 Tables for PP Application requirements. 65
A.2.5.1 Application features . 65
A.2.5.2 Application Procedures. 65
A.3 Fixed Part (FP) . 66
A.3.1 Tables for FP NWK layer . 66
A.3.1.1 Major capabilities . 66
A.3.1.1.1 Entities . 66
A.3.1.1.2 CC features. 66
A.3.1.1.3 MM features . 68
A.3.1.1.4 SS features (services). 69
A.3.1.1.5 LCE features . 69
A.3.1.1.6 Procedures. 69
A.3.1.2 Messages . 72
A.3.1.2.1 Call control messages. 72
A.3.1.2.2 Mobility management messages . 73
A.3.1.2.3 Link control entity messages. 74
A.3.2 Tables for FP DLC layer.75
A.3.2.1 Capabilities . 75
A.3.2.1.1 Services . 75
A.3.2.1.2 Procedures. 75
A.3.2.2 Protocol PDUs . 77

---------------------- Page: 6 ----------------------

SIST TBR 022:2000
Page 5
TBR 22: January 1997
A.3.2.2.1 C-plane PDUs.77
A.3.2.2.2 C-plane messages.77
A.3.2.2.3 U-plane PDUs.77
A.3.3 Tables for FP MAC layer.78
A.3.3.1 Major Capabilities.78
A.3.3.1.1 Services.78
A.3.3.1.1.1 Connection oriented control services.78
A.3.3.1.1.2 Broadcast control services.78
A.3.3.1.1.3 Multiplexing services.78
A.3.3.1.1.4 Management services.79
A.3.3.2 Procedures.79
A.3.3.2.1 Connection setup procedures.79
A.3.3.2.2 Connection data transfer procedures .79
A.3.3.2.3 Connection handover procedures .80
A.3.3.2.4 Connection release procedures.80
A.2.3.2.5 Broadcast procedures .80
A.2.3.2.6 CSF multiplexing procedures .80
A.3.3.2.7 Layer management procedures.80
A.3.3.3 Other capabilities.81
A.3.4 Tables for FP PHL layer.81
A.3.4.1 Physical layer procedures .81
A.3.5 Tables for FP Application requirements.81
A.3.5.1 Application features.81
A.2.5.2 Application Procedures .81
Annex B (normative): Declarations on features supported .82
B.1 Introduction.82
B.2 Declarations for portable part.82
B.2.1 Network layer .82
B.3 Declarations for fixed part .84
B.3.1 Network layer .84
Annex C (informative): Bibliography.85
History.86

---------------------- Page: 7 ----------------------

SIST TBR 022:2000
Page 6
TBR 22: January 1997
Blank page

---------------------- Page: 8 ----------------------

SIST TBR 022:2000
Page 7
TBR 22: January 1997
Foreword
This Technical Basis for Regulation (TBR) has been produced by the Radio Equipment and Systems
(RES) Technical Committee of the European Telecommunications Standards Institute (ETSI).
Details of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI) may be
found in ETS 300 175, Parts 1 - 9 [1] to [9].

---------------------- Page: 9 ----------------------

SIST TBR 022:2000
Page 8
TBR 22: January 1997
Blank page

---------------------- Page: 10 ----------------------

SIST TBR 022:2000
Page 9
TBR 22: January 1997
1 Scope
This TBR specifies the technical characteristics which shall be provided by terminal equipment which is
capable of connection to a public telecommunications network (see note) and which uses DECT cordless
communications. These requirements shall apply to equipment providing any DECT telephony application.
The cordless transmissions for such terminal equipment operate within the frequency band
1880-1900 MHz.
This TBR shall apply in addition to the attachment requirements for the appropriate public network; and in
addition to the CTRs for DECT General attachmemt requirements and for telephony applications.
DECT comprises two equipment elements, referred to as Fixed Part (FP) and Portable Part (PP).
The objective of this TBR is to ensure the air interface interoperability of DECT equipment capable of
telephony applications, in such a way that any DECT PP conforming to the procedures described in this
TBR shall be capable of interoperability with any DECT FP conforming to the procedures described in this
TBR.
The FP and /or the PP shall conform to the requirements and tests in this TBR. This TBR is structured to
allow type approval of the FP and PP as separate items. Where the DECT FP is connected to a PSTN,
and where there are specific national variations in the requirements for voice telephony, these shall be
accommodated within the FP so that the PP shall be common.
NOTE: CTR for basic ISDN, CTR for primary rate ISDN, or national regulations (implementing
ETS 300 001) for PSTN. Interconnection of DECT terminal to GSM network is still
under study; in due course, the scope statement may need amending to reflect this
point.
This TBR is based on the radio and protocol provisions of ETS 300 175, Parts 1 to 8 [1] - [8].
2 Normative references
This TBR incorporates, by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this TBR only when incorporated in it by amendment or revision. For undated references the
latest edition of the publication referred to applies.
[1] ETS 300 175-1: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 1:
Overview".
[2] ETS 300 175-2: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 2: Physical
Layer".
[3] ETS 300 175-3: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium
Access Control (MAC) layer".
[4] ETS 300 175-4: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data
Link Control (DLC) layer".
[5] ETS 300 175-5: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network
(NWK) layer".
[6] ETS 300 175-6: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 6:
Identities and addressing".

---------------------- Page: 11 ----------------------

SIST TBR 022:2000
Page 10
TBR 22: January 1997
[7] ETS 300 175-7: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security
features".
[8] ETS 300 175-8: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 8: Speech
coding and transmission".
[9] ETS 300 175-9: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 9: Public
Access Profile (PAP)".
[10] ETS 300 444 (1995): "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Generic Access Profile (GAP)”.
[11] prETS 300 476-1 (1996): "Radio Equipment and Systems (RES); Digital
Enhanced Cordless Telecommunications (DECT); Common Interface (CI);
Protocol Implementation Conformance Statement (PICS) proforma; Part 1:
Network (NWK) layer - Portable radio Termination (PT)".
[12] prETS 300 476-2 (1996): "Radio Equipment and Systems (RES); Digital
Enhanced Cordless Telecommunications (DECT); Common Interface (CI);
Protocol Implementation Conformance Statement (PICS) proforma; Part 2: Data
Link Control (DLC) layer - Portable radio Termination (PT)".
[13] prETS 300 476-3 (1996): "Radio Equipment and Systems (RES); Digital
Enhanced Cordless Telecommunications (DECT); Common Interface (CI);
Protocol Implementation Conformance Statement (PICS) proforma; Part 3:
Medium Access Control (MAC) layer - Portable radio Termination (PT)".
[14] prETS 300 476-4 (1996): "Radio Equipment and Systems (RES); Digital
Enhanced Cordless Telecommunications (DECT); Common Interface (CI);
Protocol Implementation Conformance Statement (PICS) proforma; Part 4:
Network (NWK) layer - Fixed radio Termination (FT)".
[15] prETS 300 476-5 (1996): "Radio Equipment and Systems (RES); Digital
Enhanced Cordless Telecommunications (DECT); Common Interface (CI);
Protocol Implementation Conformance Statement (PICS) proforma; Part 5: Data
Link Control (DLC) layer - Fixed radio Termination (FT)".
[16] prETS 300 476-6 (1996): "Radio Equipment and Systems (RES); Digital
Enhanced Cordless Telecommunications (DECT); Common Interface (CI);
Protocol Implementation Conformance Statement (PICS) proforma; Part 6:
Medium Access Control (MAC) layer - Fixed radio Termination (FT)".
[17] prETS 300 476-7 (1996): "Radio Equipment and Systems (RES); Digital
Enhanced Cordless Telecommunications (DECT); Common Interface (CI);
Protocol Implementation Conformance Statement (PICS) proforma; Part 7:
Physical layer".
[18] prETS 300 474-1: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile
requirement list and profile specific Implementation Conformance Statement
(ICS) proforma; Part 1: Portable radio Termination (PT)".
[19] prETS 300 474-2: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile
requirement list and profile specific Implementation Conformance Statement
(ICS) proforma; Part 2: Fixed radio Termination (FT)".
[20] Reserved value.

---------------------- Page: 12 ----------------------

SIST TBR 022:2000
Page 11
TBR 22: January 1997
[21] ISO/IEC 9646-1 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 1:
General concepts". (See also CCITT Recommendation X.290 (1991)).
[22] ISO/IEC 9646-2 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 2:
Abstract test suite specification". (See also CCITT Recommendation X.291
(1991)).
[23] ISO/IEC 9646-3 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 3:
The tree and tabular combined notation". (See also CCITT Recommendation
X.292 (1992)).
[24] ISO/IEC 9646-4 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 4:
Test realisation". (See also CCITT Recommendation X.292 (1992)).
[25] ISO/IEC 9646-5 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 5:
Requirements on test laboratories and clients for the conformance assessment
process". (See also CCITT Recommendation X.292 (1992)).
[26] ISO/IEC 9646-6 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 6:
Protocol profile test specification".
[27] ISO/IEC 9646-7 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 7:
Implementation conformance statement".
[28] 91/263/EEC: "Council Directive of 29 April 1991 on the approximation of the
laws of the Member states concerning telecommunications terminal equipment,
including the mutual recognition of their conformity. (Terminal Directive)".
[29.40] Reserved values.
[41] I-ETS 300 176: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Approval test specification".
[42] TBR 6: "Radio Equipment and Systems (RES); Digital European Cordless
Telecommunications (DECT); General terminal attachment requirements".
[43] TBR 10: "Radio Equipment and Systems (RES); Digital European Cordless
Telecommunications (DECT); General terminal attachment requirements:
Telephony applications".
[44 . 46] Reserved values.
[47] prETS 300 497: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI) Test Case
Library (TCL)".
[48] prETS 300 494-1: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile
Test Specification (PTS); Part 1: Summary".
[49] prETS 300 494-2: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile
Test Specification (PTS); Part 2: Profile Specific Test Specification (PSTS) -
Portable radio Termination (PT)".

---------------------- Page: 13 ----------------------

SIST TBR 022:2000
Page 12
TBR 22: January 1997
[50] prETS 300 494-3: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile
Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) -
Fixed radio Termination (FT)".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of this TBR, the definitions given in ETS 300 444 [10] and ETS 300 175, Parts 1 to 7 [1]
to [7] apply:
3.2 Abbreviations
For the purposes of this TBR, the following abbreviations apply:
AC Authentication Code
ATS Abstract Test Suit
C Category
CC Call Control
CI Common Interface
CTR Common Technical Regulation
Cxxx Conditional under number "xxx"
DCK Derived Cipher Key
DECT Digital Enhanced Cordless Telecommunications
DLC Data Link Control
FP Fixed Part
FT Fixed radio Termination
GAP Generic Access Profile
I Out of scope
ICS Implementation Conformance Statement
IPUI International Portable User Identity
IUT Implementation Under Test
IXIT Implementation eXtra Information for Testing
LCE Link Control Entity
LLME Lower Layer Management Entity
LLN Logical Link Number
M Mandatory
MAC Medium Access Control
MM Mobility Management
N/A Not Applicable
NLF New Link Flag
NWK NetWorK
O Optional
PARK Portable Access Rights Key
PH PHysical
PICS Protocol Implementation Conformance Statement
PIXIT Protocol Implementation eXtra Information for Testing
PP Portable Part
PSTN Public Switched Telephone Network
PSTS Profile Specific Test Specification
PT Portable radio Termination
PTS Profile Test Specification
RT Requirements Tables
SARI Secondary Access Rights Identity
Sp Support
St Status
SUT System Under Test
TBR Technical Basis for Regulation
TPUI Temporary Portable User Identity
TS Test System
TSS&TP Test Suit Structure & Test Purposes

---------------------- Page: 14 ----------------------

SIST TBR 022:2000
Page 13
TBR 22: January 1997
4 How to use this TBR
This TBR contains one set of tables for the PP and one set of tables for the FP. E
...

SLOVENSKI STANDARD
SIST TBR 022:2000
01-junij-2000
5DGLMVNDRSUHPDLQVLVWHPL 5(6 3ULNOMXþLWYHQH]DKWHYH]DWHUPLQDOVNRRSUHPR
]DGLJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH '(&7 8SRUDEDSURILOD
JHQHULþQHJDGRVWRSD *$3
Radio Equipment and Systems (RES); Attachment requirements for terminal equipment
for Digital Enhanced Cordless Telecommunications (DECT) Generic Access Profile
(GAP) applications
Ta slovenski standard je istoveten z: TBR 022 Edition 1
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
SIST TBR 022:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST TBR 022:2000

---------------------- Page: 2 ----------------------

SIST TBR 022:2000
TECHNICAL TBR 22
BASIS for January 1997
REGULATION
Source: ETSI TC-RES Reference: DTBR/RES-03055
ICS: 33.020
Key words: Access, DECT, type approval
Radio Equipment and Systems (RES);
Attachment requirements for terminal equipment for
Digital Enhanced Cordless Telecommunications (DECT)
Generic Access Profile (GAP) applications
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.fr
Tel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1997. All rights reserved.

---------------------- Page: 3 ----------------------

SIST TBR 022:2000
Page 2
TBR 22: January 1997
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST TBR 022:2000
Page 3
TBR 22: January 1997
Contents
Foreword .7
1 Scope .9
2 Normative references.9
3 Definitions and abbreviations .12
3.1 Definitions .12
3.2 Abbreviations .12
4 How to use this TBR.13
5 Requirements.13
5.1 Network (NWK) layer features.14
5.2 Data Link Control (DLC) layer services.16
5.3 Medium Access Control (MAC) layer services .17
5.4 Application features .18
5.5 PHysical (PH) layer requirements.18
6 Test specification .19
6.1 Portable Part (PP).19
6.1.1 NWK layer .19
6.1.1.1 Test suit structure.19
6.1.1.2 Test case index .21
6.1.2 DLC layer.28
6.1.2.1 Test suit structure.28
6.1.2.2 Test case index .29
6.1.3 MAC layer.31
6.1.3.1 Test suit structure.31
6.1.3.2 Test case index .33
6.1.4 PH layer.34
6.1.4.1 Normal Transmitted Power (NTP) .34
6.1.4.2 PP radio receiver sensitivity.34
6.1.4.3 Radio receiver interference performance .34
6.1.4.4 Receiver intermodulation performance.34
6.1.4.5 User controlled volume control .35
6.1.4.6 Additional test cases.35
6.2 Fixed Part (FP).36
6.2.1 NWK layer .36
6.2.1.1 Test suit structure.36
6.2.1.2 Test case index .38
6.2.2 DLC layer.44
6.2.2.1 Test suit structure.44
6.2.2.2 Test case index .45
6.2.3 MAC layer.47
6.2.3.1 Test suit structure.47
6.2.3.2 Test case index .48
6.2.4 PH layer.50
6.2.4.1 Normal Transmitted Power (NTP) .50
6.2.4.2 RFP radio receiver sensitivity .50
6.2.4.3 Radio receiver interference performance .50
6.2.4.4 Receiver intermodulation performance.50
6.2.4.5 Additional test cases.50
Annex A (normative): Requirements Tables (RT).51

---------------------- Page: 5 ----------------------

SIST TBR 022:2000
Page 4
TBR 22: January 1997
A.1 Introduction. 51
A.2 Portable Part (PP). 52
A.2.1 Tables for PP NWK layer . 52
A.2.1.1 Major Capabilities . 52
A.2.1.1.1 Entities . 52
A.2.1.1.2 CC features. 53
A.2.1.1.3 MM features . 54
A.2.1.1.4 SS features (services). 54
A.2.1.1.5 LCE features . 54
A.2.1.1.6 Procedures. 55
A.2.1.2 Messages . 57
A.2.1.2.1 Call control messages. 57
A.2.1.2.2 Mobility management messages . 57
A.2.1.2.3 Link control entity messages. 58
A.2.2 Tables for PP DLC layer.58
A.2.2.1 Capabilities . 58
A.2.2.1.1 Services . 58
A.2.2.1.2 Procedures. 59
A.2.2.2 Protocol PDUs . 60
A.2.2.2.1 C-plane PDUs . 60
A.2.2.2.2 C-plane messages. 61
A.2.2.2.3 U-plane PDUs . 61
A.2.3 Tables for PP MAC layer. 61
A.2.3.1 Major Capabilities . 61
A.2.3.1.1 Services . 61
A.2.3.1.1.1 Connection oriented control services . 61
A.2.3.1.1.2 Broadcast control services. 62
A.2.3.1.1.3 Multiplexing services . 62
A.2.3.1.1.4 Management services. 62
A.2.3.2 Procedures . 62
A.2.3.2.1 Connection setup procedures . 62
A.2.3.2.2 Connection data transfer procedures. 63
A.2.3.2.3 Connection handover procedures. 63
A.2.3.2.4 Connection release procedures . 63
A.2.3.2.5 Broadcast procedures. 63
A.2.3.2.6 CSF multiplexing procedures. 64
A.2.3.2.7 Layer management procedures. 64
A.2.3.3 Other capabilities . 64
A.2.4 Tables for PP PHL layer.64
A.2.4.1 Physical layer procedures. 64
A.2.5 Tables for PP Application requirements. 65
A.2.5.1 Application features . 65
A.2.5.2 Application Procedures. 65
A.3 Fixed Part (FP) . 66
A.3.1 Tables for FP NWK layer . 66
A.3.1.1 Major capabilities . 66
A.3.1.1.1 Entities . 66
A.3.1.1.2 CC features. 66
A.3.1.1.3 MM features . 68
A.3.1.1.4 SS features (services). 69
A.3.1.1.5 LCE features . 69
A.3.1.1.6 Procedures. 69
A.3.1.2 Messages . 72
A.3.1.2.1 Call control messages. 72
A.3.1.2.2 Mobility management messages . 73
A.3.1.2.3 Link control entity messages. 74
A.3.2 Tables for FP DLC layer.75
A.3.2.1 Capabilities . 75
A.3.2.1.1 Services . 75
A.3.2.1.2 Procedures. 75
A.3.2.2 Protocol PDUs . 77

---------------------- Page: 6 ----------------------

SIST TBR 022:2000
Page 5
TBR 22: January 1997
A.3.2.2.1 C-plane PDUs.77
A.3.2.2.2 C-plane messages.77
A.3.2.2.3 U-plane PDUs.77
A.3.3 Tables for FP MAC layer.78
A.3.3.1 Major Capabilities.78
A.3.3.1.1 Services.78
A.3.3.1.1.1 Connection oriented control services.78
A.3.3.1.1.2 Broadcast control services.78
A.3.3.1.1.3 Multiplexing services.78
A.3.3.1.1.4 Management services.79
A.3.3.2 Procedures.79
A.3.3.2.1 Connection setup procedures.79
A.3.3.2.2 Connection data transfer procedures .79
A.3.3.2.3 Connection handover procedures .80
A.3.3.2.4 Connection release procedures.80
A.2.3.2.5 Broadcast procedures .80
A.2.3.2.6 CSF multiplexing procedures .80
A.3.3.2.7 Layer management procedures.80
A.3.3.3 Other capabilities.81
A.3.4 Tables for FP PHL layer.81
A.3.4.1 Physical layer procedures .81
A.3.5 Tables for FP Application requirements.81
A.3.5.1 Application features.81
A.2.5.2 Application Procedures .81
Annex B (normative): Declarations on features supported .82
B.1 Introduction.82
B.2 Declarations for portable part.82
B.2.1 Network layer .82
B.3 Declarations for fixed part .84
B.3.1 Network layer .84
Annex C (informative): Bibliography.85
History.86

---------------------- Page: 7 ----------------------

SIST TBR 022:2000
Page 6
TBR 22: January 1997
Blank page

---------------------- Page: 8 ----------------------

SIST TBR 022:2000
Page 7
TBR 22: January 1997
Foreword
This Technical Basis for Regulation (TBR) has been produced by the Radio Equipment and Systems
(RES) Technical Committee of the European Telecommunications Standards Institute (ETSI).
Details of the Digital Enhanced Cordless Telecommunications (DECT) Common Interface (CI) may be
found in ETS 300 175, Parts 1 - 9 [1] to [9].

---------------------- Page: 9 ----------------------

SIST TBR 022:2000
Page 8
TBR 22: January 1997
Blank page

---------------------- Page: 10 ----------------------

SIST TBR 022:2000
Page 9
TBR 22: January 1997
1 Scope
This TBR specifies the technical characteristics which shall be provided by terminal equipment which is
capable of connection to a public telecommunications network (see note) and which uses DECT cordless
communications. These requirements shall apply to equipment providing any DECT telephony application.
The cordless transmissions for such terminal equipment operate within the frequency band
1880-1900 MHz.
This TBR shall apply in addition to the attachment requirements for the appropriate public network; and in
addition to the CTRs for DECT General attachmemt requirements and for telephony applications.
DECT comprises two equipment elements, referred to as Fixed Part (FP) and Portable Part (PP).
The objective of this TBR is to ensure the air interface interoperability of DECT equipment capable of
telephony applications, in such a way that any DECT PP conforming to the procedures described in this
TBR shall be capable of interoperability with any DECT FP conforming to the procedures described in this
TBR.
The FP and /or the PP shall conform to the requirements and tests in this TBR. This TBR is structured to
allow type approval of the FP and PP as separate items. Where the DECT FP is connected to a PSTN,
and where there are specific national variations in the requirements for voice telephony, these shall be
accommodated within the FP so that the PP shall be common.
NOTE: CTR for basic ISDN, CTR for primary rate ISDN, or national regulations (implementing
ETS 300 001) for PSTN. Interconnection of DECT terminal to GSM network is still
under study; in due course, the scope statement may need amending to reflect this
point.
This TBR is based on the radio and protocol provisions of ETS 300 175, Parts 1 to 8 [1] - [8].
2 Normative references
This TBR incorporates, by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this TBR only when incorporated in it by amendment or revision. For undated references the
latest edition of the publication referred to applies.
[1] ETS 300 175-1: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 1:
Overview".
[2] ETS 300 175-2: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 2: Physical
Layer".
[3] ETS 300 175-3: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium
Access Control (MAC) layer".
[4] ETS 300 175-4: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 4: Data
Link Control (DLC) layer".
[5] ETS 300 175-5: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network
(NWK) layer".
[6] ETS 300 175-6: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 6:
Identities and addressing".

---------------------- Page: 11 ----------------------

SIST TBR 022:2000
Page 10
TBR 22: January 1997
[7] ETS 300 175-7: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security
features".
[8] ETS 300 175-8: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 8: Speech
coding and transmission".
[9] ETS 300 175-9: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 9: Public
Access Profile (PAP)".
[10] ETS 300 444 (1995): "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Generic Access Profile (GAP)”.
[11] prETS 300 476-1 (1996): "Radio Equipment and Systems (RES); Digital
Enhanced Cordless Telecommunications (DECT); Common Interface (CI);
Protocol Implementation Conformance Statement (PICS) proforma; Part 1:
Network (NWK) layer - Portable radio Termination (PT)".
[12] prETS 300 476-2 (1996): "Radio Equipment and Systems (RES); Digital
Enhanced Cordless Telecommunications (DECT); Common Interface (CI);
Protocol Implementation Conformance Statement (PICS) proforma; Part 2: Data
Link Control (DLC) layer - Portable radio Termination (PT)".
[13] prETS 300 476-3 (1996): "Radio Equipment and Systems (RES); Digital
Enhanced Cordless Telecommunications (DECT); Common Interface (CI);
Protocol Implementation Conformance Statement (PICS) proforma; Part 3:
Medium Access Control (MAC) layer - Portable radio Termination (PT)".
[14] prETS 300 476-4 (1996): "Radio Equipment and Systems (RES); Digital
Enhanced Cordless Telecommunications (DECT); Common Interface (CI);
Protocol Implementation Conformance Statement (PICS) proforma; Part 4:
Network (NWK) layer - Fixed radio Termination (FT)".
[15] prETS 300 476-5 (1996): "Radio Equipment and Systems (RES); Digital
Enhanced Cordless Telecommunications (DECT); Common Interface (CI);
Protocol Implementation Conformance Statement (PICS) proforma; Part 5: Data
Link Control (DLC) layer - Fixed radio Termination (FT)".
[16] prETS 300 476-6 (1996): "Radio Equipment and Systems (RES); Digital
Enhanced Cordless Telecommunications (DECT); Common Interface (CI);
Protocol Implementation Conformance Statement (PICS) proforma; Part 6:
Medium Access Control (MAC) layer - Fixed radio Termination (FT)".
[17] prETS 300 476-7 (1996): "Radio Equipment and Systems (RES); Digital
Enhanced Cordless Telecommunications (DECT); Common Interface (CI);
Protocol Implementation Conformance Statement (PICS) proforma; Part 7:
Physical layer".
[18] prETS 300 474-1: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile
requirement list and profile specific Implementation Conformance Statement
(ICS) proforma; Part 1: Portable radio Termination (PT)".
[19] prETS 300 474-2: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile
requirement list and profile specific Implementation Conformance Statement
(ICS) proforma; Part 2: Fixed radio Termination (FT)".
[20] Reserved value.

---------------------- Page: 12 ----------------------

SIST TBR 022:2000
Page 11
TBR 22: January 1997
[21] ISO/IEC 9646-1 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 1:
General concepts". (See also CCITT Recommendation X.290 (1991)).
[22] ISO/IEC 9646-2 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 2:
Abstract test suite specification". (See also CCITT Recommendation X.291
(1991)).
[23] ISO/IEC 9646-3 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 3:
The tree and tabular combined notation". (See also CCITT Recommendation
X.292 (1992)).
[24] ISO/IEC 9646-4 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 4:
Test realisation". (See also CCITT Recommendation X.292 (1992)).
[25] ISO/IEC 9646-5 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 5:
Requirements on test laboratories and clients for the conformance assessment
process". (See also CCITT Recommendation X.292 (1992)).
[26] ISO/IEC 9646-6 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 6:
Protocol profile test specification".
[27] ISO/IEC 9646-7 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 7:
Implementation conformance statement".
[28] 91/263/EEC: "Council Directive of 29 April 1991 on the approximation of the
laws of the Member states concerning telecommunications terminal equipment,
including the mutual recognition of their conformity. (Terminal Directive)".
[29.40] Reserved values.
[41] I-ETS 300 176: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Approval test specification".
[42] TBR 6: "Radio Equipment and Systems (RES); Digital European Cordless
Telecommunications (DECT); General terminal attachment requirements".
[43] TBR 10: "Radio Equipment and Systems (RES); Digital European Cordless
Telecommunications (DECT); General terminal attachment requirements:
Telephony applications".
[44 . 46] Reserved values.
[47] prETS 300 497: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI) Test Case
Library (TCL)".
[48] prETS 300 494-1: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile
Test Specification (PTS); Part 1: Summary".
[49] prETS 300 494-2: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile
Test Specification (PTS); Part 2: Profile Specific Test Specification (PSTS) -
Portable radio Termination (PT)".

---------------------- Page: 13 ----------------------

SIST TBR 022:2000
Page 12
TBR 22: January 1997
[50] prETS 300 494-3: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile
Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) -
Fixed radio Termination (FT)".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of this TBR, the definitions given in ETS 300 444 [10] and ETS 300 175, Parts 1 to 7 [1]
to [7] apply:
3.2 Abbreviations
For the purposes of this TBR, the following abbreviations apply:
AC Authentication Code
ATS Abstract Test Suit
C Category
CC Call Control
CI Common Interface
CTR Common Technical Regulation
Cxxx Conditional under number "xxx"
DCK Derived Cipher Key
DECT Digital Enhanced Cordless Telecommunications
DLC Data Link Control
FP Fixed Part
FT Fixed radio Termination
GAP Generic Access Profile
I Out of scope
ICS Implementation Conformance Statement
IPUI International Portable User Identity
IUT Implementation Under Test
IXIT Implementation eXtra Information for Testing
LCE Link Control Entity
LLME Lower Layer Management Entity
LLN Logical Link Number
M Mandatory
MAC Medium Access Control
MM Mobility Management
N/A Not Applicable
NLF New Link Flag
NWK NetWorK
O Optional
PARK Portable Access Rights Key
PH PHysical
PICS Protocol Implementation Conformance Statement
PIXIT Protocol Implementation eXtra Information for Testing
PP Portable Part
PSTN Public Switched Telephone Network
PSTS Profile Specific Test Specification
PT Portable radio Termination
PTS Profile Test Specification
RT Requirements Tables
SARI Secondary Access Rights Identity
Sp Support
St Status
SUT System Under Test
TBR Technical Basis for Regulation
TPUI Temporary Portable User Identity
TS Test System
TSS&TP Test Suit Structure & Test Purposes

---------------------- Page: 14 ----------------------

SIST TBR 022:2000
Page 13
TBR 22: January 1997
4 How to use this TBR
This TBR contains one set of tables for the PP and one set of tables for the FP. Each
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.